Diesel Projects

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
Rufus T. Firefly
Posts: 42229
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Diesel Projects

Postby Rufus T. Firefly » Sat Jul 26, 2025 11:47 am

De Bruin wrote: Anyway your "Amtrak #5" appears listed per below.


Except the one pictured in the advert looks to be a 6 wheel critter and mine is a 4 wheel w/o the tank on back. Have to think that maybe mine is a bash-off using the King body. That drive under mine looks nothing like a King drive that I've seen as yet.

As an aside, the drive/truck on your #09 looks very similiar to the Walthers MU and Gas Electric truck drives which I also associate with some of those IMP JNR models.


I suspect that the KWR drive was sourced similarly to the IMP stuff that KTM was producing, perhaps even from the same shop. I've had a number of the KTM/IMP boxcabs (and a few King ones...) through my shop - all that I have kept have been converted to other drive systems.

I should probably sell off this one pending my 1st finding something in the way of a small switcher that fits....
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
sarge
Posts: 5138
Joined: Thu Apr 02, 2009 2:21 pm
Location: Dungfield Manor

Re: Diesel Projects

Postby sarge » Sat Jul 26, 2025 12:11 pm

From the looks of it, I would more believe someone who knew what they were about just built that one for himself; not everything in this scale needs a commercial origin. GRIN!

The frames look milled from two pieces of flat barstock stacked atop each other, everything else turnings or milled bits and clean albeit plain construction. It's quite attractively done.

User avatar
Rufus T. Firefly
Posts: 42229
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Diesel Projects

Postby Rufus T. Firefly » Sat Jul 26, 2025 2:12 pm

sarge wrote:From the looks of it, I would more believe someone who knew what they were about just built that one for himself; not everything in this scale needs a commercial origin. GRIN!

The frames look milled from two pieces of flat barstock stacked atop each other, everything else turnings or milled bits and clean albeit plain construction. It's quite attractively done.


All true although I think that the actual cab unit might really be King in origins - the rest is much more what you state - milled barstock and well done stuff by someone who knew what they about.

I might have to open it up and take a look-see eventually.....or not as long as it continues to run. Odds are I'd just mess something up with stack of gears - sand not oil in the machinery of things that I tend to be, :mrgreen:

Whatever, it's a cute little bit that were there more about I think would do well.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
Rufus T. Firefly
Posts: 42229
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Diesel Projects

Postby Rufus T. Firefly » Tue Jul 29, 2025 8:32 am

One of these; runs like a Waring blender crawled up the drain line, :? Sorely tempted to strip it and re-paint it for a modern CVRR.....but that's so far down the list of things to do that I'll no doubt never get to it.

Image

Image
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

up148
Posts: 4796
Joined: Sat Nov 01, 2008 11:52 am

Re: Diesel Projects

Postby up148 » Tue Jul 29, 2025 8:51 am

I always liked that paint scheme and it looks factory......is it? Whose import is it?

The OMI 1st generation turbines sounded like that. If you didn't run them at full speed they could stall at any time and sounded like something was loose under that shell. :shock:

User avatar
Rufus T. Firefly
Posts: 42229
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Diesel Projects

Postby Rufus T. Firefly » Tue Jul 29, 2025 8:58 am

up148 wrote:I always liked that paint scheme and it looks factory......is it? Whose import is it?


Locomotive Workshop pile of aluminum castings for a 65T loco... :lol: I had castings for 2 more, but decided I have enough pain in my life already.
Last edited by Rufus T. Firefly on Wed Jul 30, 2025 4:20 pm, edited 1 time in total.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
De Bruin
Posts: 992
Joined: Thu Jan 12, 2017 8:24 pm

Re: Diesel Projects

Postby De Bruin » Tue Jul 29, 2025 1:03 pm

Nice paint indeed! I have one of these awaiting re-paint and couplers. It has the "factory" drive O ring drive too so yeah, noisy as a worn out Dremel-tool with all the vibration noise.
I need to get some Kadees on this too. The dummy knuckle is totally impractical for anything other than a tractor. Can I talk you into shooting the underside? Love to see how that was done on yours as it's pretty crowded under these due to the short length.
Image
Political Consultant- Tap into the hidden powers of your public office, insure your future is jail free, well funded. Visit shock and awe upon your adversaries, dominate the media, thrill your followers. contact morbo@happydaysrhereagain.com

User avatar
Rufus T. Firefly
Posts: 42229
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Diesel Projects

Postby Rufus T. Firefly » Tue Jul 29, 2025 1:45 pm

De Bruin wrote:Nice paint indeed! I have one of these awaiting re-paint and couplers. It has the "factory" drive O ring drive too so yeah, noisy as a worn out Dremel-tool with all the vibration noise.


