Paul Egolf ..in the beginning

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: Paul Egolf ..in the beginning

Postby ScaleCraft » Sat Jul 28, 2018 3:28 pm

jwmathews wrote:Never having seen an Egoff model (afaik), I cannot offer an opinion as to authenticity. As to the appearance of the model, it may be that the builder (whomever it was( was trying to model a Pennsy K4 but didn't have all the correct parts to do everything accurately Not having a full front view, I cannot figure out the intend3d appearance of the pilot.

The placement of the sandboc forward of the bell. while not "typical" of the K4, is not totally incorrect. There were at least 20 or so prototypes built this way. I call them the "Lines West" K4, because this forward location of the sandbox (standard on the L1 Mikad'os) was used on locos operating in areas west of Pittsburgh, where some locations had refueling bunkers located above mainline tracks. This arrangement allowed locos to pause without uncoupling from the trains and replenish the sandboxes & fill their tenders without jockeying around. There are published photos of some of these locos. A softcover booklet by Harry Albrecht on the K4s has a few. The most notable examples of this arrangement are probably the four locos streamlined in 1940-41 for the new coach trains operating to St Louis and "The South Wind: between Chicago & Louisville


Of primary consideration, initially, was the catalog photo used to support the photo.
Yes, the PRR changed and modified a lot....so much for the "Standard of the World". But add it up, Woody.
Valve gear, valve gear hanger, crosshead, crosshead guide, dome HEIGHT difference and PLACEMENT, bell placement, class lights, rods, pilot, handrails, actual Belpaire.

Someone who is proud enough of his work to sign units (stamped) and who built as many of these as is claimed 80+ years on...and then compare to photos of a known Egolf K4....and Houston, we have a problem.
Dave....gone by invitation

Carey Williams
Posts: 690
Joined: Sat Dec 24, 2016 3:10 pm

Re: Paul Egolf ..in the beginning

Postby Carey Williams » Mon Jul 30, 2018 1:10 pm

Hello all ..sorry for the delay ..I was out riding antique bicycles ...

Jim thank you for your very kind offer ...oh yes I'd be very interested in a run of O scale news ...I've only been able to pick up a few odd copies ...just let me know costs ...thank you very much ..

Sarge thank you for posting the photos of the lovely K4 and box car .... do you have any photos of the bottom of the K4 ? ...was it 2 rail or 3 ? .....trailing truck looks very similar to my engine .

Below is the only official "Egolf" ..that I've held in my hands ... lettered Egolf ..... this was Paul's display piece came with 3 matching passenger cars .... the engine is 2 rail so later period Egolf 1932 or after ....as a display piece we should assume this would be one of his better pieces to show off his talents .... this engine does not have steam


IMG_7283.JPG
IMG_7283.JPG (1.95 MiB) Viewed 7188 times

IMG_7284.JPG
IMG_7284.JPG (737.85 KiB) Viewed 7188 times

IMG_7287.JPG
IMG_7287.JPG (1.51 MiB) Viewed 7188 times

IMG_7285.JPG
IMG_7285.JPG (1.39 MiB) Viewed 7188 times



When I first saw my engine ... the drive gear stuck out ... as the link to this Egolf ...

In the Egolf catalog of 1928 ..... he mentions

steam engine have steam device ... mine has the remains of a pipe fitting to smoke stack

resistor used for headlight so small flashlight bulb will be used ...mine has the resistor..and a flashlight bulb in headlight

a glowing fire box ..mine has wiring going down to to what I'm guessing would have been a socket ..inner walls of firebox painted silver fro reflection


center 3rd rail operation .. mine is for 3 rail operation ..no sign of outside 3rd rail ..but nice shiny spot where center pick up was ..

The catalog also offers a few cheaper engines that use tinplate motors .. .so Egolf did off less than "perfection"

I'm a newbie here ....but it appears that O scale models from the 20's were working the learning curve ...check out Modelmakers from 28-29 ..and see Ickens with much ICK ...compared to his later work ...when Baker joined his team quality step up big time .

The 1938/9 Jerry White door stop of brass ..was a far cry from his Perfection days of the 50s' .

Just saying the Wright Bros did not fly the first time out .... all these master builders ...had their early years ...

My engine could easily have been built by a Egolf copy cat .... ..those among us who are without fault can throw the Baldwin E unit .... if they can lift it.

Cheers Carey

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Paul Egolf ..in the beginning

Postby bob turner » Mon Jul 30, 2018 1:22 pm

Is that the one Bill Paul captured? He was so proud of that eagle on the firebox.

I like that cab better than mine, although mine is bigger than the one on the drawing. I may capture that image for my "Reading G1" file.

User avatar
Rufus T. Firefly
Posts: 42236
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Paul Egolf ..in the beginning

Postby Rufus T. Firefly » Mon Jul 30, 2018 3:34 pm

bob turner wrote:Is that the one Bill Paul captured? He was so proud of that eagle on the firebox.


Looks more like a coat of arms than an eagle.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

Carey Williams
Posts: 690
Joined: Sat Dec 24, 2016 3:10 pm

Re: Paul Egolf ..in the beginning

Postby Carey Williams » Mon Jul 30, 2018 3:44 pm

Hello all ...yes the engine "was" Bill Paul's .... not mine ...but in good hands..

