1/72 Coronado flying boat

Play nice and have fun... AS OF JULY 12 2025, THIS FORUM IS LOCKED.
philo426
Posts: 749
Joined: Sun May 15, 2005 8:51 pm

Re: 1/72 Coronado flying boat

Postby philo426 » Wed Jan 06, 2021 10:28 pm

Airships are cool!

User avatar
Rufus T. Firefly
Posts: 42233
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: 1/72 Coronado flying boat

Postby Rufus T. Firefly » Thu Jan 07, 2021 7:19 pm

Yes; someday I'll clear 1/2 my workbench just to build it!

And, then I'll be stuck trying to figure out what to do with it, :lol: :lol: :lol: :lol: :lol:
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

philo426
Posts: 749
Joined: Sun May 15, 2005 8:51 pm

Re: 1/72 Coronado flying boat

Postby philo426 » Thu Jan 07, 2021 7:22 pm

Hang it up!

J. S. Bach
Posts: 5820
Joined: Wed May 16, 2007 9:30 pm

Re: 1/72 Coronado flying boat

Postby J. S. Bach » Thu Jan 07, 2021 8:17 pm

Rufus T. Firefly wrote:Ok, now you made me climb up on a chair and look - LZ127. Now if I could build it around a bladder for Helium.......

Get one of those Mylar balloons of the approximately correct shape, they are filled with He.

User avatar
Rufus T. Firefly
Posts: 42233
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: 1/72 Coronado flying boat

Postby Rufus T. Firefly » Thu Jan 07, 2021 8:18 pm

J. S. Bach wrote:
Rufus T. Firefly wrote:Ok, now you made me climb up on a chair and look - LZ127. Now if I could build it around a bladder for Helium.......

Get one of those Mylar balloons of the approximately correct shape, they are filled with He.


Yes, but long term? Needs a port for refilling............
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

philo426
Posts: 749
Joined: Sun May 15, 2005 8:51 pm

Re: 1/72 Coronado flying boat

Postby philo426 » Sat Jan 16, 2021 4:56 pm

Rear turrets installed. Image

User avatar
chuck
Posts: 5867
Joined: Thu May 27, 2004 8:43 pm
Location: Plymouth, Michigan
Contact:

Re: 1/72 Coronado flying boat

Postby chuck » Sat Jan 16, 2021 6:48 pm

Are the turrets and guns part of the kit or are you scratch building those or kitbashing from something else. In any case, outstanding work!

I am making progress on the Sabre. I may take some pictures and post those in a separate thread. Still learning/getting used to working with this stuff. Very different environment from injection molding and even scratch building (only scratch build model I've done was a sub (SSN-677 Drum) for a colleague. He was an electrician on the boat (as well as being an all around good guy).

While moving modeling resources out of the basement I found a Kalmbach publication I forgot I had even bought! "Building and Improving Vacuum-Formed Model Aircraft" by E. Staszak. I paid $7 for it back in 1984. Now it's a "collector's item". New, $59, used $28. There is a lot of good info in the book and I really wish I had not lost track of it for almost 37 years! :oops:
Once I built a railroad, I made it run,
Made it race against time.
Once I built a railroad, now it's done --
Brother, can you spare a dime?

philo426
Posts: 749
Joined: Sun May 15, 2005 8:51 pm

Re: 1/72 Coronado flying boat

Postby philo426 » Sat Jan 16, 2021 6:58 pm

Well I am trying to use the kit supplied trabsorencurs but They are crude,so I did what I could!Used aluminum tubing for the gun barrels.I bet that book is cool!

philo426
Posts: 749
Joined: Sun May 15, 2005 8:51 pm

Re: 1/72 Coronado flying boat

Postby philo426 » Wed Jan 20, 2021 9:06 am

Glossed it with Pledge and applied the Image.

philo426
Posts: 749
Joined: Sun May 15, 2005 8:51 pm

Re: 1/72 Coronado flying boat

Postby philo426 » Wed Jan 20, 2021 10:52 am

Image

User avatar
chuck
Posts: 5867
Joined: Thu May 27, 2004 8:43 pm
Location: Plymouth, Michigan
Contact:

Re: 1/72 Coronado flying boat

Postby chuck » Wed Jan 20, 2021 12:40 pm

Beautiful work. Hard to believe it's a vacuform. Thanks for sharing!
Once I built a railroad, I made it run,
Made it race against time.
Once I built a railroad, now it's done --
Brother, can you spare a dime?

philo426
Posts: 749
Joined: Sun May 15, 2005 8:51 pm

Re: 1/72 Coronado flying boat

Postby philo426 » Wed Jan 20, 2021 12:51 pm

Thanks!

philo426
Posts: 749
Joined: Sun May 15, 2005 8:51 pm

Re: 1/72 Coronado flying boat

Postby philo426 » Fri Jan 22, 2021 4:57 pm

Cool!it floats! Image

User avatar
chuck
Posts: 5867
Joined: Thu May 27, 2004 8:43 pm
Location: Plymouth, Michigan
Contact:

Re: 1/72 Coronado flying boat

Postby chuck » Fri Jan 22, 2021 5:30 pm

Woah! Impressive. I don't think I would ever try that but it is impressive!
Once I built a railroad, I made it run,
Made it race against time.
Once I built a railroad, now it's done --
Brother, can you spare a dime?

philo426
Posts: 749
Joined: Sun May 15, 2005 8:51 pm

Re: 1/72 Coronado flying boat

Postby philo426 » Fri Jan 22, 2021 5:58 pm

I thought it would sink!lol!


Return to “The Club Car Lounge”

Who is online

Users browsing this forum: No registered users and 70 guests