.
Re: Help With 2 Rail Wheels For Weaver Car
.
Last edited by 2railjon on Sun May 27, 2018 6:04 pm, edited 1 time in total.
Running that red block Charlie.
Re: Help With 2 Rail Wheels For Weaver Car
.
Last edited by 2railjon on Sun May 27, 2018 6:04 pm, edited 1 time in total.
Running that red block Charlie.
Re: Help With 2 Rail Wheels For Weaver Car
Yeah Kadees aren't cheap unless you can hit an estate liquidation , National show or the March Chicago meet. Conversely I've stopped using them on large uniform passenger consists except on the ends; that is forward most and rear most cars. I have found that vertical travel and slack issues make them problematic with 80' plus cars, and since I don't have a passenger yard like Mott Haven or Sunnyside (like a lot of guys) nor the operational need/practical layout to add and subtract sleepers en route etc., I skip the aggravation. I do like dropping and picking up head end cars, so the end Kadee's facilitate that, but beyond that just not there yet. Again separations/drops with Kadees while running make long shank dummies or Monarch's a no-brainer. My experience with Kadees is they work find with 80's if your layout is dead flat, none of the ones I run on are even close including my own though I tried.
Political Consultant- Tap into the hidden powers of your public office, insure your future is jail free, well funded. Visit shock and awe upon your adversaries, dominate the media, thrill your followers. contact morbo@happydaysrhereagain.com
Re: Help With 2 Rail Wheels For Weaver Car
Long shank, 746's?
18 for shipping for 5 packages (so 10 pair total)? Sounds outrageous if shipped within CONUS.
These guys are my LHS. About 45 minutes away.
https://www.modeltrainstuff.com/Kadee-O ... ad-746.htm
$8/pkg or $4/car. Can't imagine them charging more than $10 to ship a package that small/light, so maybe $50 total for 10 pair?
Not sure if passenger cars are supposed to have tightlock or some other fancy type coupler, but I read over on the proto48 group that Jim Lincoln completed patterns for type E double and lower shelf couplers as well as type H tightlocks. Jimmy Booth is looking at bringing some or all of those to market? Guess I'm going to need to study up on my coupler knowledge and see what tank cars and passenger cars I own might require any of those. Probably won't swap them all out, but having a few on a few select cars on sidings, etc. would be neat.
18 for shipping for 5 packages (so 10 pair total)? Sounds outrageous if shipped within CONUS.
These guys are my LHS. About 45 minutes away.
https://www.modeltrainstuff.com/Kadee-O ... ad-746.htm
$8/pkg or $4/car. Can't imagine them charging more than $10 to ship a package that small/light, so maybe $50 total for 10 pair?
Not sure if passenger cars are supposed to have tightlock or some other fancy type coupler, but I read over on the proto48 group that Jim Lincoln completed patterns for type E double and lower shelf couplers as well as type H tightlocks. Jimmy Booth is looking at bringing some or all of those to market? Guess I'm going to need to study up on my coupler knowledge and see what tank cars and passenger cars I own might require any of those. Probably won't swap them all out, but having a few on a few select cars on sidings, etc. would be neat.
Focus: 2R O-Scale, SOU/SCL 1967-1972
Blog: http://davejfr0.blogspot.com/
Blog: http://davejfr0.blogspot.com/
Re: Help With 2 Rail Wheels For Weaver Car
.
Last edited by 2railjon on Sun May 27, 2018 6:04 pm, edited 1 time in total.
Running that red block Charlie.
- Rufus T. Firefly
- Posts: 42229
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Help With 2 Rail Wheels For Weaver Car
2railjon wrote:Working on the couplers now. These dang Kadee couplers are stupid expensive!I bought 5 pair and some screws and my total was $80! 18 for shipping alone!
That pricing and shipping would seem a combination of theft & extortion,
Shipping was at least double real cost vs. putting it all in a small flat rate box for $6.80
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: Help With 2 Rail Wheels For Weaver Car
.
