The Tridaily Doorstop -- Bob's Mexicano Electric

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
Rufus T. Firefly
Posts: 42236
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby Rufus T. Firefly » Mon Mar 21, 2022 8:16 am

.
Last edited by Rufus T. Firefly on Tue Apr 26, 2022 5:10 pm, edited 1 time in total.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
sarge
Posts: 5138
Joined: Thu Apr 02, 2009 2:21 pm
Location: Dungfield Manor

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby sarge » Mon Mar 21, 2022 11:17 am

Forgive me the sacrilege, for I am somewhat outside the fold of collectors (and I preface the following with the notion this is not offered with any disparity intended) but I have to say I think you guys are over-analysing this by quite a bit. I don't know why common abuse and age is too simple to be acceptable, not when there is some sort of weird material properties problem that will suddenly come clear in an engineering epiphany to which all and sundry will nod wisely and reverently. Grin!

How many old diecast postwar 2-4-2 that have been chucked in the closet or attic after years of play have we all seen with half the paint knocked off, the cab eaves cracked or knocked away, and are missing a marker or two? What is so magical about these 700 series things that makes them somehow above such a mundane and common fate and therefore any damage must come from some much more fascinating cause? They weren't iconic collectables to be placed on an alter and admired in hushed whispers for the vast majority of their lives. :roll: :lol:

That being said, either leave it as it is as a matter of honest history, or knock the loose paint off and blend in some Trucolor black with an airbrush (a nice satin finish that should match within reason), fix the crack, get a couple doors, and enjoy it for what it really is.

It ain't like Christ drank from it at the Last Supper or anything. GRIN!

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby bob turner » Mon Mar 21, 2022 12:10 pm

Disagree. For the last 40 years - half the lifetime of these cars - their market value has been consistently higher than high end brass freight cars, assuming pristine condition with couplers not snipped off. Metal was of excellent quality for most of them - caboose floor and roofwalks warped and decals yellowed, but not much else. And they were considered top-of-the-line in 1940, hence their rarity (relatively speaking).

This one has little evidence of abuse save for the crack, blemishes, and missing hopper doors. Mine have only been on the proverbial shelf since 1961, suffering only the yellowing of white paint and decals.

If something were going to break due to mishandling, it would be those Bettendorf sideframes. They are strong, but kind of lacy, with steel pins ready to lever them into pieces.

User avatar
sarge
Posts: 5138
Joined: Thu Apr 02, 2009 2:21 pm
Location: Dungfield Manor

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby sarge » Mon Mar 21, 2022 12:41 pm

bob turner wrote: And they were considered top-of-the-line in 1940, hence their rarity (relatively speaking).


Were they really, or was it just the first attempt at cracking into an established scale marketplace by a toy manufacturer, attempts Lionel has made periodically and unsuccessfully throughout their history?

Their rarity today could just as easily been due to marketing failure (and a bit of bad timing in this case, due to WWII) as happened with their OO and HO ranges before and after the war.

I question your assignment (your opinion) of "top-of-the-line" compared to the fidelity of the existing scale companies mainstream offerings at the time, even Egolf's X29 of fifteen years earlier compares as a model of a prototype.

There is a TCA cachet assigned to all things Lionel that smacks of mythology to me, I'm afraid.

User avatar
Rufus T. Firefly
Posts: 42236
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby Rufus T. Firefly » Mon Mar 21, 2022 12:46 pm

.
Last edited by Rufus T. Firefly on Tue Apr 26, 2022 5:11 pm, edited 1 time in total.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby bob turner » Mon Mar 21, 2022 1:33 pm

Opinion, of course. I have only examined one Egolf car, and while quite good it does not hold a candle to these 700-series cars. As far as I am concerned, the quality and overall fidelity of these cars measures quite well against the more standard Lobaugh and Scale Craft of the day, and I sold my PSC box car, opting to keep the Lionel as more in keeping with my desires.

These cars in pristine condition can bring a grand or so each. Sure, it is due to rarity and some form of Lionel cachet, but the quality was, and is, there. They were so far ahead of their time - they stack up well against a lot of currently available cars.

The tank car is my favorite. I have tank cars from lots of sources including USH, and except for the talgo couplers, the 715 tank is simply better looking than any of the others. The box car was an experiment in Bakelite or something, and is lowest on my scale of goodness. I prefer metal or wood.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby bob turner » Mon Mar 21, 2022 1:59 pm

Iam sure this will drive Dave nuts - before I re-gauged the display track

Image

Re-decalled and 2-railed, it is not worth quite as much as a pristine example with peeling decals, but still I bet it is a $500 car. Of course intrinsically it is closer to $150, since we could easily get it reproduced today as K-Line did with the hopper. Williams did these in brass, but they are not nearly as good.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby bob turner » Mon Mar 21, 2022 2:02 pm

Williams version, modified to look halfway decent

Image

They could have easily duplicated the Lionel truck, but for some reason the 3-rail companies have chosen a weird split-bolster design, which only comes sort of close. I am not even sure it is more rugged, if that is what they were after.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby bob turner » Mon Mar 21, 2022 2:06 pm

Here is the box car - integral ladders and grabs are no doubt what removes it from Sarge's list of good models. It is the least of the 700s, and indeed an experiment. Still, it stays in my collection, even though worth more than the PSC I sold happily.

