The Tridaily Doorstop -- Bob's Mexicano Electric
Re: The Tridaily Doorstop #19 -- Walthers 3571 Steel Gondola
Just as today, the decals could be anyone's; Walthers, Champion, whoever made decalcomania for the other kit manufacturers, leavings, clippings, &c. The mindset then as now was for non-integrated product ranges, unlike the toy-train mindset where brand loyalty was encouraged by comprehensive product ranges; everything you need from wire to engines under one label. Our scale world is and has always featured the free mingling bits from one range with another, companies solely making trucks or decals or gears, the establishment of standards across the industry. Then as now it was mix and match by intent and also by hobbiests' whim. That's what makes your field so very very difficult, ferreting out and documenting unfettered examples from a period, built and kept "stock", much harder than writing a Lionel postwar production book.
The decals here are not used to intent of the set, whatever the origin, for only a roadname, reporting mark, and four digits (which for MC I would suspect is too few; an ORER would tell you) are present. No dimensional or weight data were used.
BTW, ORERs and Cyclopedias should be in your library alongside catalogues as research tools, for the manufacturers of the era used them for research themselves to get drawings and roster information during their design. Its easy to look at a model and, in this case, determine the decals as most likely a modeller's cobble simply by the lack of conformance to AAR convention in their layout and a number series check, that done alongside the catalogue listings support many guesses to become at least solid interpretations. Very often, you'll even find the specific prototype of a kit drawn and photographed in the contemporary Cyclopedia, and a series was done of "The Model Railroad Cyclopedia" which captured many of those drawings directly from Simmons Boardman and republished them under one cover for modellers' use.
The decals here are not used to intent of the set, whatever the origin, for only a roadname, reporting mark, and four digits (which for MC I would suspect is too few; an ORER would tell you) are present. No dimensional or weight data were used.
BTW, ORERs and Cyclopedias should be in your library alongside catalogues as research tools, for the manufacturers of the era used them for research themselves to get drawings and roster information during their design. Its easy to look at a model and, in this case, determine the decals as most likely a modeller's cobble simply by the lack of conformance to AAR convention in their layout and a number series check, that done alongside the catalogue listings support many guesses to become at least solid interpretations. Very often, you'll even find the specific prototype of a kit drawn and photographed in the contemporary Cyclopedia, and a series was done of "The Model Railroad Cyclopedia" which captured many of those drawings directly from Simmons Boardman and republished them under one cover for modellers' use.
Last edited by sarge on Sat Apr 16, 2022 6:58 am, edited 1 time in total.
Re: The Tridaily Doorstop #19 -- Walthers 3571 Steel Gondola
On a related note, I saw the switcher article in OST and enjoyed the mention of the modellers' versions of the AN SW1. I thought you might like to see how our NYC one looks today.

You were absolutely spot-on in your comments about its construction and about the original GM drives. This model is no shelf queen; it operates alongside its younger brass and plastic brethren needing no apology.

You were absolutely spot-on in your comments about its construction and about the original GM drives. This model is no shelf queen; it operates alongside its younger brass and plastic brethren needing no apology.
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: The Tridaily Doorstop #19 -- Walthers 3571 Steel Gondola
Time for Jim to show up - we are now over sextadaily. Hope that word passes the censors.
- R.K. Maroon
- Posts: 3141
- Joined: Tue Feb 22, 2011 9:20 pm
Re: The Tridaily Doorstop #20 -- Alexander 70-ton 3-Bay Hopper
#20 -- Alexander 70-ton 3-Bay Hopper
Alexander made a couple of different 70-ton hoppers. Here is the three-bay:


I have several of these. They are sand-cast aluminum. As a group they have a better casting finish than many other cast AL cars. They have no rivets though, which given how difficult it seems to have been to get decent rivets on cast aluminum at the time, was probably the correct choice.
Jim
Alexander made a couple of different 70-ton hoppers. Here is the three-bay:


