Mine complex and windows
Re: Mine complex and windows
I agree with DeBruin, it sure looks like the area south of Nitro. Several that were/ae similar could be found in that area.
roger
I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH
I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: Mine complex and windows
I like it. A lot.
I have a wood concentrator outdoors, but no opening windows. Moving windows is asking for trouble!
I have a structure in the basement kitbashed from several plasticville coaling towers with some S gauge rack coming into the top back, but nothing as nice as this.
I have a wood concentrator outdoors, but no opening windows. Moving windows is asking for trouble!
I have a structure in the basement kitbashed from several plasticville coaling towers with some S gauge rack coming into the top back, but nothing as nice as this.
Dave....gone by invitation
-
Chris Rock
- Posts: 1480
- Joined: Fri Sep 23, 2005 6:08 pm
- Location: United States
Re: Mine complex and windows
Rufus T. Firefly wrote:Chris Rock wrote:The windows became a big challenge because I wanted them to open and close.
So how well does that opening & closing work?
For some reason I'm not seeing you climbing up on the layout to close the windows on those cold snow days....
Rufus,
They work really well. There was an evolution in getting to working windows. Initially I thought they'd be very simple to do. The windows have to be installed before the corrugation is attached and the building is placed and I don't know which I want open or closed beforehand. Also, the buildings are going to have to be transported to Florida and I figured the windows would need to be closed for that trip down the road. You are right, once the buildings are installed in Florida, the windows will likely remain in one position for a good long time.
With my mock-up of the windows being made of paper, the windows certainly opened and closed easily with just a little tape on the back. But when the thickness of the styrene was introduced, moving from the closed position to the open position became impossible without giant gaps at the tops of the window panes. I went through many iterations to finally come to a workable hinge solution. I almost gave up and then it just became a challenge not to lose.
Thanks guys.
-
Chris Rock
- Posts: 1480
- Joined: Fri Sep 23, 2005 6:08 pm
- Location: United States
Re: Mine complex and windows
Guys,
I'll have to look up the Nitro sites. I pulled elements from each of these mines below. I really liked the storage bin on the Nuttalburg mine since it gave variety in height to the complex. And I really liked the head house of the Raven Red Ash and the ability for the road to travel under it. The Nuttalburg mine is still there in West Virginia as a tourist destination. There are hundreds of photos and a few videos of it as it stands now. Some parts of it such as the wash house have fallen away but much of it still remains.


I'll have to look up the Nitro sites. I pulled elements from each of these mines below. I really liked the storage bin on the Nuttalburg mine since it gave variety in height to the complex. And I really liked the head house of the Raven Red Ash and the ability for the road to travel under it. The Nuttalburg mine is still there in West Virginia as a tourist destination. There are hundreds of photos and a few videos of it as it stands now. Some parts of it such as the wash house have fallen away but much of it still remains.
Re: Mine complex and windows
Awesome photos Chris, emphasizes how good your subject model is too relative to the appearance of the real thing, I look forward to the painted and installed result as well.
Political Consultant- Tap into the hidden powers of your public office, insure your future is jail free, well funded. Visit shock and awe upon your adversaries, dominate the media, thrill your followers. contact morbo@happydaysrhereagain.com
Re: Mine complex and windows
I think our reference to Nitro is that that type of mine can be found in southern and southeastern West Virginia.
That is really West By GOD Virginia if I remember correctly. There is nothing profane about that saying.
It is more like a blessing.
That is really West By GOD Virginia if I remember correctly. There is nothing profane about that saying.
It is more like a blessing.
roger
I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH
I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH
- Rufus T. Firefly
- Posts: 42236
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Mine complex and windows
Chris Rock wrote:I went through many iterations to finally come to a workable hinge solution. I almost gave up and then it just became a challenge not to lose.
Got a close up picture of that workable hinge solution. This is something that has been a challenge for a few of my projects. A good solution, i.e., not one of mine, would be a step forward!
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
-
Chris Rock
- Posts: 1480
- Joined: Fri Sep 23, 2005 6:08 pm
- Location: United States
Re: Mine complex and windows
Rufus,
I don't, but I can take a shot tonight if not sooner.
I don't, but I can take a shot tonight if not sooner.
- Rufus T. Firefly
- Posts: 42236
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Mine complex and windows
Chris Rock wrote:Rufus,
I don't, but I can take a shot tonight if not sooner.
Thanks!
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
-
Chris Rock
- Posts: 1480
- Joined: Fri Sep 23, 2005 6:08 pm
- Location: United States
Re: Mine complex and windows
Rufus,Here is a shot of the back. As you can see these are pretty substantial from the back which is why I'm not to worried about their future functionality.

The image on the left shows 2 windows closed. The image on the right shows one window closed and one window open.
Note how the hinges are up on the closed windows and the hinge is down on the open window. They are made of rod in tube. The rod and tube are not welded together so the rod can travel freely through the tube and then get snipped off and blocked on the end.
There is an angled slot which allows the whole hinge to travel down and back for the open window and up and forward for the closed window. The angle back and down makes it so the window can get out of the frame but does not stick out in front of the whole frame. This really was the puzzling part for me.
The hinge holders are made of channel. The channnel faces away from the windows with the angled slots in them. The channel made it easier to get consistent slots because the channel edges allows for the drill bit to rest against it. The two far end channels face in toward the windows to block the rod from coming out of the ends. The blocks are added last. The middle channels have a .010" barrier between them so each side does not interfere with the other.
Then I added the bar with 2 positions to hold the window open, and also hold the window high and tight when closed.
The image on the left shows 2 windows closed. The image on the right shows one window closed and one window open.
Note how the hinges are up on the closed windows and the hinge is down on the open window. They are made of rod in tube. The rod and tube are not welded together so the rod can travel freely through the tube and then get snipped off and blocked on the end.
There is an angled slot which allows the whole hinge to travel down and back for the open window and up and forward for the closed window. The angle back and down makes it so the window can get out of the frame but does not stick out in front of the whole frame. This really was the puzzling part for me.
The hinge holders are made of channel. The channnel faces away from the windows with the angled slots in them. The channel made it easier to get consistent slots because the channel edges allows for the drill bit to rest against it. The two far end channels face in toward the windows to block the rod from coming out of the ends. The blocks are added last. The middle channels have a .010" barrier between them so each side does not interfere with the other.
Then I added the bar with 2 positions to hold the window open, and also hold the window high and tight when closed.
Last edited by Chris Rock on Wed Nov 18, 2020 5:58 pm, edited 1 time in total.
- Rufus T. Firefly
- Posts: 42236
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Mine complex and windows
Thanks; looks and reads complicated and painful.
How many of these did you make prior to reaching for an alcoholic laden beverage?
How many of these did you make prior to reaching for an alcoholic laden beverage?
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
-
Chris Rock
- Posts: 1480
- Joined: Fri Sep 23, 2005 6:08 pm
- Location: United States
Re: Mine complex and windows
One set of windows a night, a little over an hour for the hinges, followed by wine or whiskey. I think there are 14 or 16 total.
- Rufus T. Firefly
- Posts: 42236
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Mine complex and windows
Chris Rock wrote:One set of windows a night, a little over an hour for the hinges, followed by wine or whiskey. I think there are 14 or 16 total.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 37 guests
