Ebay Bargain? of the Week
Ebay Bargain? of the Week
https://www.ebay.com/itm/Overland-Model ... k:131:pf:0
Don't think I've ever seen this permutation!
Check out the 3 rail Doorstop on the 3 rail forum
Don't think I've ever seen this permutation!
Check out the 3 rail Doorstop on the 3 rail forum
Last edited by E7 on Sun Oct 14, 2018 10:25 pm, edited 1 time in total.
-
Jay Criswell
- Posts: 2004
- Joined: Thu Mar 06, 2008 12:38 pm
Re: Ebay Bargain? of the Week
...and free shipping too!
Does look like a pretty awesome model.
Does look like a pretty awesome model.
Re: Ebay Bargain? of the Week
will be interesting to watch how this goes. since PA type models are only getting 600.00 now . Far cry from
2800.00 when new.
Bill Basden
2800.00 when new.
Bill Basden
- Rufus T. Firefly
- Posts: 42227
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Ebay Bargain? of the Week
This particular model is very popular with HO scale collectors as an office display piece.

Better bargain: https://www.ebay.com/itm/273475546979
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: Ebay Bargain? of the Week
Crap no free shipping on the tank, the sellers an ***

Re: Ebay Bargain? of the Week
Yep it is awesome, not an O scale turntable long enough to turn it all in one.
Jay Criswell wrote:...and free shipping too!
Does look like a pretty awesome model.
-
bob turner
- Posts: 13675
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Ebay Bargain? of the Week
I have no special knowledge of this model, but early Overland was not soldered together well enough for more than very limited handling, and the mechanisms have a longevity of about twice around a good size oval.
Speaking of ovals, I have seen four real ones, including one at Lordsburg last week. I failed to jot down where, but I also saw a real double-track dogbone! My dream layout is a giant four track dogbone on two levels, with enough straight track to allow crossovers to all tracks. Well, except my 1 1/8" gauge track.
Speaking of ovals, I have seen four real ones, including one at Lordsburg last week. I failed to jot down where, but I also saw a real double-track dogbone! My dream layout is a giant four track dogbone on two levels, with enough straight track to allow crossovers to all tracks. Well, except my 1 1/8" gauge track.
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: Ebay Bargain? of the Week
had lots of arguments over prototype loops, and dogbones...and all that....and of course locally I win multiple times until the opposing party pulls a liberal hat trick and says "those don't count".
Heck, even just industrial reversing balloons.....but my dream was double track all around....and now I do....and placing under benchwork machines in place for all those crossovers..
Cannot quite sort out your balloon and oval in Lordsburg. There are tank cars, covered hoppers, and maybe bulkhead flats....almost seems storage.....and nothing stands out as a loading/unloading facility.
Heck, even just industrial reversing balloons.....but my dream was double track all around....and now I do....and placing under benchwork machines in place for all those crossovers..
Cannot quite sort out your balloon and oval in Lordsburg. There are tank cars, covered hoppers, and maybe bulkhead flats....almost seems storage.....and nothing stands out as a loading/unloading facility.
Dave....gone by invitation
Re: Ebay Bargain? of the Week
Bob this was the last turbine produced By OMI, they got it right and were excellent runners and built well.
BB
BB
bob turner wrote:I have no special knowledge of this model, but early Overland was not soldered together well enough for more than very limited handling, and the mechanisms have a longevity of about twice around a good size oval.
Speaking of ovals, I have seen four real ones, including one at Lordsburg last week. I failed to jot down where, but I also saw a real double-track dogbone! My dream layout is a giant four track dogbone on two levels, with enough straight track to allow crossovers to all tracks. Well, except my 1 1/8" gauge track.
Re: Ebay Bargain? of the Week
bob turner wrote:I have no special knowledge of this model, but early Overland was not soldered together well enough for more than very limited handling, and the mechanisms have a longevity of about twice around a good size oval.
They have ALL (importers) brought in their share of crap. Considering the transition from Japan to Korea and China, language barriers, and doing business half way around the world, I am amazed that some of this stuff gets done as well as it does. A final thought: How good were your first soldering attempts? My first project in 8th grade metal shop held together....and I only used about 50 pounds of solder.
bob turner wrote:Speaking of ovals, I have seen four real ones, including one at Lordsburg last week. I failed to jot down where, but I also saw a real double-track dogbone! My dream layout is a giant four track dogbone on two levels, with enough straight track to allow crossovers to all tracks. Well, except my 1 1/8" gauge track.
