This is interesting on EB

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: This is interesting on EB

Postby ScaleCraft » Fri Aug 05, 2022 2:54 pm

bob turner wrote:
Can one tin plate zamac? I would have guessed nickel, which was an easy option in the olden days. Not sure it is even possible now, although I might try the Eastman setup some day.



Let's try this again.
THAT NW is NOT zinc. It is NOT plated. Other than end beams, it's all tin cut with tin snips and poorly soldered together.
Not bad, but definitely not good.
Homemade frame.
Look at the photos. Enlarge and inspect.
Dave....gone by invitation

HONDO74
Posts: 9140
Joined: Fri Mar 03, 2006 1:55 pm
Location: Midway USA

Re: This is interesting on EB

Postby HONDO74 » Fri Aug 05, 2022 3:10 pm

bob turner wrote:Nothing going on in the hobby, so I am cruising - I note that an OGR poster just bought a nice 700E for two grand - he is very happy, although something is warped badly enough that the pilot drags. Then I note a 1990s version going for under $300 so far. I have always had a soft spot for the Lionel Hudson, and still have a 2-rail 763.

Then to eBay, where a nice AN NW-2 is offered for under $12,000. It might have been plated, but hard to tell - I suppose the zamac can be polished to a high reflectivity. Price cannot be an anomaly, since it has a comma, and two zeros after the big numbers - but maybe eBay adds those. Still . . .

Nothing else going on here - off to the airport.


Here is the link to the 700e on OGR
https://ogrforum.ogaugerr.com/topic/jus ... ale-hudson

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: This is interesting on EB

Postby ScaleCraft » Fri Aug 05, 2022 4:10 pm

Plus...I am not certain when horizontal drives came to be in GM, but for sure early stuff was vertical.

Jimmy will jump in I am sure. GM bought the tooling for this from Adams? CLW?
So zero need to scab up a tin mess.
Heck, the top of the hood is nowhere close to correct.

Somebody who claims "prototype" is in serious need of a thought pattern adjustment.

I've been looking at his other "gems". Most are listed as "rare" or "vintage".
This struck me as hilarious:
https://www.ebay.com/itm/LIONEL-VERY-SC ... 5224214849
Now, flaking paint, some odd primer I can find zero reference for, and he wants $1300.00.
Point of reference, here is one, WITH original box and NO flaking paint for $50.00:
https://www.ebay.com/itm/225007158344
Dave....gone by invitation

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: This is interesting on EB

Postby ScaleCraft » Fri Aug 05, 2022 7:42 pm

Bob:
Look at this. Tell me GMC had NW horizontal drives "in the mid 40's", plus white nylon driveshafts and horny balls:
https://i.ebayimg.com/images/g/otAAAOSw ... -l1600.jpg

The extreme quality and care of the TIN soldering:
https://i.ebayimg.com/images/g/hP0AAOSw ... -l1600.jpg

More neat stuff:
https://i.ebayimg.com/images/g/HZQAAOSw ... -l1600.jpg

Front sheet, behind steps, whacked with tin snips. Notice the solder globs on the steps where they USED to connect to a tin end beam:
https://i.ebayimg.com/images/g/rx8AAOSw ... -l1600.jpg

Neat stealth steps up to cab shown here:
https://i.ebayimg.com/images/g/~A8AAOSw ... -l1600.jpg

One more, a comparison. Q NW2, look at hood height, visibility out cab windows over hood:
https://www.american-rails.com/images/8 ... 690397.jpg
Now look at the kluge in question:
https://i.ebayimg.com/images/g/K7sAAOSw ... -l1600.jpg

Just so many things wrong. From drives that didn't exist then, to tin fabrication, lack of adherence to actual prototype.
Dave....gone by invitation

User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

Re: This is interesting on EB

Postby R.K. Maroon » Fri Aug 05, 2022 11:15 pm

Here are a couple of shots from the eBay ad for the $12k NW2:

Image

Image

Unless there is documentation, which is not presented by the seller, there is no way to verify that this is a prototype for the General Models NW2 or anything else. The presence of the second generation drive train does not help the argument, nor does the poor proportions (that hood is a mess). The Adams/CLW model predated the GMC version by a good year, and there is an old story that Lindsey Adams sold the CLW patterns to GMC (see OST Issue #108, Apr-May 2020 for details). Whether the CLW/Adams/GMC story is true or not, the CLW/Adams model was certainly known to GMC. It is a stretch to think that the model on eBay is related to the GMC model in any way.

Is the seller simply wishcasting here as to the origin and value of this, or does he know better and is simply fishing for a fool and his money?

