The Tridaily Doorstop -- Bob's Mexicano Electric

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop #20 -- Alexander 70-ton 3-Bay Hopper

Postby R.K. Maroon » Mon Apr 25, 2022 11:03 pm

Here is one of BN doorstop hoppers to which Dave is referring:

Image

This one is a quad, and presence of the fine rivets identifies it as a Min-I-Scale model. I like these but they are 17/64s and weigh over two pounds, which I find at or beyond the limits for an operating railroad (at least one that runs long trains, as is my want).

As to whether this finish is appropriate is debatable, but here is my two-cents worth: I preserve original finishes when I can do so without undo effort. However, if a car must be refinished then it's "modeler's choice". I do sniff when a model is obviously to old or new for a particular road name or operating scenario, but (without doing any research), I would take even odds that BN had quad hoppers (and probably a LOT of them). However, I wouldn't choose BN mainly because I don't generally model that era. This brings up a good question regarding this GN hopper and its three brothers: Who is (or was) the O-scale modeler that modeled the BN era that was willing to lug around four cars that together weigh about nine pounds? Were they going to pull them with their Atlas BN F9?
The link below any photo will display the image full size

User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop #20 -- Alexander 70-ton 3-Bay Hopper

Postby R.K. Maroon » Tue Apr 26, 2022 12:07 am

Found this photo in the files:

Image

1/4" Alexander 3-bay on top, 17/64" Min-I-Scale quad below. Both cars are 70-tonners. I don't know that the lengths of the prototypes are the same, but I would expect the difference in length to be about right for the difference in scale.
The link below any photo will display the image full size

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop #20 -- Alexander 70-ton 3-Bay Hopper

Postby bob turner » Tue Apr 26, 2022 1:40 am

What fun! My Min-I-Scale hopper is long gone, but I have a fleet of K-Lines,which looka lot like the venerable Lionel hopper.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop #20 -- Alexander 70-ton 3-Bay Hopper

Postby bob turner » Tue Apr 26, 2022 1:58 am

Lionel - I have two!

Image

User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop #20 -- Alexander 70-ton 3-Bay Hopper

Postby R.K. Maroon » Tue Apr 26, 2022 9:57 pm

Here is the underside of the Alexander 3-bay hopper:

Image

The initials A.J.K. stand for Al Kamm, whom I believe I have mentioned before. I am lucky enough to have several of his models. By good chance, his grandson (Al Kamm 3) contacted me after reading one of my OST columns with some information on Bill Lenoir. He said that many of the models marked A.J.K. could be from his dad, Al Kamm Jr. (three generations of O-scalers!). Al Junior did a lot of 2-rail conversions and restoration of older models with Carroll Repasi, whose name I often hear in reference to Bob Smith of Central Locomotive Works. The date on this hopper is 1937. That might make one think this is the work of Al Kamm, Sr. However, the finish on this is too nice to be that old. That makes me think that maybe Al Junior was marking the models he restored with their original manufacturing date, just to let people know how old they were.

The trucks on the hopper are original Alexanders:

Image

I have two of these hoppers, and they will be featured prominently whenever the Lobaugh DL&W Challenger makes it into revenue service.

Jim
The link below any photo will display the image full size

User avatar
De Bruin
Posts: 992
Joined: Thu Jan 12, 2017 8:24 pm

Postby De Bruin » Tue Apr 26, 2022 11:00 pm

Maroon, I'd be lying if I told you I wasn't in interested in that 4-chute Min-I-Scale BN hopper, so friggin cool!
To expand if actually running freight train consists that you pay attention too and you can period match a car like this to a more modern scenario.....pure serendipity
right?
Love it!
Political Consultant- Tap into the hidden powers of your public office, insure your future is jail free, well funded. Visit shock and awe upon your adversaries, dominate the media, thrill your followers. contact morbo@happydaysrhereagain.com

User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop #20 -- Alexander 70-ton 3-Bay Hopper

Postby R.K. Maroon » Wed Apr 27, 2022 10:48 pm

De Bruin wrote:I'd be lying if I told you I wasn't in interested in that 4-chute Min-I-Scale BN hopper

Pete, I am sure the BN hoppers can be routed through Atlanta. The paint and decals on them are really pretty good, so I would rather they get used as is instead of stripped and repainted for my purposes.

Here is the Alexander 3-bay hopper as it appeared in the 1937 Alexander catalog:

Image

A Big Four hopper is shown in the photo, but note that Lackawanna is indeed listed as one of the roads that used these. A quick internet search verifies that indeed the DL&W had triples:

Image

A half-dozen or more of these would be OK with me. I actually have some unpainted -- just need to find decals (and the time to make them a project).
The link below any photo will display the image full size

User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop #21 -- Scale Model Railways PFE Reefer

Postby R.K. Maroon » Sat Apr 30, 2022 2:44 pm

#21 -- Scale Model Railways PFE Reefer

I posted a SMR cast-aluminum boxcar earlier (TTD #12). There were several other cars in the SMR cast-AL series, including a reefer. Here is one, decorated for WP/PFE and in good condition:

Image

Image

I would guess something like 1 out of 20 (5%) of the O-scale PFE cars I have seen are lettered for WP. I just checked on line and, from what I gather, the 5% number is a rough match to the proportions of the prototype, which was 7.7% at its peak and about 3% at its low point (just before WP became a fallen flag). I may have more than 5% in my own PFE fleet, but I am not going to loose any sleep over that.