The sideframes on yours seem more what I'd put under one of my freight motor trolleys!

I need to get some Kadees on this too. The dummy knuckle is totally impractical for anything other than a tractor. Can I talk you into shooting the underside? Love to see how that was done on yours as it's pretty crowded under these due to the short length.


Mine came with what I expect will be assessed as overly complicated, :lol: Give me a day or 3 to locate it, and get a photo for you.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
Rufus T. Firefly
Posts: 42229
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Diesel Projects

Postby Rufus T. Firefly » Fri Aug 01, 2025 2:02 pm

And here is that drive under the LWS 65T

Image
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
sarge
Posts: 5138
Joined: Thu Apr 02, 2009 2:21 pm
Location: Dungfield Manor

Re: Diesel Projects

Postby sarge » Sat Aug 02, 2025 8:00 am

Pretty elegant job, in keeping with the quality of the CNW paintwork.

User avatar
Rufus T. Firefly
Posts: 42229
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Diesel Projects

Postby Rufus T. Firefly » Sun Aug 03, 2025 2:04 pm

sarge wrote:Pretty elegant job, in keeping with the quality of the CNW paintwork.


Maybe overly elegant? Runs and sounds like a blender working on a handful of 6-32 nuts.....probably just needs "adjustment" :lol:
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
sarge
Posts: 5138
Joined: Thu Apr 02, 2009 2:21 pm
Location: Dungfield Manor

Re: Diesel Projects

Postby sarge » Sun Aug 03, 2025 4:39 pm

Might need the propshaft splined with telescoping tubing so the length can change when the truck is turned.

Simplicity might say change the shaft and u-joints out for automotive fuel line. I'd try this first, then go to splining the shaft if the tubing doesn't make the noise tolerable...

User avatar
Rufus T. Firefly
Posts: 42229
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Diesel Projects

Postby Rufus T. Firefly » Mon Aug 04, 2025 7:42 am

sarge wrote:Might need the propshaft splined with telescoping tubing so the length can change when the truck is turned.

Simplicity might say change the shaft and u-joints out for automotive fuel line. I'd try this first, then go to splining the shaft if the tubing doesn't make the noise tolerable...


As I noted probably overly complicated and perhaps better off being simplified. Have to find some tubing about the shop, and some open space to pull this apart nicely.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
De Bruin
Posts: 992
Joined: Thu Jan 12, 2017 8:24 pm

Re: Diesel Projects

Postby De Bruin » Mon Aug 04, 2025 9:00 pm

sarge wrote:Pretty elegant job, in keeping with the quality of the CNW paintwork.

I second that, I'd love your version over this "factory" O ring version on mine and trust me mine is likely nosier than yours too.
Image
Axle to axle chain drives always seen noisy to me but maybe I've just had badly set-up ones.
Thanks for posting that Rufous, it appears I'm going to have be disassembling mine at some point, if for nothing else than getting some operating Kadees on it.
Political Consultant- Tap into the hidden powers of your public office, insure your future is jail free, well funded. Visit shock and awe upon your adversaries, dominate the media, thrill your followers. contact morbo@happydaysrhereagain.com

User avatar
Rufus T. Firefly
Posts: 42229
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Diesel Projects

Postby Rufus T. Firefly » Tue Aug 05, 2025 8:36 am

De Bruin wrote:Axle to axle chain drives always seen noisy to me but maybe I've just had badly set-up ones.


The axle to axle spring drives seem fine for light work like the trolleys I build and the Q-Car and Wagner drives, etc. Not thought they'd have enough transfer before slipping under heavy diesels pulling a number of cars.

Thanks for posting that Rufous, it appears I'm going to have be disassembling mine at some point, if for nothing else than getting some operating Kadees on it.


Not a problem; just had to find space on the bench for a photo. And now I think I'll be disassembling mine after I find a bit of tubing, :wink: :wink:
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 38 guests