Jim
The link below any photo will display the image full size

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: This is interesting on EB

Postby ScaleCraft » Sat Aug 06, 2022 3:18 pm

I talked to Jimmy earlier. I think that's a kit. Who is the question.
Look at the doors on the side of the hood.
They're stamped. Latches and hinges, no solder overrun, all in exactly the same place on each door.
Can't tell for sure, but side windows might be stamped for relief.
Dave....gone by invitation

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: This is interesting on EB

Postby E7 » Sat Aug 06, 2022 4:30 pm

ScaleCraft wrote:The extreme quality and care of the TIN soldering:
https://i.ebayimg.com/images/g/hP0AAOSw ... -l1600.jpg


How many 5ths of Tequila are necessary for one to achieve that level of expertise?

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: This is interesting on EB

Postby ScaleCraft » Sat Aug 06, 2022 5:42 pm

E7 wrote:
ScaleCraft wrote:The extreme quality and care of the TIN soldering:
https://i.ebayimg.com/images/g/hP0AAOSw ... -l1600.jpg


How many 5ths of Tequila are necessary for one to achieve that level of expertise?

depends on how much Bourbon you had just before the Tequila.....
Dave....gone by invitation

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: This is interesting on EB

Postby E7 » Sat Aug 06, 2022 7:58 pm

[quote="R.K. Maroon"]Here are a couple of shots from the eBay ad for the $12k NW2:

Image

For that 12K figure to be even REMOTELY realistic, that metal it's made of better be AU on the periodic table.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: This is interesting on EB

Postby bob turner » Sat Aug 06, 2022 9:30 pm

Well, it is quite shiny.

I just found a Lobaugh Berk lead truck, complete with wheel set, for only $29 and $10 shipping. I am not going to post a link - saving it all for myself.

up148
Posts: 4796
Joined: Sat Nov 01, 2008 11:52 am

Re: This is interesting on EB

Postby up148 » Fri Aug 12, 2022 9:06 am

I believe these are LW kits and way over priced IMHO, except for maybe history buffs. I've never seen a built up model, but back in the 90's I saw a kit for sale at MM and saw some advertisements for it some 80's OSN. I was told it is a kit that requires a very experienced and talented builder. These look to be built pretty well.

https://www.ebay.com/itm/185533442788?h ... SwE85i890v

https://www.ebay.com/itm/175379486744?h ... Swn01i88em

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: This is interesting on EB

Postby bob turner » Fri Aug 12, 2022 1:18 pm

I think I shall differ with my friend Butch. They appear straight, well-detailed, well-soldered, and even well-powered, with no Britannia metal or pewter in sight. They do not look like any LocoWorks efforts I am familiar with, but could well be products from the Avon Lake period of LWS production.
I consider them impressive, from the photos, and maybe underpriced. Be interesting to know whether 1/4" scale or 17/64. There have been folks in the modern era capable of this kind of work from scratch.

Glad to see Carey back - does this mean that our other friends might be able to join us?

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: This is interesting on EB

Postby ScaleCraft » Fri Aug 12, 2022 1:26 pm

up148 wrote:I believe these are LW kits and way over priced IMHO, except for maybe history buffs. I've never seen a built up model, but back in the 90's I saw a kit for sale at MM and saw some advertisements for it some 80's OSN. I was told it is a kit that requires a very experienced and talented builder. These look to be built pretty well.

https://www.ebay.com/itm/185533442788?h ... SwE85i890v

https://www.ebay.com/itm/175379486744?h ... Swn01i88em

"SCALE BRASS / SLC UTAH"
LWS?
Dave....gone by invitation

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: This is interesting on EB

Postby ScaleCraft » Sat Aug 13, 2022 2:09 am

https://www.ebay.com/itm/295081651451
Trainz.

There are a couple of 2-rail things here. One, somebody pulled the roller plate out of the engine. Two, somebody stuck (not secured) 2-rail fright trucks under the tender. At least they left the "203" on the cab.
Sure looks like a Lionel pre-war B6 to me. Lotta work to bring it back. Not worth the effort for the asking. Opinion.
Dave....gone by invitation

up148
Posts: 4796
Joined: Sat Nov 01, 2008 11:52 am

Re: This is interesting on EB

Postby up148 » Sat Aug 13, 2022 10:33 am

bob turner wrote:I think I shall differ with my friend Butch. They appear straight, well-detailed, well-soldered, and even well-powered, with no Britannia metal or pewter in sight. They do not look like any LocoWorks efforts I am familiar with, but could well be products from the Avon Lake period of LWS production.
I consider them impressive, from the photos, and maybe underpriced. Be interesting to know whether 1/4" scale or 17/64. There have been folks in the modern era capable of this kind of work from scratch.

Glad to see Carey back - does this mean that our other friends might be able to join us?



Certainly okay to differ Bob. The only turbines I was aware of in O scale, besides OMI, were the LWS kits. So, I learned something which is always good. I didn't mean to infer they weren't built very well and I have no idea of real value. I'm just not a doorstop guy and these models aren't far removed from doorstop for me. :D


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 62 guests