The Tridaily Doorstop -- Bob's Mexicano Electric

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
Dennis Holler
Posts: 474
Joined: Mon Dec 13, 2010 8:31 pm

Re: The Tridaily Doorstop -- #6 Alexander PRR Tank Car

Postby Dennis Holler » Fri Feb 18, 2022 10:17 am

I think saw one still with a wrapper on ebay a few years back, I should have been more interested but it sold for $50 or so and I let another bidder have it lol. I have one complete and it is missing it's wrapper. It is rolling on Auel trucks and someone added a railing around the dome on those two walkways. Kind of like that little addition. Interestingly, under this Black paint is the Bright bold Orange/Yellow that would have been a Shell paint job..... Kinda sad he painted over the Shell paint to go Black Sinclair!! lol.
Image
Image

And a loose Alexander frame with the identifying imprint...

Image

Interestingly, I have never seen a one piece cast frame walthers tank car although they advertised offering their tanks with either the built up or solid frames. Could it be that with that backdoor deal Walthers and Ed supposedly made that Walthers intended this Alexander frame to be in their catalog but it never came to be?
Doorstop Rookie

bob turner
Posts: 13675
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop -- #6 Alexander PRR Tank Car

Postby bob turner » Fri Feb 18, 2022 12:59 pm

It has its charm, but not $50 worth. If you like wood tank cars, they are really easy to make from scratch. Very small aircraft cotter pins make dandy handrail posts.

I have done them with wood and brass underframes - just to prove one can have a fleet of tank cars for cheap. I have become enamored with the 12,000 gal tank, and may make some more.

The real secret is lacquer-based sanding sealer. Three coats, sanded in between, and looks like metal!

bob turner
Posts: 13675
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop -- #6 Alexander PRR Tank Car

Postby bob turner » Fri Feb 18, 2022 1:58 pm

Here is a prewar Lobaugh 12,000 gal tank. It is the only one I have ever seen, except in the catalog:

Image

bob turner
Posts: 13675
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop -- #6 Alexander PRR Tank Car

Postby bob turner » Fri Feb 18, 2022 10:05 pm

Except for the trucks, these are all brass, and lots heavier than the imports we have become used to.. No idea of their provenance, but I have three identical tanks. Three of my favorites!

Image

User avatar
R.K. Maroon
Posts: 3140
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop -- #6 Alexander PRR Tank Car

Postby R.K. Maroon » Fri Feb 18, 2022 11:15 pm

Those are all great tank cars. Thanks for posting. It's easy to accumulate a lot of these. Something about the variations is size, style, and markings makes them appealing (at least to me, but I am guessing others as well).

Dennis was kind enough to post a top view of the frame of the Alexander -- I had not previously seen that view, which shows the builder's mark. Here is the underside:

Image

Trucks are Athearns -- spare original Alexander trucks are hard to come by. Note that the end sills are not straight across, but peaked, which is how I spot these cars. The Alexander is the only model I have seen with this feature, though of course I won't be shocked if there are others. It does raise the question of prototype though. I wonder if one could find it in the Car Builder's Cyclopedia, which seems to have been the source for prototype information for many of the early models.
The link below any photo will display the image full size

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: The Tridaily Doorstop -- #6 Alexander PRR Tank Car

Postby ScaleCraft » Fri Feb 18, 2022 11:48 pm

I think the peaked end beams are more of an aberration to allow cars to navigate tight curves (as in, tinplate).

You know how the real railroads did tight curves, like around a drydock?

Drop-in coupler extension bars.
Seen it.

https://c1.staticflickr.com/1/796/40412 ... 719f_b.jpg

That one's cast, seen them longer and built-up.
Dave....gone by invitation

Dennis Holler
Posts: 474
Joined: Mon Dec 13, 2010 8:31 pm

Re: The Tridaily Doorstop -- #6 Alexander PRR Tank Car

Postby Dennis Holler » Sat Feb 19, 2022 9:09 am

I dug out my Walthers sprung trucks with ball bearings lol, still in the box! Un-insulated and marked for three rail interestingly.
Image
Image
Image
I have a couple more somewhere, but these are interesting just because they are still "mint" in the box as they say lol.
Image
Top and bottom view
Doorstop Rookie

Dennis Holler
Posts: 474
Joined: Mon Dec 13, 2010 8:31 pm

Re: The Tridaily Doorstop -- #6 Alexander PRR Tank Car

Postby Dennis Holler » Sat Feb 19, 2022 9:15 am

Also, on the subject of Blue or other boxes, I mentioned I had a couple of the plain brown boxes and I am not sure of the time frame with these. They are still printed with Crestline Walthers on them, so I am wondering if they could be prior to the Blue Crestline boxes or could they just be early war time production?
Image
Well shoot, sorry for the fuzzy picture, but this is the hopper 3589.
Image
My other two boxes once held sections of a Mikado kit...

