The Tridaily Doorstop -- Bob's Mexicano Electric
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: The Tridaily Doorstop #16 -- Alexander New Haven EY-3 Boxcab Electric
That is an impressive price.
I note that the three truck "Mexicano" appears as a builder's photo on p. 136 of "Illustrated Treasury of the American Locomotive Company," OM Kerr, Norton, 1990.
Also I note that ALCO made a B-B-B for Butte, Anaconda, & Pacific, and 1-B-B-1 for Milwaukee and NH using what appear to be the same trucks.
I have three original sideframes and three ever so slightly undersize repros - I will block out a model similar to Mexicano, and in the unlikely event of my demise, the project will be Pete's.
I note that the three truck "Mexicano" appears as a builder's photo on p. 136 of "Illustrated Treasury of the American Locomotive Company," OM Kerr, Norton, 1990.
Also I note that ALCO made a B-B-B for Butte, Anaconda, & Pacific, and 1-B-B-1 for Milwaukee and NH using what appear to be the same trucks.
I have three original sideframes and three ever so slightly undersize repros - I will block out a model similar to Mexicano, and in the unlikely event of my demise, the project will be Pete's.
- R.K. Maroon
- Posts: 3141
- Joined: Tue Feb 22, 2011 9:20 pm
Re: The Tridaily Doorstop #17 -- Walthers Great Northern Express Reefer
#17 -- Walthers Great Northern Express Reefer
As I understand it, Great Northern had a large fleet of express reefers and, like PRR boxcars, could be found roaming over a large expanse of the U.S. rail network. I do not know if this had anything to do with it, but several O-scale manufacturers offered versions of this reefer. Here is an example of the Walthers version:


This model was in the Walthers catalog for decades. I have seen several pre-war examples of this model, but none with paint and decals is such good shape. It would thus be a reasonable bet that this is a post-war version. The note that came with the car indicates it is 17/64's. I have not measured it to check.
Jim
As I understand it, Great Northern had a large fleet of express reefers and, like PRR boxcars, could be found roaming over a large expanse of the U.S. rail network. I do not know if this had anything to do with it, but several O-scale manufacturers offered versions of this reefer. Here is an example of the Walthers version:


This model was in the Walthers catalog for decades. I have seen several pre-war examples of this model, but none with paint and decals is such good shape. It would thus be a reasonable bet that this is a post-war version. The note that came with the car indicates it is 17/64's. I have not measured it to check.
Jim
The link below any photo will display the image full size
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: The Tridaily Doorstop #17 -- Walthers Great Northern Express Reefer
I have not seen one anywhere near that nice.
Re: The Tridaily Doorstop #17 -- Walthers Great Northern Express Reefer
R.K. Maroon wrote:As I understand it, Great Northern had a large fleet of express reefers and, like PRR boxcars, could be found roaming over a large expanse of the U.S. rail network. I do not know if this had anything to do with it, but several O-scale manufacturers offered versions of this reefer. Here is an example of the Walthers version:
Express refrigerators and baggage cars in express and mail service of all roads were freely interchanged, so the GN ones are hardly unusual in that regard. I don't believe the GN car was unique, but the basic carbody was a stock catalogue design from the carbuilders of the era (General American comes to mind), a selection of which can be seen in a contemporary Carbuilders Cyc.
R.K. Maroon wrote:This model was in the Walthers catalog for decades. I have seen several pre-war examples of this model, but none with paint and decals is such good shape. It would thus be a reasonable bet that this is a post-war version.
Regarding the "reasonable bet this would be the postwar version" based solely on condition, I'll once again throw the damp towel over that presumption that the kit was bought, immediately built, and only built using only the components in the kit, thus an icon of its period. It's not a good indicator or assumption unless you have provenance that says its true.
Far more likely it was bought, stashed in the kit cupboard to season a bit, perhaps resold a time or two, perhaps built or started, perhaps not, and only finished decades after original purchase and quite probably with some bits not original to the kit. Those decals look suspiciously like Champ XR-13, gawd knows how many of those I've thrown on the Oriental brass version of the GN car. Even if they are Walthers decals, they just as easily could have been bought fresh in the seventies or early eighties (set 52-65; I still have my catalogues from when I custom painted).
Unless you have provenance that states otherwise, that car could much more easily have been finished in the eighties rather than the forties or fifties, for example. I've built more than one, bought cheap at the shows. In this scale, condition of a built kit is a notoriously unreliable benchmark to date the model.
- Rufus T. Firefly
- Posts: 42233
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: The Tridaily Doorstop #17 -- Walthers Great Northern Express Reefer
.
Last edited by Rufus T. Firefly on Tue Apr 26, 2022 5:14 pm, edited 1 time in total.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: The Tridaily Doorstop #17 -- Walthers Great Northern Express Reefer
Neat car James, looks great! Do you have a shot of one of the car ends? I have a similar Walthers in the donation pile, albeit it's in pretty rough shape as well as coated in the usual barn-dust/grime. Seeing this one makes me think about buying it and refurbishing.
Political Consultant- Tap into the hidden powers of your public office, insure your future is jail free, well funded. Visit shock and awe upon your adversaries, dominate the media, thrill your followers. contact morbo@happydaysrhereagain.com
- R.K. Maroon
- Posts: 3141
- Joined: Tue Feb 22, 2011 9:20 pm
Re: The Tridaily Doorstop #17 -- Walthers Great Northern Express Reefer
Pete, I don't have a shot of the ends but will take one next time I am at the shop (maybe tomorrow).
Here is the underside:

