All Nation NW-2
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: All Nation NW-2
You guys have no idea. Well, maybe you do.
When you get some moron that decides A) he doesn't like you and B) he wants to attack.....and you were posting in an e-mail list.....and he modifies one of your posts, sends it to a fairly major US firm fronting for a major PRC manufacturer of trains.....tell me how bad it can be when suddenly you gotta face down some PRC lawyers gonna sue yer ***.
THAT'S an attack.
Or some clown who claims to work for the DEA now that he's retired special forces (probably didn't help when we told him in the Air Force "special forces" ran the enlisted men's clubs (not...but good dig) and in print he threatens you AND your wife with a visit from his buddies in the DEA and cavity searches.
THAT'S an attack.
Helps if you know folks IN the gummint....who knows who to contact. Fun.
When you get some moron that decides A) he doesn't like you and B) he wants to attack.....and you were posting in an e-mail list.....and he modifies one of your posts, sends it to a fairly major US firm fronting for a major PRC manufacturer of trains.....tell me how bad it can be when suddenly you gotta face down some PRC lawyers gonna sue yer ***.
THAT'S an attack.
Or some clown who claims to work for the DEA now that he's retired special forces (probably didn't help when we told him in the Air Force "special forces" ran the enlisted men's clubs (not...but good dig) and in print he threatens you AND your wife with a visit from his buddies in the DEA and cavity searches.
THAT'S an attack.
Helps if you know folks IN the gummint....who knows who to contact. Fun.
Dave....gone by invitation
Re: All Nation NW-2
We learned the rhyme as children and I guess we've forgotten "Sticks and stones will break my bones, but words will never hurt me". Totally confused by this conclusion. 
Re: All Nation NW-2
up148 wrote:We learned the rhyme as children and I guess we've forgotten "Sticks and stones will break my bones, but words will never hurt me". Totally confused by this conclusion.
I had this exact conversation with someone yesterday. I swear people are just waiting to be offended today
I spend entirely too many hours a day tying my shoes
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: All Nation NW-2
I disagree. On a forum like this, disagreeing with someone else's opinion is ok, but attacking them personally for their diverging opinion is out of place. There is simply never any need for personal attacks, and I can see how folks get offended.
That old saying was for kids who get bullied to use as a retort - but words can hurt!
Opinion.
That old saying was for kids who get bullied to use as a retort - but words can hurt!
Opinion.
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: All Nation NW-2
bob turner wrote:I disagree. On a forum like this, disagreeing with someone else's opinion is ok, but attacking them personally for their diverging opinion is out of place. There is simply never any need for personal attacks, and I can see how folks get offended.
That old saying was for kids who get bullied to use as a retort - but words can hurt!
Opinion.
This really is getting towards the end result of what the academia has been striving for.
If you take your blinders off, you will see that "free speech" only is an available option to you IF your "free speech" agrees with the listener.
Honestly...think hard....how many videos/film/news stories have you seen where the woke personas scream down the ones they don't want to hear?
How many college students rally and protest, scream and holler, because their professors told them the speaker scheduled to visit didn't think as they do?
Really doesn't take much for folks to get their heads out of the sand (or their ***) and look around.
In this liberal, woke generation, you call someone a racist if you don't have anything else to bring to the argument.
How do you respond to that?
You can't. Like, what was it, Clarence Darrow (or maybe someone else) asked "have you quit beating your wife yet?"
People throw out shit at others on the internet.....and on twatter, and faceplant, and whatever else....that you would NEVER say face to face...or you wouldn't have a face..
There is no more decency. Or politeness.
Dave....gone by invitation
Re: All Nation NW-2
bob turner wrote: but attacking them personally
Definition of personal attack.. Making of an abusive remark on or relating to one's person instead of providing evidence when examining another person's claims or comments.
Can we get back to talking about ALL NATION NW-2. I have some questions.
While my main interest in trains has always been prewar tinplate. I ran across one of the diecast NW-2 a few years back at a shop near where I live. I thought about buying it but waited too long and it was gone when I decided to buy it. i could kick myself for not buying it. I thought it was 3 rail but I can't remember for sure. The price was $100. sounded reasonable at the time.
If I ran across another one I would buy it but I don't know much about them so I"M looking for more info about them in 3 rail.
My rational for including it with my prewar is because it is diecast and the real NW-2s were made prewar. The same rational I use for including a Lionel GG1.
Okay now you can abuse me all you want because I"M ignorant on this subject.
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: All Nation NW-2
I can talk two and three rail NW2's.
You could buy 2-rail versions. They could (early) have nose drive, vertical motor. You could have AC motor with selenium rectumfrier for use on DC (as shown in that Trainz listing). On that same listing, you could have horizontal motor with single truck drive.
Good ones opted for two truck drive.
Now it gets fun. If you look closely you will see the pilot ends are different between 2 and 3 rail.
LONG horizontal slot on 3-rail, took the solid cast Thomas coupler in a radial arrangement. 2-rail standard coupler pocket.
We figure the wheel differences.
Three rail had a specially bent bracket to hold the Thomas sliders for center rail pickup. Lionel rollers can easily be inserted.
Sliders were horrible.
