Ebay Bargain? of the Week

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Ebay Bargain? of the Week

Postby E7 » Sun Oct 14, 2018 9:43 pm

https://www.ebay.com/itm/Overland-Model ... k:131:pf:0

Don't think I've ever seen this permutation!

Check out the 3 rail Doorstop on the 3 rail forum
Last edited by E7 on Sun Oct 14, 2018 10:25 pm, edited 1 time in total.

Jay Criswell
Posts: 2004
Joined: Thu Mar 06, 2008 12:38 pm

Re: Ebay Bargain? of the Week

Postby Jay Criswell » Sun Oct 14, 2018 10:08 pm

...and free shipping too!

Does look like a pretty awesome model.

cole7015
Posts: 763
Joined: Wed May 06, 2009 2:48 pm

Re: Ebay Bargain? of the Week

Postby cole7015 » Sun Oct 14, 2018 10:57 pm

will be interesting to watch how this goes. since PA type models are only getting 600.00 now . Far cry from
2800.00 when new.

Bill Basden

User avatar
Rufus T. Firefly
Posts: 42227
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Ebay Bargain? of the Week

Postby Rufus T. Firefly » Mon Oct 15, 2018 7:38 am

This particular model is very popular with HO scale collectors as an office display piece.


Image

Better bargain: https://www.ebay.com/itm/273475546979
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

cole7015
Posts: 763
Joined: Wed May 06, 2009 2:48 pm

Re: Ebay Bargain? of the Week

Postby cole7015 » Mon Oct 15, 2018 12:35 pm

Crap no free shipping on the tank, the sellers an ***
:mrgreen: :mrgreen: :mrgreen: :oops: :oops: :oops:

cole7015
Posts: 763
Joined: Wed May 06, 2009 2:48 pm

Re: Ebay Bargain? of the Week

Postby cole7015 » Mon Oct 15, 2018 12:38 pm

Yep it is awesome, not an O scale turntable long enough to turn it all in one.

Jay Criswell wrote:...and free shipping too!

Does look like a pretty awesome model.

bob turner
Posts: 13675
Joined: Sat Jan 13, 2007 7:57 pm

Re: Ebay Bargain? of the Week

Postby bob turner » Mon Oct 15, 2018 1:11 pm

I have no special knowledge of this model, but early Overland was not soldered together well enough for more than very limited handling, and the mechanisms have a longevity of about twice around a good size oval.

Speaking of ovals, I have seen four real ones, including one at Lordsburg last week. I failed to jot down where, but I also saw a real double-track dogbone! My dream layout is a giant four track dogbone on two levels, with enough straight track to allow crossovers to all tracks. Well, except my 1 1/8" gauge track.

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: Ebay Bargain? of the Week

Postby ScaleCraft » Mon Oct 15, 2018 1:36 pm

had lots of arguments over prototype loops, and dogbones...and all that....and of course locally I win multiple times until the opposing party pulls a liberal hat trick and says "those don't count".

Heck, even just industrial reversing balloons.....but my dream was double track all around....and now I do....and placing under benchwork machines in place for all those crossovers..

Cannot quite sort out your balloon and oval in Lordsburg. There are tank cars, covered hoppers, and maybe bulkhead flats....almost seems storage.....and nothing stands out as a loading/unloading facility.
Dave....gone by invitation

cole7015
Posts: 763
Joined: Wed May 06, 2009 2:48 pm

Re: Ebay Bargain? of the Week

Postby cole7015 » Mon Oct 15, 2018 2:18 pm

Bob this was the last turbine produced By OMI, they got it right and were excellent runners and built well.

BB


bob turner wrote:I have no special knowledge of this model, but early Overland was not soldered together well enough for more than very limited handling, and the mechanisms have a longevity of about twice around a good size oval.

Speaking of ovals, I have seen four real ones, including one at Lordsburg last week. I failed to jot down where, but I also saw a real double-track dogbone! My dream layout is a giant four track dogbone on two levels, with enough straight track to allow crossovers to all tracks. Well, except my 1 1/8" gauge track.

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Ebay Bargain? of the Week

Postby E7 » Mon Oct 15, 2018 2:34 pm

bob turner wrote:I have no special knowledge of this model, but early Overland was not soldered together well enough for more than very limited handling, and the mechanisms have a longevity of about twice around a good size oval.


