The PECKING order

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
rex desilets
Posts: 1786
Joined: Sun Jul 15, 2007 2:18 pm

Re: The PECKING order

Postby rex desilets » Sat Jan 27, 2018 11:17 pm

Is MAC Shop still in business?
“Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.” – John Adams

Jay Criswell
Posts: 2004
Joined: Thu Mar 06, 2008 12:38 pm

Re: The PECKING order

Postby Jay Criswell » Sat Jan 27, 2018 11:21 pm

Bob,

I wonder if PSC would cast them in aluminum?

Jay

Seaboard Air Line Fan
Posts: 1308
Joined: Mon Mar 08, 2004 9:49 pm
Location: Virginia

Re: The PECKING order

Postby Seaboard Air Line Fan » Sun Jan 28, 2018 7:47 am

Rex,

The USP wrapper is thin, a couple of thousandths of an inch at most (guessing at .015" or less). The USP body core has a clear styrene skeleton the wrapper adheres to, but I wasn't too successful making it happen. Take a look at some of the photos in this old OGR topic I posted:

https://ogrforum.ogaugerr.com/topic/union-station-products-passenger-car-components?reply=71819767964075494#71819767964075494

You can see the warping on the roof. I got another wrapper and cut the sides from the roof (made 3 pieces) then glued them to the OK Engines aluminum shell.

USP probably has a good thing there for HO, but O (IMO) is too big to try putting that big of a piece (maybe 9"x21") of styrene on top of another form. Super glue may help, but if you don't get it lined up correctly your SOL.
BobD aka Drifty

The Crow Flies At Midnight

User avatar
sarge
Posts: 5138
Joined: Thu Apr 02, 2009 2:21 pm
Location: Dungfield Manor

Re: The PECKING order

Postby sarge » Sun Jan 28, 2018 10:30 am

The biggest problem with styrene laminations is the result of using the "go-to" solvent that intuition has you reaching for. It outgasses and gets captured and eats away at it and the whole becomes a mess. To give the devil their due, if memory serves USP tells you to use double-side tape in their instructions; an odd solution but tells me they know about laminating with solvents and told-ya-so in the instructions which as men we never read. :) :D

In UK modelling the go-to glue (not solvent, but glue) is referred to (sometimes erroneously) as PVA, since the British Nanny State hasn't allowed the the populace to be sold on CA as the only alternative to solvents. Elmers and Carpenters Glue are true PVA's. I often use some of the friskier stuff sold in the UK, and finally found a reasonable equivilent in America in "Weldbond". When your wife drags your downcast carcass to the craftstore, look for it there or off Amazon.

I never thought to try it for large styrene laminations, but Nev Rossiter turned me to this technique. I have used it for large plastic laminations very successfully, figure your clamping beforehand as a tight joint is required and you do get some working time out of the deal. So long as you put it all up tightly, it stays assembled (you'll destroy stuff trying to tear it apart) with no outgassing effect.

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: The PECKING order

Postby E7 » Sun Jan 28, 2018 11:11 am

Rufus T. Firefly wrote:
De Bruin wrote: I have evolved to using liners, window treatments like shades, putting in enough interior to keep the view from looking empty or see through when it should not, and I use the same approach with under bodies. But I'm no fine scale modeler that's for sure.


I perform similar exercises for the same reason. Limit the "nakedness" of empty interiors and absent underbodies that detract from the appearance of the model. Whether it's accurate is another issue - I'm not a precise prototype model. I rarely build prototype models as I find that a boring pursuit.


I am in definite agreement that accuracy, or maybe I should say "total fidelity to the prototype" can be a pain in the arse. I feel fairly safe saying that "good enough" satisfies most of us here. Some of those "good enoughs" involve more accuracy than others, and while the outcomes are different, the philosophy is the same. I admire the P48 guys for their dedication, but I sure ain't going to be narrowing the gauge of all my stuff a minute fraction.

User avatar
Rufus T. Firefly
Posts: 42236
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: The PECKING order

Postby Rufus T. Firefly » Sun Jan 28, 2018 11:31 am

sarge wrote:In UK modelling the go-to glue (not solvent, but glue) is referred to (sometimes erroneously) as PVA, since the British Nanny State hasn't allowed the the populace to be sold on CA as the only alternative to solvents. Elmers and Carpenters Glue are true PVA's.


Here's where one can get confused.

PVA = Poly(vinyl acetate)
PVA = Poly(vinyl alcohol)

They are not equivalent and the former is indeed what Elmer's Carpenter's Glue is made from......

BTW -- CA is a Poly(cyanoacrylate)

We have probably already exhausted everyone's tolerance on polymer chemistry at this point. Perhaps I shall write up a brief treatise of the topic for later publication in some arcane tome of ancient and forgotten lore.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

Seaboard Air Line Fan
Posts: 1308
Joined: Mon Mar 08, 2004 9:49 pm
Location: Virginia

Re: The PECKING order

Postby Seaboard Air Line Fan » Sun Jan 28, 2018 11:51 am

if memory serves USP tells you to use double-side tape in their instructions


Seems like I tried that too. What we need is 5-minute double-sided tape :lol:

The large surface area of an O scale passenger car negates almost anything that, once stuck, remains stuck (sticken, stucken, ???).

The roof was the issue. (had to rewrite my post here!)

I glued the sides on first to make sure the windows lined up, then added the roof wrap.

