Fred Icken models

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
Carey Williams
Posts: 690
Joined: Sat Dec 24, 2016 3:10 pm

Fred Icken models

Postby Carey Williams » Mon May 01, 2017 11:06 pm

Hello O scale world

York was great this April ... complete with a small bit of O scale scattered around . I was very fortunate to pick up two Icken pieces .
The electric box cab give new meaning to "heavy" ... complete with two motors ,should pull just about anything that is placed behind it . The sides on the motor car a fine castings with nice detail. Both examples still retain the outside 3rd rail pick ups. Looking forward to running both in the near future.
Cheers Carey

IMG_2843.JPG
IMG_2843.JPG (1.72 MiB) Viewed 6221 times
IMG_2844.JPG
IMG_2844.JPG (1.35 MiB) Viewed 6221 times
IMG_2845.JPG
IMG_2845.JPG (1.74 MiB) Viewed 6221 times
IMG_2846.JPG
IMG_2846.JPG (1.67 MiB) Viewed 6221 times
IMG_2705.JPG
IMG_2705.JPG (1.98 MiB) Viewed 6221 times
IMG_2849.JPG
IMG_2849.JPG (1.65 MiB) Viewed 6221 times
IMG_2851.JPG
IMG_2851.JPG (1.31 MiB) Viewed 6221 times
IMG_2852.JPG
IMG_2852.JPG (1.61 MiB) Viewed 6221 times
IMG_2702.JPG
IMG_2702.JPG (1.82 MiB) Viewed 6221 times

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Fred Icken models

Postby E7 » Mon May 01, 2017 11:41 pm

Carey,

Looks like you hit the jackpot! They seem to be in excellent condition.

Rich

User avatar
R.K. Maroon
Posts: 3140
Joined: Tue Feb 22, 2011 9:20 pm

Re: Fred Icken models

Postby R.K. Maroon » Tue May 02, 2017 1:35 am

Carey, both Icken and Alexander sold the New Haven EY-3 boxcar. Your appears to be an Alexander version, which can be ascertained by the drive. The Alexander version is not common but not that rare either -- I have seen at least a dozen, owned by fellow modelers or otherwise sold on eBay. By comparison, I have never seen an Icken version other than in the catalog. Of course, if yours is marked Icken, that would be different.

And I agree with Rich, both of these are in very nice condition.

Jim
The link below any photo will display the image full size

stephen neill
Posts: 151
Joined: Thu Jun 23, 2016 6:16 pm

Re: Fred Icken models

Postby stephen neill » Tue May 02, 2017 11:45 am

Way to go Carey! Maybe I should start going to York. What other O scale did you see there?
Steve

Carey Williams
Posts: 690
Joined: Sat Dec 24, 2016 3:10 pm

Re: Fred Icken models

Postby Carey Williams » Tue May 02, 2017 3:53 pm

Hello all
Thank you for your kind words . Alexander used the same illustration of the cab in their 1937 catalog... I've found early Icken literature with chain drive listed ( as seen on Powered car) and later mention all gear drive . Were Icken and Alexander selling the same product ? ..Icken mentions the top reverse unit as is on this engine . Both pieces have the same 3 rd rail pick up shoe ... but no signs of Icken's name of box cab .

Attached photos ... a box cab working the Westchester Railway Club layout from August 1936 Model Railroading ...Alexander's old layout he donated to help form the club.
Also photo of Ed Alexander with his hand partially hiding a similar box cab.

And page from Icken catalog with one of the drive mech used ..from undated catalog at the TCA library.

There seems to have been a large layout / collection of older stuff that was broken up in NJ .... that found it's way to York in the hands of several dealers... many older freights ...( I'll post a few photos later of the ones I bought ) .. a number of steamers with out side 3rd rail and some with out ... pieces from the 50's ? and a few KMT with shoes added .... so old but not old enough ...
I flipped over every O scale car I could find searching for Egolf ... or any other early makers .. no luck on any Egolf pieces ..

Looking forward to York in the fall for more freight car flipping and the search for 3rd rail chairs ...( one small bag was found this meet!!!!) . Fortunately old O scale remains a relative bargain compared to many tinplate pieces .

Cheers Carey


box cab cover aug 1936  MR.jpg
box cab cover aug 1936 MR.jpg (1.06 MiB) Viewed 6135 times
box cab aug 1936  MR.jpg
box cab aug 1936 MR.jpg (1.18 MiB) Viewed 6135 times
Ed  with O scale   TCA Q  2007 april.jpg
Ed with O scale TCA Q 2007 april.jpg (46.58 KiB) Viewed 6135 times
Power truck TCA.jpg
Power truck TCA.jpg (895.86 KiB) Viewed 6135 times

stephen neill
Posts: 151
Joined: Thu Jun 23, 2016 6:16 pm

Re: Fred Icken models

Postby stephen neill » Tue May 02, 2017 7:45 pm

Carey -

I have a catalog for The American Model Railroad Company (Alexander) that is not dated but says it is the seventh catalog. On page 13 of that catalog is a picture of a New Haven box cab; it certainly appears to be the same picture as you show above in the Icken catalog; not just the same engine, the same picture, and of course the engine number is the same.

It certainly appears that both Icken and Alexander were selling box cabs with the same body; I can not comment on the drives as I have not researched them; but from Jim's comment it seems that each developed their own drive for the engine.

I have another catalog for The American Model Railroad Company, undated, that says on the cover "THIS, the second edition of the first Scale Model Railroad catalog in America, has been ....". On the first page it says "We are agents for or can supply the goods of: Icken-Barker Models R. D. Barr ..."
Icken-Barker Models is the early name for Icken Model Company: the address shown is Oritan Avenue, Ridgefield, N. J.

Steve

bob turner
Posts: 13675
Joined: Sat Jan 13, 2007 7:57 pm

Re: Fred Icken models

Postby bob turner » Wed May 03, 2017 12:13 am

I have the pair that used to belong to Watty House.

Carey Williams
Posts: 690
Joined: Sat Dec 24, 2016 3:10 pm

Re: Fred Icken models

Postby Carey Williams » Thu May 11, 2017 11:52 am

Hello Icken fans

Fortuitous ad ....

IMG_3008.JPG
IMG_3008.JPG (1.67 MiB) Viewed 6018 times

Carey Williams
Posts: 690
Joined: Sat Dec 24, 2016 3:10 pm

Re: Fred Icken models

Postby Carey Williams » Wed Sep 13, 2017 12:23 pm

Hello all

I've been having fun trying to get the bricks to move .....in anticipation of the Indy show .

Here is a link to see the Alexander box cab spring into action .

Come to Indy to see all the the action "live" .
Cheers Carey

https://ogrforum.ogaugerr.com/topic/ind ... 4404477603

1wrenchturner
Posts: 1
Joined: Mon Feb 12, 2018 3:36 pm

Re: Fred Icken models

Postby 1wrenchturner » Tue Feb 13, 2018 9:24 pm

HI Carey,
I have two of the Icken boxcabs brand new and unbuilt. There are no motors, just the raw castings with bronze pantographs as well. It also seems that there are at least two versions of the Icken boxcab. I have a catalogue that has one picture then there are your photos and my castings. Both different. Any help with that? Did they change castings somewhere along the line? Can you shed some light? Let me know.
Thanks


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 46 guests