Note the Lobaugh trucks. Lobaugh express reefer trucks are often found on express reefers and milk cars from other manufacturers, but in this case the trucks are AC&F 4-wheel passenger trucks. They appear to be reasonable match to the trucks on the GN prototype (as best I can tell from a quick survey of photos on the internet).
Here is the underside:

Note the Lobaugh trucks. Lobaugh express reefer trucks are often found on express reefers and milk cars from other manufacturers, but in this case the trucks are AC&F 4-wheel passenger trucks. They appear to be reasonable match to the trucks on the GN prototype (as best I can tell from a quick survey of photos on the internet).
The link below any photo will display the image full size
- Rufus T. Firefly
- Posts: 42233
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: The Tridaily Doorstop #17 -- Walthers Great Northern Express Reefer
.
Last edited by Rufus T. Firefly on Tue Apr 26, 2022 5:14 pm, edited 1 time in total.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
-
Chris Webster
- Posts: 957
- Joined: Mon May 25, 2015 8:25 pm
Re: The Tridaily Doorstop #17 -- Walthers Great Northern Express Reefer
R.K. Maroon wrote:As I understand it, Great Northern had a large fleet of express reefers and, like PRR boxcars, could be found roaming over a large expanse of the U.S. rail network. I do not know if this had anything to do with it, but several O-scale manufacturers offered versions of this reefer.
There are a couple of clips of express reefers at speed in this video, starting at the 8:55 mark: NYC Steam
Yes, it is very nicely done - I assume it was brass when I first glanced at the picture.bob turner wrote:I have not seen one anywhere near that nice.
- R.K. Maroon
- Posts: 3141
- Joined: Tue Feb 22, 2011 9:20 pm
Re: The Tridaily Doorstop #17 -- Walthers Great Northern Express Reefer
Thanks for the link, Chris -- It's all eye candy. I particularly like the three-door horse/scenery car at 9:33. The REA got these eventually, I believe.
Here for comparison is an earlier Walthers model of the same GN express reefer:

I believe this is the version as first introduced by Walthers, somewhere in the mid-1930s. Note the wide (too wide?) doors and the simple bent-wire latch. I have had two of these cars -- near identical to each other -- pass through my shop. Here is a photo of the underside of the other car:

The frame is cast aluminum and trucks have cast bronze sideframes and a steel bar-stock bolster:

Check out the funky couplers. Walthers marketed an automatic coupler before the war. I have a couple of them NOS, but they don't look like this. Not sure of the origin of the ones on the car.
Here for comparison is an earlier Walthers model of the same GN express reefer:
I believe this is the version as first introduced by Walthers, somewhere in the mid-1930s. Note the wide (too wide?) doors and the simple bent-wire latch. I have had two of these cars -- near identical to each other -- pass through my shop. Here is a photo of the underside of the other car:

The frame is cast aluminum and trucks have cast bronze sideframes and a steel bar-stock bolster:

Check out the funky couplers. Walthers marketed an automatic coupler before the war. I have a couple of them NOS, but they don't look like this. Not sure of the origin of the ones on the car.
The link below any photo will display the image full size
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: The Tridaily Doorstop #17 -- Walthers Great Northern Express Reefer
You have motivated me. As soon as I am off the couch, I will shhot about half my fleet, in hopes of overwhelming you with similar cars. Ninety seven at the airport today, so I took it easy. Only 12 landings. Where is my lemonade?
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: The Tridaily Doorstop #17 -- Walthers Great Northern Express Reefer
Lemonade arrived. It's Magic!
Pretty sure I have a Great Northern Express car here somewhere - but I captured three for you:

Pretty sure I have a Great Northern Express car here somewhere - but I captured three for you:
- R.K. Maroon
- Posts: 3141
- Joined: Tue Feb 22, 2011 9:20 pm
Re: The Tridaily Doorstop #17 -- Walthers Great Northern Express Reefer
I like that California and Oregon model. Is there a story behind the road and/or car?
Pete asked me about the car end, so I managed to get a photo today:

I noticed when I took this out of it's storage box that there was a note indicating that it was a Walthers but "customized". I surveyed the other Walthers GN express reefers I have and the catalogs too. There is too much on this to cover here, but I think the note is correct. Three variants appeared in the catalogs over the years. The other models I have match the catalog descriptions of one or another of these variants reasonably well. This one does not, however, which may explain why it is the best looking of the ones I have (that is, somebody went to the trouble to upgrade the kit model).
Pete asked me about the car end, so I managed to get a photo today:

I noticed when I took this out of it's storage box that there was a note indicating that it was a Walthers but "customized". I surveyed the other Walthers GN express reefers I have and the catalogs too. There is too much on this to cover here, but I think the note is correct. Three variants appeared in the catalogs over the years. The other models I have match the catalog descriptions of one or another of these variants reasonably well. This one does not, however, which may explain why it is the best looking of the ones I have (that is, somebody went to the trouble to upgrade the kit model).
The link below any photo will display the image full size
Re: The Tridaily Doorstop #17 -- Walthers Great Northern Express Reefer
...and that PSC lost-wax steam line connection casting adds more evidence to that analysis, both my previous post and the now-mentioned note. If the car is not a build from the seventies or eighties (or even later) certainly the detailing and probably the finish is far later than the forties or fifties what with the decals and that steam-bag casting.
Looking at your second car, that strikes me as perhaps a good example of a build of the stock kit. This one shows different treatment of the roofwalk, hatches, doors, brakes, and frame. The builder was certainly not a novice, and the model can't be called an evidential example of Walthers' product for historical purposes, but certainly is a wonderful example of what a builder can make of one.
I rest my case.
Grin!
Looking at your second car, that strikes me as perhaps a good example of a build of the stock kit. This one shows different treatment of the roofwalk, hatches, doors, brakes, and frame. The builder was certainly not a novice, and the model can't be called an evidential example of Walthers' product for historical purposes, but certainly is a wonderful example of what a builder can make of one.
I rest my case.
Grin!
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: The Tridaily Doorstop #17 -- Walthers Great Northern Express Reefer
The railroad existed. Doubt it ever had an express reefer. This one may have come in as a GN-lettered car - I will know more about that with a search of the hangars this afternoon.
Note that this one has bronze All Nation truck side frames - better than Lobaugh, although maybe undersized a few percent. The cable on one end is so I can use it for electrical pickup. Some of my locomotives have insulated wheels on one side only, and need a "tender." True of the Tuscan car soon to be posted.
Here is what may be my first kit-built wood ice car, and maybe second O Scale freight car. It was 1 1/8' gauge with Bowser truck sideframes at one time, but it appears to have been converted with Lobaugh trucks. The big splits in the sides have been "fixed" several times - the only cure is one-piece plywood scribed sides, and I will not build a wood sheathed car any other way now.

Note that this one has bronze All Nation truck side frames - better than Lobaugh, although maybe undersized a few percent. The cable on one end is so I can use it for electrical pickup. Some of my locomotives have insulated wheels on one side only, and need a "tender." True of the Tuscan car soon to be posted.
Here is what may be my first kit-built wood ice car, and maybe second O Scale freight car. It was 1 1/8' gauge with Bowser truck sideframes at one time, but it appears to have been converted with Lobaugh trucks. The big splits in the sides have been "fixed" several times - the only cure is one-piece plywood scribed sides, and I will not build a wood sheathed car any other way now.
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 50 guests