So I am curious as to the groups speculation on order of the box styles, are these before or after the Blue boxes?
Doorstop Rookie

Dennis Holler
Posts: 474
Joined: Mon Dec 13, 2010 8:31 pm

Re: The Tridaily Doorstop -- #6 Alexander PRR Tank Car

Postby Dennis Holler » Sat Feb 19, 2022 9:21 am

An finally, hopefully, not derailing Jim's original thread too much, I also found my early Walthers X31 DD PRR boxcar. I had previously stated I had not seen the solid frame on a boxcar yet, so I have to correct myself as this bad boy does indeed have the early cast one piece underframe... I think this would have been kit 3552
Image
Image
Note the brass end wrapper on this car. I am missing the wrap on the other end
Image
And the one piece underframe
Image
And the end detail. The trucks are a little later Walthers production, but at least I was abel to find set of coil elliptic to put on it.
Doorstop Rookie

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: The Tridaily Doorstop -- #6 Alexander PRR Tank Car

Postby E7 » Sat Feb 19, 2022 9:27 am

[quote="bob turner"]Except for the trucks, these are all brass, and lots heavier than the imports we have become used to.. No idea of their provenance, but I have three identical tanks. Three of my favorites!

The one of two (on the left) has what to my eye is perfect proportions. Very similar to the "Hobbyhill" and Precision Scale 10,000 gallon versions. There are many of that ilk in Gary Schrader's layout videos in strings of several back to back.

bob turner
Posts: 13675
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop -- #6 Alexander PRR Tank Car

Postby bob turner » Sat Feb 19, 2022 1:26 pm

I take it back - the domes are Walthers lead castings. All three are more or less identical - I will check on the end beam angles. Now I suspect I have Walthers cars that somebody decided would be better off with brass dowel tanks. Fine with me. Here is the way they arrived at my shop:

Image

User avatar
R.K. Maroon
Posts: 3140
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop -- #6 Alexander PRR Tank Car

Postby R.K. Maroon » Sun Feb 20, 2022 12:07 am

I do like those Walthers sprung trucks that Dennis showed. Too bad they are not more common. I used to be more concerned about finding the original trucks for a model, or possibly "rare and cool" trucks like the sprung Walthers, but I tend to see them more like men's shoes these days -- nobody really looks at them anyway, so the important thing is that they be a good fit.

Dennis also showed a cast Walthers frame. Cars with those are (somewhere) in the queue for posting, along with appropriate catalog scans, etc.

Interesting that those Walthers tank cars of Bob's turn out to have some Walther's heritage. I will be on the lookout to see if there are catalog listings with a brass tank as an option. You never know -- like the ball-bearing wheelsets or the sprung trucks, many things came and went quickly in the early Walthers catalogs.

Here is the catalog shot of the Alexander tank car with the peaked end sill:

Image

In yesterday's post, I speculated on what the prototype would be that had the peaked end, if any. Woody Mathews told me just a year before he passed that many if not most of the early models could be traced to the Car Builders Cyclopedias of the era, as that was pretty much the only widely available source for prototype drawings of railroad equipment. I have since found several old cars in the Train Shed reprints, and thought it a good place to go look for a peaked end sill tank car. It did not disappoint:

Image

The peak angle is not as pronounced as the Alexander, but it is proof that such a car existed. The builder is Canadian Car and Foundry. The accompanying photo is of an Imperial Oil car:

Image

This is a reprint from the 1925 Cyclopedia.
The link below any photo will display the image full size

bob turner
Posts: 13675
Joined: Sat Jan 13, 2007 7:57 pm

Re: The Tridaily Doorstop -- #6 Alexander PRR Tank Car

Postby bob turner » Sun Feb 20, 2022 2:21 pm

This is 1939 Lionel Zamac. I did change it a bit; those are renewed repro decals, and I insulated the wheels. You are looking at 1939 Lionel scale couplers and coil spring trucks. I regard these as the very best tank cars I own, and I have recent imports in the fleet.

Image

User avatar
R.K. Maroon
Posts: 3140
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop -- #4 Walthers PRR Automobile Box Car

Postby R.K. Maroon » Sun Feb 20, 2022 10:22 pm

I want to follow up on the Walthers PRR automobile car I posted back on Page 3:

Image

Bob suggested I give this the Future floor wax treatment. Here is the result, two coats later:

Image

Quite an improvement. I will dull coat it and put it in revenue service. Thanks to Bob for reminding me of this technique. No use buying a bottle of the stuff if you don't think to use it when there is an appropriate opportunity.

Jim
The link below any photo will display the image full size

User avatar
R.K. Maroon
Posts: 3140
Joined: Tue Feb 22, 2011 9:20 pm

Re: The Tridaily Doorstop -- #7 Lobaugh Milwaukee Road Boxcar

Postby R.K. Maroon » Mon Feb 21, 2022 11:43 pm

#7 Lobaugh Milwaukee Road Boxcar
Here is an early Lobaugh boxcar, nicely painted and hand-lettered:

Image

Image

Image

Note the "Lobaugh S.F." mark in the lower right of the last photo above. As with the Katy auto car, this identifies the car as a factory-built model.
The link below any photo will display the image full size


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 48 guests