I'd like to see OK Engines and USP get together and combine their efforts. Need good ends and floors to finish the package, and a good supply of good trucks. Then top it off with some interiors from Delta Models, PSC, and/or Scale City Designs!!!
BobD aka Drifty

The Crow Flies At Midnight

aterry11
Posts: 663
Joined: Sat Feb 23, 2013 12:20 pm
Location: Omaha Ne

Re: The PECKING order

Postby aterry11 » Sun Jan 28, 2018 12:29 pm

I have also adopted the Dan Pantera model of if you cant readily see it why bother. Speeds up builds.

I will readily stand behind my first observation when jumping back into trains. Sourcing the parts is half the battle. In 6 years now I have tackled soldering, resin casting, step up my game and battle leds, and get better at soldering :roll: :roll: :roll: :roll: :roll: :roll: :roll:

Have also had to track down Lou Cross, Haynes Macdaniel, John Keil, Al Smalls and Dan Pantera to find parts.
Thanks to this forum and others all this was possible. Some don't like thread drift but I liken this place to The Swamp in Mash. Kind of irreverent but we get the job done. :wink: :wink: :wink: :wink: :wink: :wink: :wink: :wink: :wink: :wink:

When I rolled the Exacta blanks. I built a jig per instructions and still got a slight roll differentiation from end to end in the roof area. I am dealing with that now before I epoxy the floor in. Not really a ripple but it just doesn't line up perfect kinda a slight twist.

User avatar
2railjon
Posts: 15906
Joined: Fri Apr 02, 2004 2:33 pm

Re: The PECKING order

Postby 2railjon » Sun Jan 28, 2018 12:38 pm

These are my grail cars! I would love to eventually aquire 4 or 5 of them. :D
Lionel Smithsonian 20th Century Limited.
Image

Image
Running that red block Charlie.

aterry11
Posts: 663
Joined: Sat Feb 23, 2013 12:20 pm
Location: Omaha Ne

Re: The PECKING order

Postby aterry11 » Sun Jan 28, 2018 12:49 pm

Love the operating vestibules and dutch doors on those cars but awfully fragile.

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: The PECKING order

Postby E7 » Sun Jan 28, 2018 2:38 pm

2railjon wrote:These are my grail cars! I would love to eventually aquire 4 or 5 of them. :D
Lionel Smithsonian 20th Century Limited.


Jon,

You might want to jog over to your FAVORITE forum as there is a fairly comprehensive and enlightening thread on the FAM cars:

https://ogrforum.ogaugerr.com/topic/fam ... ation-cars

They weigh circa 5.5 pounds each! Not trying to shoot down your dream, but want you to know what you might be getting into. I am guessing an Observation car might be difficult to find, but you seem to have the ability to pull the rabbit out of the hat. :mrgreen: :lol: :lol: :lol: Good Luck my friend!

Rich

User avatar
Rufus T. Firefly
Posts: 42236
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: The PECKING order

Postby Rufus T. Firefly » Sun Jan 28, 2018 2:49 pm

rex desilets wrote:I'd think you could use the ends as masters for molds in which to cast new ends in resin.


I did that for a client; sent me the master and I made about 40 ends. I saw them on eBay a few years later when someone was selling off the estate. They were still in the box I had packaged them up in for mailing.

Moral of the story is don't send me pass car ends to make copies of for you!
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

Seaboard Air Line Fan
Posts: 1308
Joined: Mon Mar 08, 2004 9:49 pm
Location: Virginia

Re: The PECKING order

Postby Seaboard Air Line Fan » Sun Jan 28, 2018 3:01 pm

Moral of the story is don't send me pass car ends to make copies of for you!


Or don't die before you get a chance to use them :wink:

Maybe you should put in a "PRECAUTION" notice in your mailings :!: :wink: :lol: :mrgreen: :twisted:
BobD aka Drifty

The Crow Flies At Midnight

User avatar
sarge
Posts: 5138
Joined: Thu Apr 02, 2009 2:21 pm
Location: Dungfield Manor

Re: The PECKING order

Postby sarge » Sun Jan 28, 2018 3:11 pm

Jon;

Bugger the nay-sayers on OGR &c, most of which have never even touched one of the Fine Arts Century cars. Like anything, take care of it and handle the dingus with the same respect of any decent piece of scale equipment, and don't handle it with the Lionel guy one-hand crush-clutch (lets buy a range like Intermountain and ruin the fineness of the detail so it's strong enough for little hands. Grin!), and they are are some of the most gorgeous cars out there, just like their Hudson.

Amases me how a beautiful range like Intermountain (or these Fine Arts cars) are "too fragile" in O and have to have overclutz grabs and diesels have to have ugly stamped handrails, but the HO guys have the finest of cross-sections for such things and want finer and finer detail (and performance) yet. Have you looked at N lately? Gorgeous fine appearance!

Anyway, if you seriously want a set, I have a friend of mine in SC that has a set for sale. PM or call me and I'll hook you guys up.

They are not light, but very free-rolling so you should be able to haul them since you have no grades. The trucks have ballbearings so rolling resistance is quite low.

User avatar
sarge
Posts: 5138
Joined: Thu Apr 02, 2009 2:21 pm
Location: Dungfield Manor

Re: The PECKING order

Postby sarge » Sun Jan 28, 2018 3:31 pm

I guess today is my day to take the opposing viewpoint in many discussions, so why not.

I'm odd man out again, but I love proto-modelling. I build just about everything from photos of a particular prototype at a particular time. Love doing it. In 7mm, locos, coaching stock, wagons, the research is as much fun as the building. In US O, I've been having a ball doing the same, though this time of the railroads I remember from youth and early working life. Far from being a pain, I find it worthwhile.

One thing that is a cardinal rule for me, though. I only count my own rivets.

But, count them I do! :D


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 28 guests