Passenger Cars 2021

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
Pacific Limited
Posts: 703
Joined: Sat Jan 22, 2011 10:46 pm
Contact:

Re: Passenger Cars 2021

Postby Pacific Limited » Sun Jun 07, 2026 11:23 pm

Nice stuff Rufus

User avatar
Rufus T. Firefly
Posts: 42209
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Passenger Cars 2021

Postby Rufus T. Firefly » Mon Jun 08, 2026 8:20 am

Thanks, guys!

That car was a lot of actual fun (thanks to clan DeBruin!).
Do not wait to strike till the iron is hot; but make it hot by striking.

User avatar
Rufus T. Firefly
Posts: 42209
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Passenger Cars 2021

Postby Rufus T. Firefly » Sun Jun 14, 2026 9:46 am

Bit of a rebuild exercise here. Shows what poor shipping + Fed-ex tossing the box about will do to a model, :roll: :roll:

Image

Image

Image

but I have the parts :? :? :lol:

Image

Matching the paint might the biggest challenge....
Do not wait to strike till the iron is hot; but make it hot by striking.

User avatar
Rufus T. Firefly
Posts: 42209
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Passenger Cars 2021

Postby Rufus T. Firefly » Sun Sep 13, 2026 8:59 am

This is coming along nicely.....

Image

Should be done in a week or 3 weather permitting.....and a decision regarding lettering, etc.
Do not wait to strike till the iron is hot; but make it hot by striking.

User avatar
Rufus T. Firefly
Posts: 42209
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Passenger Cars 2021

Postby Rufus T. Firefly » Sun Oct 04, 2026 10:38 am

And finished..... :wink: :wink:

Image

Image

Image

Working on a 2nd one of these baggage cars, although it's an outside door version, and then it's on to the Robico kit cars. Was looking that stack over..... 2 to repair thanks to crappy shipping, one to restore/repair and save, 3 unbuilt kits, and then 2-3 others that are either restore/repair or just get salvaged for castings/parts and toss the leftovers.
Do not wait to strike till the iron is hot; but make it hot by striking.

up148
Posts: 4788
Joined: Sat Nov 01, 2008 11:52 am

Re: Passenger Cars 2021

Postby up148 » Mon Oct 05, 2026 9:19 am

Nice job. Really resurrected that car.

User avatar
Rufus T. Firefly
Posts: 42209
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Passenger Cars 2021

Postby Rufus T. Firefly » Mon Oct 05, 2026 4:06 pm

This Baggage car was actually a scratchbuild exercise.

I'll be getting into the 19th century PRR Robico kit cars soon. Not sure what I'll be able to do with the rebuilt/restore cars - colors are mismatched and painting them to match might be a tricky adventure.
Do not wait to strike till the iron is hot; but make it hot by striking.

User avatar
Rufus T. Firefly
Posts: 42209
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Passenger Cars 2026

Postby Rufus T. Firefly » Tue Oct 27, 2026 10:08 am

One rebuilt mail car -- not much more I could do w/o taking it completely apart. This one had all the door and window castings painted some version of Tuscan which is probably too dark for the era.

Image

Image

Image

On to the next one on the series.
Do not wait to strike till the iron is hot; but make it hot by striking.

Nortonville Phil
Posts: 223
Joined: Sat Jul 31, 2010 11:05 pm
Location: Red Oak TX
Contact:

Re: Passenger Cars 2021

Postby Nortonville Phil » Tue Oct 27, 2026 3:39 pm

Nice cars . I have some similar. Perhaps when I start reworking them I can add them too this thread.
Trinity Valley Traction Co.
Texas Midland Railroad
Homewood Shops
Red Oak, TX

My traction blog: Bluebonnet Limited
http://bluebonnetlimited.blogspot.com/

Homewood Shops YouTube:
https://youtube.com/@cug6?si=BCFnDDtUw2eVKamo

User avatar
Rufus T. Firefly
Posts: 42209
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Passenger Cars 2021

Postby Rufus T. Firefly » Tue Oct 27, 2026 7:46 pm

Nortonville Phil wrote:Nice cars .


Thanks. The Robico cars that I am rebuilding are all a bit crudely assembled so I'm not ripping them all the way down and rebuilding in toto.
I should have another completed in a week or so. Once I get through the rebuilds, then I have the 3 unbuilt kits. Perhaps I can do better with those?

I have some similar. Perhaps when I start reworking them I can add them too this thread.


Yes. Please do!
Do not wait to strike till the iron is hot; but make it hot by striking.

up148
Posts: 4788
Joined: Sat Nov 01, 2008 11:52 am

Re: Passenger Cars 2021

Postby up148 » Wed Oct 28, 2026 9:19 am

I agree it looks great. Nice paint and decal work. Either I'm just noticing this era on EB or there has been an uptick of models available lately.

User avatar
Rufus T. Firefly
Posts: 42209
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Passenger Cars 2021

Postby Rufus T. Firefly » Wed Oct 28, 2026 10:36 am

up148 wrote:I agree it looks great. Nice paint and decal work.


Thanks! I think it's significantly better vs. the starting point and that my stopping point is "good enough" w/o making things worse.

Can;t take any credit on decal and lettering - that was all on the car and the sides sections are come pre-painted & lettered. I just cleaned those up a little.

Either I'm just noticing this era on EB or there has been an uptick of models available lately.


I'm not seeing that...... Maybe I need a different search algorithm in place? Where are you seeing cars of this era on EB?
Do not wait to strike till the iron is hot; but make it hot by striking.

up148
Posts: 4788
Joined: Sat Nov 01, 2008 11:52 am

Re: Passenger Cars 2021

Postby up148 » Thu Oct 29, 2026 9:28 am

Most likely just noticing this era due to your modeling posts on the forum. But, I see a lot of what appears to be late 19th and early 20th century train model, kits and items. They come up in my "O scale brass" even though many are not brass.

User avatar
Rufus T. Firefly
Posts: 42209
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Passenger Cars 2021

Postby Rufus T. Firefly » Sun Nov 01, 2026 12:44 pm

Rebuilt and touched up Robico PRR baggage car.

Image

Image

Image
Do not wait to strike till the iron is hot; but make it hot by striking.


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: Norton and 27 guests