Cheers Carey

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: Paul Egolf ..in the beginning

Postby ScaleCraft » Mon Jul 30, 2018 4:00 pm

Good. I suspected his would be "marked", as this example is.
However: What is it supposed to BE?
Belpaire?
Reading cab windows?

Here is their FIRST Pacific, K-28 (and only one):
http://www.northeast.railfan.net/images/prr7067.jpg
No Belpaire, but cab windows and size.

Your initial showing of a catalog page from Egolf showed PRR K4S 5400 class. So, did he make a K-28? K2? K3?

I used to do PRR until I moved out west after The Navy days were over and started into NP.
You know how to spot a PRR modeller?
He asks "what shade of black is Brunswick Green?"

The chassis on this one may have a similar worm gear to the first one you showed, but nothing else matches, it appears.
Last edited by ScaleCraft on Mon Jul 30, 2018 6:28 pm, edited 1 time in total.
Dave....gone by invitation

User avatar
Rufus T. Firefly
Posts: 42236
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Paul Egolf ..in the beginning

Postby Rufus T. Firefly » Mon Jul 30, 2018 4:14 pm

ScaleCraft wrote:Good. I suspected his would be "marked", as this example is.
However: What is it supposed to BE?


Looks all Reading or P&R to me with Wootten firebox, etc.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: Paul Egolf ..in the beginning

Postby ScaleCraft » Mon Jul 30, 2018 4:16 pm

Rufus T. Firefly wrote:
ScaleCraft wrote:Good. I suspected his would be "marked", as this example is.
However: What is it supposed to BE?


Looks all Reading or P&R to me with Wootten firebox, etc.

That's why I put that last link up.
Dave....gone by invitation

User avatar
Rufus T. Firefly
Posts: 42236
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Paul Egolf ..in the beginning

Postby Rufus T. Firefly » Mon Jul 30, 2018 4:57 pm

ScaleCraft wrote:
Rufus T. Firefly wrote:
ScaleCraft wrote:Good. I suspected his would be "marked", as this example is.
However: What is it supposed to BE?


Looks all Reading or P&R to me with Wootten firebox, etc.

That's why I put that last link up.


Confused - your last link seems to depict a Gulf, Mobile & Northern G-1 Pacific.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: Paul Egolf ..in the beginning

Postby ScaleCraft » Mon Jul 30, 2018 6:11 pm

That's true. Copied the wrong link, then deleted the string.
I'll have to regenerate.
Simply cab windows sure indicates non-PRR, but, hey. Never know.
At least he has the PRR tender to go with the first one.
Dave....gone by invitation

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Paul Egolf ..in the beginning

Postby bob turner » Mon Jul 30, 2018 6:14 pm

Come on you guys. Reading G1.

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: Paul Egolf ..in the beginning

Postby ScaleCraft » Mon Jul 30, 2018 6:17 pm

Now this is hilarious. Sometimes a string generates slightly differently.
This time, early hit is to Graham's Trains...yeah, a model...but THIS model!

http://www.grahamstrains.com/store/Weav ... -TMCC.html

Right down to the road number for a Reading G2SA:

Image
Dave....gone by invitation

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: Paul Egolf ..in the beginning

Postby ScaleCraft » Mon Jul 30, 2018 6:27 pm

bob turner wrote:Come on you guys. Reading G1.

G1's were 105-129, 108, 117-118, 130-134, 200-204, plus the streamlined 178.

G2's were 175-179.

Now the question is, is that 175 a fair representation of a G1 or a G2?
Dave....gone by invitation

User avatar
Rufus T. Firefly
Posts: 42236
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Paul Egolf ..in the beginning

Postby Rufus T. Firefly » Mon Jul 30, 2018 7:00 pm

ScaleCraft wrote:
bob turner wrote:Come on you guys. Reading G1.

G1's were 105-129, 108, 117-118, 130-134, 200-204, plus the streamlined 178.

G2's were 175-179.

Now the question is, is that 175 a fair representation of a G1 or a G2?


Rex is the Reading man......
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
rex desilets
Posts: 1786
Joined: Sun Jul 15, 2007 2:18 pm

Re: Paul Egolf ..in the beginning

Postby rex desilets » Mon Jul 30, 2018 8:00 pm

Rufus T. Firefly wrote:
ScaleCraft wrote:
bob turner wrote:Come on you guys. Reading G1.

G1's were 105-129, 108, 117-118, 130-134, 200-204, plus the streamlined 178.

G2's were 175-179.

Now the question is, is that 175 a fair representation of a G1 or a G2?


Rex is the Reading man......
I have books...besides, the Reading is associated with Philly and the Schuylkill River.

Regarding the model: You'd have to measure the superstructure..carefully. The G2 was a bit larger than the G-1. It also had 80" drivers. If the model drivers measure out to 74", it "could" be a G-1sbs. Depends on your degree of finicky.

I do appreciate the Reading, especially the Brobdingnagian K-1s 2-10-2. Unfortunately, I'm in the minority so far as getting one produced.
“Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.” – John Adams


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 42 guests