I have several of these. They are sand-cast aluminum. As a group they have a better casting finish than many other cast AL cars. They have no rivets though, which given how difficult it seems to have been to get decent rivets on cast aluminum at the time, was probably the correct choice.
Jim
The link below any photo will display the image full size
- Rufus T. Firefly
- Posts: 42233
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: The Tridaily Doorstop #20 -- Alexander 70-ton 3-Bay Hopper
.
Last edited by Rufus T. Firefly on Tue Apr 26, 2022 5:15 pm, edited 1 time in total.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: The Tridaily Doorstop #20 -- Alexander 70-ton 3-Bay Hopper
I KNOW you have a couple of pre-war Alexander hoppers with BN lettering.....and loads.....
Dave....gone by invitation
- Rufus T. Firefly
- Posts: 42233
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: The Tridaily Doorstop #20 -- Alexander 70-ton 3-Bay Hopper
.
Last edited by Rufus T. Firefly on Tue Apr 26, 2022 5:16 pm, edited 1 time in total.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: The Tridaily Doorstop #20 -- Alexander 70-ton 3-Bay Hopper
Rufus T. Firefly wrote:ScaleCraft wrote:I KNOW you have a couple of pre-war Alexander hoppers with BN lettering.....and loads.....
No.
Oh, yeah. I know where they came from last, but not who did the deed.
Sorta like BNSF lettered steam.
Or the PC decals for steam Walthers offered and caused a shitstorm in MR.
The possibility exists that these are those, stripped, unloaded, repainted and relettered.
Dave....gone by invitation
Re: The Tridaily Doorstop #20 -- Alexander 70-ton 3-Bay Hopper
Dave, are you saying there is something of a travesty to lettering a pre-war model for a railroad that existed in the 1970s, given that railroad had (in this case) 70 ton offset triples? Or is this case simply one of BN didn't have 70T offset triples?
If it's the former, I'm certainly guilty of similar offence, lettering things like Kemtron Geeps for 1990s regionals as an example.
Grin!
If it's the former, I'm certainly guilty of similar offence, lettering things like Kemtron Geeps for 1990s regionals as an example.
Grin!
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: The Tridaily Doorstop #20 -- Alexander 70-ton 3-Bay Hopper
sarge wrote:Dave, are you saying there is something of a travesty to lettering a pre-war model for a railroad that existed in the 1970s, given that railroad had (in this case) 70 ton offset triples? Or is this case simply one of BN didn't have 70T offset triples?
If it's the former, I'm certainly guilty of similar offence, lettering things like Kemtron Geeps for 1990s regionals as an example.
Grin!
Not quite. Sorta like taking a pristine Model "A" Ford and putting a modern paint job on it, metal flake, ghost flames, racing stripes and graphics.....and stock 19 or 21" wheels (depending on year), mechanical brakes, stock 200 flathead four.
Historical doorstops need to be done more period correct. To be presented properly. Turner. (errrr....opinion)
Kemtron Geeps....when was the first one? 54? GP7 was 49? Certainly not prewar, and prototypically, they're STILL repainting those.
Mine is NP Canoe.
Dave....gone by invitation
- Rufus T. Firefly
- Posts: 42233
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: The Tridaily Doorstop #20 -- Alexander 70-ton 3-Bay Hopper
.
Last edited by Rufus T. Firefly on Tue Apr 26, 2022 5:16 pm, edited 1 time in total.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: The Tridaily Doorstop #20 -- Alexander 70-ton 3-Bay Hopper
Rufus T. Firefly wrote:ScaleCraft wrote:Rufus T. Firefly wrote:
No.
Oh, yeah. I know where they came from last, but not who did the deed.
Right......
I got them years ago from Garberson. One never has any idea where he got them.
Can't recall...they had Kadees, I think the pin was yellow or red on all four. Somebodies idea of...something.
Dave....gone by invitation
Re: The Tridaily Doorstop #20 -- Alexander 70-ton 3-Bay Hopper
ScaleCraft wrote:sarge wrote:Dave, are you saying there is something of a travesty to lettering a pre-war model for a railroad that existed in the 1970s, given that railroad had (in this case) 70 ton offset triples? Or is this case simply one of BN didn't have 70T offset triples?
If it's the former, I'm certainly guilty of similar offence, lettering things like Kemtron Geeps for 1990s regionals as an example.
Grin!
Not quite. Sorta like taking a pristine Model "A" Ford and putting a modern paint job on it, metal flake, ghost flames, racing stripes and graphics.....and stock 19 or 21" wheels (depending on year), mechanical brakes, stock 200 flathead four.
Historical doorstops need to be done more period correct. To be presented properly. Turner. (errrr....opinion)
Kemtron Geeps....when was the first one? 54? GP7 was 49? Certainly not prewar, and prototypically, they're STILL repainting those.
Mine is NP Canoe.
Wasn't saying the Geep was prewar at all, just an older model I gleefully paint for a railroad that didn't exist yet when the model was made. Therefore, the same crime, really.
So, what makes a model no longer a model but some sort of icon of religious significance such that (in your turner er I mean opinion) one should only build, paint, and letter in period fashion? It's a serious question; what defines a relic to be restored or left alone versus an old model I might feel perfectly at ease with updating to near-current standard?
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: The Tridaily Doorstop #20 -- Alexander 70-ton 3-Bay Hopper
Easy.
Alexander stuff is somewhat historic.
Sort of like a Duesenberg.
It's your railroad......you can letter it for Trash Removal Service (TRSX).
Now, plastic Atlas........ho hum....paint it with a brush and use vinyl stick on lettering.
Even Lobaugh (see if that gets the Turner involved here.
I have a Lionel metal postwar tank, somebody put scale trucks and Kadees....looks nice...lettered "Warren"? Nice paint.
Not scale.
Put Lionel trucks back and just use it.
Alexander stuff is somewhat historic.
Sort of like a Duesenberg.
It's your railroad......you can letter it for Trash Removal Service (TRSX).
Now, plastic Atlas........ho hum....paint it with a brush and use vinyl stick on lettering.
Even Lobaugh (see if that gets the Turner involved here.
I have a Lionel metal postwar tank, somebody put scale trucks and Kadees....looks nice...lettered "Warren"? Nice paint.
Not scale.
Put Lionel trucks back and just use it.
Dave....gone by invitation
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: The Tridaily Doorstop #20 -- Alexander 70-ton 3-Bay Hopper
Or TRSLXXX. Letter for "Radio Shack" and you have a Trash-80.
Dave....gone by invitation
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 42 guests