Jim
The link below any photo will display the image full size

User avatar
De Bruin
Posts: 992
Joined: Thu Jan 12, 2017 8:24 pm

Re: The Tridaily Doorstop #21 -- Scale Model Railways PFE Reefer

Postby De Bruin » Sat Apr 30, 2022 7:21 pm

Good looking car, nicely rendered scheme and those ice hatches are exquisite. Assume ends made from aluminum too? how are they attached? Do you have any exploded views or assembly instructions for these or were they always sold built/assembled/finished?
Political Consultant- Tap into the hidden powers of your public office, insure your future is jail free, well funded. Visit shock and awe upon your adversaries, dominate the media, thrill your followers. contact morbo@happydaysrhereagain.com

User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop #21 -- Scale Model Railways PFE Reefer

Postby R.K. Maroon » Sun May 01, 2022 3:59 pm

Pete, the sides, ends, roof, and chassis frame are all cast aluminum. As there were no consumer epoxy adhesives in the pre-war era, there were only two practical choices for assembling aluminum models. The more common way was to provide tabs on the casting pieces and screwing the castings together. The other method was to provide a wood sub-frame and either screwing or pinning (nailing) the castings to the wood. The SMR line used the latter, with escutcheon pins used to attach the sides, roof, and ends to the wood frame. I will look for a photo or assembly instructions.

Here is an underside shot:

Image

It's a little hard to see, but the chassis is screwed to the wood floor.

I wasn't sure what actually definition of an escutcheon pin was, so I looked it up: A decorative nail with a round, domed head, usually made of, or plated with, brass or copper, and used for fastening escutcheons, label-card holders, or other decorative surface hardware to wood surfaces. That sounds right to me. To go one further, an escutcheon is a shield or emblem bearing a coat of arms or a flat piece of metal for protection and often ornamentation, around a keyhole, door handle, or light switch. Inquiring minds want to know.

Jim
The link below any photo will display the image full size

User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop #21 -- Scale Model Railways PFE Reefer

Postby R.K. Maroon » Mon May 02, 2022 8:54 pm

Pete had asked if I had a copy of the assembly instructions. I might, as I have a large number of instruction sheets and blueprints that people have sent me over the years. I have not catalogued these (yet?). so finding any one specific item is a scavenger hunt of sorts. I did find a photo of what the kit looked like:

Image

This is from the 1940 Megow catalog. You can see the instructions (rolled up) in the upper left, the wood pieces for the substructure to the upper right, and the cast pieces to the left and lower left. Note also, by chance, that the decals shown are for PFE -- but the standard UP/SP PFE, not WP. This is confirmed by the listing for that specific car in the same catalog:

Image

I have seen maybe a dozen or more of these reefers over the years, but none with the original paint or decals, as far as I can remember.
The link below any photo will display the image full size

User avatar
De Bruin
Posts: 992
Joined: Thu Jan 12, 2017 8:24 pm

Re: The Tridaily Doorstop #21 -- Scale Model Railways PFE Reefer

Postby De Bruin » Mon May 02, 2022 11:56 pm

Really nice kit, with some more recent construction techniques I'd think you could take this pretty far into the finer scale realm too.
WOW! Not a doorstop by my measure.
Political Consultant- Tap into the hidden powers of your public office, insure your future is jail free, well funded. Visit shock and awe upon your adversaries, dominate the media, thrill your followers. contact morbo@happydaysrhereagain.com

User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop #21 -- Scale Model Railways PFE Reefer

Postby R.K. Maroon » Tue May 03, 2022 11:43 pm

Here is a 3/4 view of another SMR-Megow reefer. The paint is not as pristine as on the PFE version, so the rivets and other details are a little easier to see:

Image

I can't think of a cast aluminum model from before the war that is better detailed or has castings as crisp as these. Still, the ladders, grab irons, door hardware, and other details are part of the casting, so there would be a good deal of work to really upscale these. But I would take more just like them if they showed up on the interchange track.

Jim
The link below any photo will display the image full size

User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop #22 -- Lobaugh ATSF Stock Car

Postby R.K. Maroon » Thu May 05, 2022 2:53 pm

#22 -- Lobaugh ATSF Stock Car

Like Scale-Craft and Alexander, Lobaugh catalogued stock cars with cast-aluminum sides:

Image

Image

Unlike Scale-Craft and Alexander, Lobaugh had more than one cast stock car model. The ATSF car shown is a 40-ft car. There was also a 36-ft car. Bob has at least one. I have a set of the 36-ft sides, but not a complete car. Either size is rare -- I have seen maybe a half-dozen of the 40-footers and maybe two or three of the 36-ft cars.

The car shown was finished by John Fisher, and is one of two that he did.

Jim
The link below any photo will display the image full size

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop #22 -- Lobaugh ATSF Stock Car

Postby bob turner » Thu May 05, 2022 3:12 pm

The SMR cars really get to me - I had no idea until last year, when I captured one for cheap on eBay. For 1938, I rank these right on up there. I would have more, except the Greek would have me move out.

Yes to the Lobaugh stock cars - I think I have seven. Photos as soon as I load them into Shutterfly.

I note that all the Lobaugh stock cars I have show the floor planks extending out on top of the lower side plank. That, according to a long-time Lobaugh collector (now gone) is how you identify them.

Maroon has mastered the art of photography - time for him to write the definitive coffee table book.


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 56 guests