Check out CNJ's Bronx Terminal. You will see the wildest batch of track in a small area including two circles, and a lift out section to cross track that is in place. If you look across the water at the top of the photo you can see the Hell Gate bridge.
http://www.bronx-terminal.com/?p=5
Re: Ebay Bargain? of the Week
ScaleCraft wrote:had lots of arguments over prototype loops, and dogbones...and all that....and of course locally I win multiple times until the opposing party pulls a liberal hat trick and says "those don't count".
Dave,
Tell them when they become "Majority Financial Backers", they have a vote on what is valid in your track plan.
Or maybe just show 'Em that photo of the Bronx Terminal!
Rich
-
bob turner
- Posts: 13675
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Ebay Bargain? of the Week
I realize there is a learning curve. But don’t you think consumers of used stuff should be armed with some knowledge? Even if they didn’t ask? I am not saying it would be ok to stand in front of a used car lot and disparage their business practices, but if there were a forum dealing with, say, Ford Rangers, it would be fair game to point out that they have weak transmissions.
We deal with trains - I think early Overland can be discussed. And Cole is correct - later production seems of better quality. I wonder if it is quite as good as the seller thinks? I see nothing spectacular about my 2014 Overland PRR PA, and expect to get around $500 for it, test-run only.
What is a liberal hat trick? Denying the existence of a prototype oval? I think I just saw a famous conservative deny having said words for which several videos exist. Liberals have no claim to being the only persuasion that will deny obvious facts. Even if they deny ovals.
We deal with trains - I think early Overland can be discussed. And Cole is correct - later production seems of better quality. I wonder if it is quite as good as the seller thinks? I see nothing spectacular about my 2014 Overland PRR PA, and expect to get around $500 for it, test-run only.
What is a liberal hat trick? Denying the existence of a prototype oval? I think I just saw a famous conservative deny having said words for which several videos exist. Liberals have no claim to being the only persuasion that will deny obvious facts. Even if they deny ovals.
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: Ebay Bargain? of the Week
bob turner wrote:
What is a liberal hat trick? Denying the existence of a prototype oval? I think I just saw a famous conservative deny having said words for which several videos exist. Liberals have no claim to being the only persuasion that will deny obvious facts. Even if they deny ovals.
No....but they do excel at the endeavour. Same folks complain when a train didn't steer out of the way to avoid a collision with a car (or bus, or truck).
All you have to do is take some pills, watch the six o'clock news, and figure out where they got their information.
On loops and ovals...draw 'em a map, look it up on da google maps and show them....but oh, no.....
Dave....gone by invitation
-
bob turner
- Posts: 13675
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Ebay Bargain? of the Week
Well, I am politically and otherwise quite liberal in outlook. I try not to deny the existence of facts, even though most of what I say is - opinion.
Re: Ebay Bargain? of the Week
I recall seeing a fully detailed HO version of that Erie Bronx terminal as a portable modular layout at the NMRA National here a few years ago. It was rather small in size which accentuated the density of the track plan and severe curvature. It was beautifully done, all structures done to photographs and company plans and included copious actual photos and prototype track plan on display boards around it. The only way you could have improved it was if it had been in 1:48 (or better yet P48)
Back to our subject dejour, the coal turbine is such an obscurely weird model I'm surprised OMI went for it; I guess UP completionists insured they'd sell? that and off course they had produced a run of GN W-1 motors so they had the truck frames and chassis for the turbine carbody.
My favorite story on the prototype was when the coal turbine was running one would periodcially hear the loud ping of a blade failing and bouncing off the interior of the combustion housing.
I would rather have the W-1, they were beeeeyooootiful.
Back to our subject dejour, the coal turbine is such an obscurely weird model I'm surprised OMI went for it; I guess UP completionists insured they'd sell? that and off course they had produced a run of GN W-1 motors so they had the truck frames and chassis for the turbine carbody.
My favorite story on the prototype was when the coal turbine was running one would periodcially hear the loud ping of a blade failing and bouncing off the interior of the combustion housing.
I would rather have the W-1, they were beeeeyooootiful.
Political Consultant- Tap into the hidden powers of your public office, insure your future is jail free, well funded. Visit shock and awe upon your adversaries, dominate the media, thrill your followers. contact morbo@happydaysrhereagain.com
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 33 guests