They also came with a Thomas (?) horizontal e-unit, not worth messing with. Horizontal is non-gravity reset, so internal spring. Start applying power, picking up speed, POW! you get enough to override the spring and you're in neutral.
Now try applying power......finally overcomes the spring, and POW! you're running zero to 52 SMPH in less than 1/2 second.
The lockout of these old e-units is one of the stacks...rear, I think. Rotate it.
Dallee or QSI electronic reverser.
Third rail pickup pretty much eliminates 4 axle drive.
I have three rail units with vertical motors, and with horizontal motors driving one truck.
I have 2-rail with 4 axle drive, and a 600hp with single, vertical armature drive.
Had a three rail come through that some moron had removed the pilot end plates, scabbed up Lionel electromagnetic couplers hanging out three inches.
So, couplers and coupler slots.
Flanges on wheels.
2 and 3 rail.
Horizontal and Vertical armatures.
AC and DC motors.
2 axle and 4 axle drives.
Even NW2 and 600hp configuration.
I won't say I have them all.....but I have enough to see the variations
You could buy 2-rail versions. They could (early) have nose drive, vertical motor. You could have AC motor with selenium rectumfrier for use on DC (as shown in that Trainz listing). On that same listing, you could have horizontal motor with single truck drive.
Good ones opted for two truck drive.
Now it gets fun. If you look closely you will see the pilot ends are different between 2 and 3 rail.
LONG horizontal slot on 3-rail, took the solid cast Thomas coupler in a radial arrangement. 2-rail standard coupler pocket.
We figure the wheel differences.
Three rail had a specially bent bracket to hold the Thomas sliders for center rail pickup. Lionel rollers can easily be inserted.
Sliders were horrible.
They also came with a Thomas (?) horizontal e-unit, not worth messing with. Horizontal is non-gravity reset, so internal spring. Start applying power, picking up speed, POW! you get enough to override the spring and you're in neutral.
Now try applying power......finally overcomes the spring, and POW! you're running zero to 52 SMPH in less than 1/2 second.
The lockout of these old e-units is one of the stacks...rear, I think. Rotate it.
Dallee or QSI electronic reverser.
Third rail pickup pretty much eliminates 4 axle drive.
I have three rail units with vertical motors, and with horizontal motors driving one truck.
I have 2-rail with 4 axle drive, and a 600hp with single, vertical armature drive.
Had a three rail come through that some moron had removed the pilot end plates, scabbed up Lionel electromagnetic couplers hanging out three inches.
So, couplers and coupler slots.
Flanges on wheels.
2 and 3 rail.
Horizontal and Vertical armatures.
AC and DC motors.
2 axle and 4 axle drives.
Even NW2 and 600hp configuration.
I won't say I have them all.....but I have enough to see the variations
Dave....gone by invitation
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: All Nation NW-2
Make it easy. Turn it upside down; look for four bronze axle gears and the motor mounted horizontally in the middle. Look for scale couplers in reasonable slots. Then cough up $100-$200 and go home and clean/lubricate.
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: All Nation NW-2
I have been avoiding even looking at the "why can't we grow O Scale?" Threads, but for some reason a lot of NW-2 chatter is taking place there.
OGR is on track for 400 responses. I have not checked to see if new and valuable info has appeared.
OGR is on track for 400 responses. I have not checked to see if new and valuable info has appeared.
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: All Nation NW-2
bob turner wrote:Make it easy. Turn it upside down; look for four bronze axle gears and the motor mounted horizontally in the middle. Look for scale couplers in reasonable slots. Then cough up $100-$200 and go home and clean/lubricate.
Then you get into that Trainz unit. Two axle gears, selenium rectumfrier. You don't want that. New motor, another power block...uh, no.
Dave....gone by invitation
-
Chris Webster
- Posts: 956
- Joined: Mon May 25, 2015 8:25 pm
Re: All Nation NW-2
There is also a General Models NW2 available in Buford: General Motors 4001 O Scale Die-Cast Diesel Locomotive [2Rail]
The builder spent a lot of effort on detailing it, probably to match a west coast logging prototype. It's a shame they never finished painting and decaling it.
The builder spent a lot of effort on detailing it, probably to match a west coast logging prototype. It's a shame they never finished painting and decaling it.
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: All Nation NW-2
Nice. Straight cut gears. That'll settle ballast!
However, i have NEVER seen any A-N trucks with covers over the axle gears. No idea why.
got enough MU hoses on it.....
However, i have NEVER seen any A-N trucks with covers over the axle gears. No idea why.
got enough MU hoses on it.....
Dave....gone by invitation
Re: All Nation NW-2
YUP, CLW with those fitted brass shroud-covers over the gears.
Political Consultant- Tap into the hidden powers of your public office, insure your future is jail free, well funded. Visit shock and awe upon your adversaries, dominate the media, thrill your followers. contact morbo@happydaysrhereagain.com
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: All Nation NW-2
De Bruin wrote:YUP, CLW with those fitted brass shroud-covers over the gears.
Sure don't look like CLW's to me
Dave....gone by invitation
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: All Nation NW-2
Very early A-N were brass sides with shim stock covers. Later production was steel, blackened, no covers. Last production was poorly assembled.
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 49 guests
