Scale Craft Mountain

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Scale Craft Mountain

Postby bob turner » Mon Aug 21, 2023 11:47 am

This is all subjective, just like headlights. Yes, for me it is visually worse on Lionel - especially the Hudson and 701 switcher. First thing I did to those two was scale flanges on all drivers.

I have not seen blind driers on Proto-48. I suspect they would be lots less objectionable to my.eye.

steamaheadstephen59
Posts: 238
Joined: Wed Sep 01, 2021 7:23 pm

Re: Scale Craft Mountain

Postby steamaheadstephen59 » Mon Aug 21, 2023 9:39 pm

Its true the larger the flanges the more the blind drivers stick out. They don't show much on the real thing. I feel lately I don't have time to be overly critical on a model, so Im letting some things go!

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Scale Craft Mountain

Postby bob turner » Sat Nov 25, 2023 1:16 pm

Don’t hesitate! Trainz has a slightly damaged Scale Craft Mountain with incorrect tender trucks for the low, low price of $1500 on eBay right now. It does appear to have flanges on all drivers.

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Scale Craft Mountain

Postby E7 » Sat Nov 25, 2023 9:52 pm

bob turner wrote:Don’t hesitate! Trainz has a slightly damaged Scale Craft Mountain with incorrect tender trucks for the low, low price of $1500 on eBay right now. It does appear to have flanges on all drivers.


My finger is twitching....................Naaaaaaaaaaaaah! :lol: :lol: :lol: :lol: :lol: :lol:

Just thinking that it wasn't all that long ago you could have bought a Sunset/3rd rail PRR M1a new for a grand.

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Scale Craft Mountain

Postby E7 » Sun Nov 26, 2023 1:11 am

steamaheadstephen59 wrote:Its true the larger the flanges the more the blind drivers stick out. They don't show much on the real thing. I feel lately I don't have time to be overly critical on a model, so Im letting some things go!


It's YOUR stuff, and all of it is subjective, so if YOU like it, that's really all that matters. Don't take too much stock in what is really just opinion! Sometimes what is less aesthetically pleasing is superior function wise, a point being the pilot truck on Pacifics. I have always preferred the look of a single axle up front, but dual axles track better (so THEY say). What do THEY know! :shock: :lol: :lol: :lol: :lol: :lol: Just kidding.

Rich

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Scale Craft Mountain

Postby E7 » Mon Nov 27, 2023 12:08 am

bob turner wrote:I have not seen blind driers on Proto-48. I suspect they would be lots less objectionable to my.eye.


Find someone who does PRR in P48 and has a correct Decapod. The early version had the 2,3,4 drivers blind, later to be changed to only the number 3 blind.

As I recall, the US Hobbies had 3 blind, and the Sunset 1.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Scale Craft Mountain

Postby bob turner » Mon Apr 14, 2025 9:23 pm

I was looking for my ATSF "convertible" thread - I think I posted photos of the Scale Craft Mikado, then my 2-10-2, my 4-8-2, and finally a really inaccurate 4-6-2 with Box Pok drivers (this last one has become a Katy Pacific, since both Katy and T&P had Box Pok Pacifics.

But I found this from a year and a half ago - so you do not get to see all the variants again.

Maroon sent me another S/C boiler a couple months ago, and so I set out to make a more or less permanent ATSF Mountain. It will get its own tender, pretty much to match the builder's photo of #3700. Not sure if I will paint the rods yellow, but otherwise I am copying the photo found in p.295 of the Worley book. I note that photos of Santa Fe power indicate that several boiler tapers were used both on 2-10-2s and 4-8-2s - and since the Scale Craft casting has at best a minimal taper, I choose my prototypes carefully.

Herewith:

Image

Image

Oh - PS- once a few more responses come in to Dave's "Shark" thread I will repost my doorstop Shark. I am sure Jim will add - he has some Sharks!

sleepmac
Posts: 658
Joined: Sun Nov 22, 2015 4:10 pm

Re: Scale Craft Mountain

Postby sleepmac » Tue Apr 15, 2025 6:50 am

Bob, finelooking machine!

Dan Weinhold

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: Scale Craft Mountain

Postby ScaleCraft » Tue Apr 15, 2025 2:55 pm

Garberson 1/4Q tender?
Dave....gone by invitation

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Scale Craft Mountain

Postby bob turner » Tue Apr 15, 2025 3:48 pm

No - Lobaugh Berk tender with the top straightened, and the body widened. It goes behind my Katy Pacific. I will be building a proper ATSF tender - it is larger than this, but small relative to the huge 4-8-4 tenders I am using behind the Mike and 2-10-2. Here is a repeat photo:

Image

Note that this is a different boiler - it used to go back and forth between the 2-10-2 and the 4-8-2, but now, thanks to Maroon, I have two extended boilers. Note the relative lack of details and running boards on the new boiler.

That is a scratchbuilt tender on MG trucks. I also have an identical MG tender behind the Mike, and an extra ATSF Mike tender with Pullman trucks. I always have spare tenders!

I had Burlington decals left over from the Seacrest days. Callie Graphics will make Katy "stick-ons."

steamaheadstephen59
Posts: 238
Joined: Wed Sep 01, 2021 7:23 pm

Re: Scale Craft Mountain

Postby steamaheadstephen59 » Tue Apr 15, 2025 7:57 pm

I love what you have don with the scale craft mick boilers they both look great to me. Bob didn’t you do a build artical in 1/48 on building the SP tender for the mountain?


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 35 guests