Image

User avatar
sarge
Posts: 5138
Joined: Thu Apr 02, 2009 2:21 pm
Location: Dungfield Manor

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby sarge » Mon Mar 21, 2022 3:13 pm

Nope, not convinced. That boxcar as a model of a boxcar is not light years beyond anything of its era. I'm not sure its even intended to follow a particular prototype. If it does, its unrecognisable as to prototype from the photo. In that, Egolf at least followed the X29 respectably and did so in 1925.

I stick to my lonely windswept position of the 700 series (including the fabled 700E, which has a huge visual dimensional clanger or two) is really nothing special for its era, and prototype fidelity was at least equaled if not surpassed by others already in the scale field and probably for less money, though Icken's locos weren't exactly chump-change in those days. That would more easily explain any rarity.

User avatar
Rufus T. Firefly
Posts: 42236
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby Rufus T. Firefly » Mon Mar 21, 2022 3:19 pm

.
Last edited by Rufus T. Firefly on Tue Apr 26, 2022 5:11 pm, edited 1 time in total.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby ScaleCraft » Mon Mar 21, 2022 3:25 pm

Martin- Replacement hatches, but plastic.


Sarge and Burner:

I have a couple of these boxcars. The bakelite shells are fragile, not just the main body but the cast in ladders and grabs.

To me the scale-killers are cast in ladders and grabs. and three-rail style angle door guides with drive pins to hold them in place.
Same shXt as three-rail cars.

Twenty dollar cars except for the glassy-eyed collectors
Dave....gone by invitation

User avatar
Rufus T. Firefly
Posts: 42236
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby Rufus T. Firefly » Mon Mar 21, 2022 6:11 pm

.
Last edited by Rufus T. Firefly on Tue Apr 26, 2022 5:11 pm, edited 1 time in total.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby R.K. Maroon » Mon Mar 21, 2022 11:14 pm

It seems to me that the merits of the Lionel 716 scale hopper have been elbowed out of the conversation here so we can all beat up on the Lionel crowd in general (it's been done to death, so no fun for me in that) and the 714 boxcar in particular. I can't say anything one way or the other regarding prototype accuracy, but I think the 716 is a pretty good model. A comprehensive three-part series on pre-war hoppers appears in OST 109, 111, and 112. Thumbing through those, I would say there are only five models that stand up reasonably well by today's standards: the Mini-I-Scale and Lionel diecast quads and Rail Craft's three tinplate twins. All the rest are sand-cast, wood, or cardstock -- I like them, but I wouldn't go out of my way convince the average O-scaler that they need one on their layout. Of the remaining five, the Min-i-Scale quad is 17/64s and weighs over two pounds, which makes it problematic for regular service on an operating 1:48 layout. I prefer the Rail Craft twins to the Lionel quad, but rust and time are generally not kind to the Rail Crafts -- most of the ones that have passed through my shop were in need of complete restoration. The 716 by comparison seems to hold up pretty well (I have two, both in good shape).

Here for completeness is a listing for the 716 that appeared in the 1942 catalog of the Model Railroad Shop, Dunellen, New Jersey:

Image

Note that this car was sold both ready to run and as a kit. I have a 714 boxcar lettered for Seaboard that has no sign of ever having been factory lettered. That is no certainty but it leads to me think that maybe it started life as a kit and that perhaps the kits were unlettered. Given that, I wonder if the 716 kit arrived lettered or not? An academic question, yes, but inquiring minds want to know.

Jim
The link below any photo will display the image full size

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: The Tridaily Doorstop -- #14 Lionel B&O Hopper

Postby ScaleCraft » Mon Mar 21, 2022 11:30 pm

Kits were unlettered, if I recall, but came with stick-on lettering. Some Lionel ex-spurt told me once they were not decals.
I LIKE the hopper, and REALLY like the tanks. The pre-war tank carried over to postwar pretty much intact except for trucks.
And I have a BUNCH of postwar tanks.
I have a hopper here, needs work, on the list.
Have two boxcars. Roofwalks were Zamac and most are GONE as far as integrity. You can get Merchandise car roofwalks (I did) with a slot in the roofwalk, tape and backfill with JB Quick, paint it when you paint the car. There are 4 or 5 spring clips pinned to tabs on bottom of roofwalk that the sides push into to hold it all together.
Also, you can buy the truck bolster with shank, some places advertise with complete coupler but never have them in stock. Main body of coupler integral with shank, you buy the moveable jaw, drop pin separately, the pivot pin...recommended you use a small nail. Seriously. I have the parts here for four trucks.
Tank car, if I recall, comes body mounted, no idea how that was expected to work, mixing talgos and body mount on sharper curves.
Dave....gone by invitation


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 44 guests