They have ALL (importers) brought in their share of crap. Considering the transition from Japan to Korea and China, language barriers, and doing business half way around the world, I am amazed that some of this stuff gets done as well as it does. A final thought: How good were your first soldering attempts? My first project in 8th grade metal shop held together....and I only used about 50 pounds of solder. :lol: :lol: :lol: :lol: :lol:

bob turner wrote:Speaking of ovals, I have seen four real ones, including one at Lordsburg last week. I failed to jot down where, but I also saw a real double-track dogbone! My dream layout is a giant four track dogbone on two levels, with enough straight track to allow crossovers to all tracks. Well, except my 1 1/8" gauge track.


Check out CNJ's Bronx Terminal. You will see the wildest batch of track in a small area including two circles, and a lift out section to cross track that is in place. If you look across the water at the top of the photo you can see the Hell Gate bridge.

http://www.bronx-terminal.com/?p=5

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Ebay Bargain? of the Week

Postby E7 » Mon Oct 15, 2018 3:25 pm

ScaleCraft wrote:had lots of arguments over prototype loops, and dogbones...and all that....and of course locally I win multiple times until the opposing party pulls a liberal hat trick and says "those don't count".


Dave,

Tell them when they become "Majority Financial Backers", they have a vote on what is valid in your track plan. :mrgreen:

Or maybe just show 'Em that photo of the Bronx Terminal!

Rich

bob turner
Posts: 13675
Joined: Sat Jan 13, 2007 7:57 pm

Re: Ebay Bargain? of the Week

Postby bob turner » Mon Oct 15, 2018 3:35 pm

I realize there is a learning curve. But don’t you think consumers of used stuff should be armed with some knowledge? Even if they didn’t ask? I am not saying it would be ok to stand in front of a used car lot and disparage their business practices, but if there were a forum dealing with, say, Ford Rangers, it would be fair game to point out that they have weak transmissions.

We deal with trains - I think early Overland can be discussed. And Cole is correct - later production seems of better quality. I wonder if it is quite as good as the seller thinks? I see nothing spectacular about my 2014 Overland PRR PA, and expect to get around $500 for it, test-run only.

What is a liberal hat trick? Denying the existence of a prototype oval? I think I just saw a famous conservative deny having said words for which several videos exist. Liberals have no claim to being the only persuasion that will deny obvious facts. Even if they deny ovals.

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: Ebay Bargain? of the Week

Postby ScaleCraft » Mon Oct 15, 2018 4:14 pm

bob turner wrote:
What is a liberal hat trick? Denying the existence of a prototype oval? I think I just saw a famous conservative deny having said words for which several videos exist. Liberals have no claim to being the only persuasion that will deny obvious facts. Even if they deny ovals.


No....but they do excel at the endeavour. Same folks complain when a train didn't steer out of the way to avoid a collision with a car (or bus, or truck).

All you have to do is take some pills, watch the six o'clock news, and figure out where they got their information.

On loops and ovals...draw 'em a map, look it up on da google maps and show them....but oh, no.....
Dave....gone by invitation

bob turner
Posts: 13675
Joined: Sat Jan 13, 2007 7:57 pm

Re: Ebay Bargain? of the Week

Postby bob turner » Mon Oct 15, 2018 8:52 pm

Well, I am politically and otherwise quite liberal in outlook. I try not to deny the existence of facts, even though most of what I say is - opinion.

User avatar
De Bruin
Posts: 991
Joined: Thu Jan 12, 2017 8:24 pm

Re: Ebay Bargain? of the Week

Postby De Bruin » Mon Oct 15, 2018 10:06 pm

I recall seeing a fully detailed HO version of that Erie Bronx terminal as a portable modular layout at the NMRA National here a few years ago. It was rather small in size which accentuated the density of the track plan and severe curvature. It was beautifully done, all structures done to photographs and company plans and included copious actual photos and prototype track plan on display boards around it. The only way you could have improved it was if it had been in 1:48 (or better yet P48)

Back to our subject dejour, the coal turbine is such an obscurely weird model I'm surprised OMI went for it; I guess UP completionists insured they'd sell? that and off course they had produced a run of GN W-1 motors so they had the truck frames and chassis for the turbine carbody.
My favorite story on the prototype was when the coal turbine was running one would periodcially hear the loud ping of a blade failing and bouncing off the interior of the combustion housing.

I would rather have the W-1, they were beeeeyooootiful.
Political Consultant- Tap into the hidden powers of your public office, insure your future is jail free, well funded. Visit shock and awe upon your adversaries, dominate the media, thrill your followers. contact morbo@happydaysrhereagain.com


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 46 guests