Last edited by 2railjon on Sun May 27, 2018 6:05 pm, edited 1 time in total.
Running that red block Charlie.
- Rufus T. Firefly
- Posts: 42229
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Help With 2 Rail Wheels For Weaver Car
2railjon wrote:And it’s being shipped UPS Ground at that.
So you'll get it next month?
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: Help With 2 Rail Wheels For Weaver Car
You can pick up Kadee 804 or 805 couplers in packs of six pair for about $15.00 at any Strasburg O meet. George Peckman always has them and he also now stocks the newer versions but I do not remember the cost. Six packs of couplers should fit into a small USPS Priority Mail box and shipping should be around $8.00 max. So for 2018 lets go with $20.00 and $10.00 making the total $30.00 delivered.
Joe
Joe
Joe Foehrkolb
Re: Help With 2 Rail Wheels For Weaver Car
I miss doing business with George Peckham. He use to setup at a local show in Hudson, Ma. I believe he had family in the area which made the trip up worthwhile. He always seemed to have the odds and ends I was looking for as well as the basic supplies like Kadee's priced right.
Robert
Robert
-
Tom Dempsey
- Posts: 1002
- Joined: Mon Dec 23, 2013 10:15 pm
Re: Help With 2 Rail Wheels For Weaver Car
2railjon wrote:And it’s being shipped UPS Ground at that.
There's part of the problem right there.
- Rufus T. Firefly
- Posts: 42229
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Help With 2 Rail Wheels For Weaver Car
Tom Dempsey wrote:2railjon wrote:And it’s being shipped UPS Ground at that.
There's part of the problem right there.
Yup. Like I wrote earlier - $6.80 for a flat rate Priority box is what this should cost.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: Help With 2 Rail Wheels For Weaver Car
.
Last edited by 2railjon on Sun May 27, 2018 6:05 pm, edited 1 time in total.
Running that red block Charlie.
Re: Help With 2 Rail Wheels For Weaver Car
Jon, my young apprentice;
You didn't buy five pairs of Kadees, you bought ten. They retail at $10.10 for a pack of two pair.
The couplers are actually retail, two pair of the new type in long shank for $10.10. The old 804/805 ones are fifty cents less a pair retail, so that isn't outrageous ($5.05 a pair vs. $4.55 a pair).
The shipping for UPS ground is outrageous for what UPS ground is compared to USPS.
So, how many 2/56 by 3/4 screws for $11.85?
You didn't buy five pairs of Kadees, you bought ten. They retail at $10.10 for a pack of two pair.
The couplers are actually retail, two pair of the new type in long shank for $10.10. The old 804/805 ones are fifty cents less a pair retail, so that isn't outrageous ($5.05 a pair vs. $4.55 a pair).
The shipping for UPS ground is outrageous for what UPS ground is compared to USPS.
So, how many 2/56 by 3/4 screws for $11.85?
Last edited by sarge on Mon Jan 08, 2018 3:02 pm, edited 1 time in total.
Re: Help With 2 Rail Wheels For Weaver Car
Yea, I woulda shopped around for the kadees if buying online. Might be a few other folks online that can match MB Kleins (the model train stuff link in my earlier post)
As for screws, I spent 3 minutes on ebay and found this guy with all sizes including 3/4" for $5 shipped. Less than half of what you paid. I could probably find better than that. I bought hundreds of screws at some point years ago when I found a crazy deal with amazon…something like 100 screws for a buck and change. The 1.25" nylon ones have come in handy as well.
https://www.ebay.com/itm/2-56-Machine-S ... 2332950448
As for screws, I spent 3 minutes on ebay and found this guy with all sizes including 3/4" for $5 shipped. Less than half of what you paid. I could probably find better than that. I bought hundreds of screws at some point years ago when I found a crazy deal with amazon…something like 100 screws for a buck and change. The 1.25" nylon ones have come in handy as well.
https://www.ebay.com/itm/2-56-Machine-S ... 2332950448
Focus: 2R O-Scale, SOU/SCL 1967-1972
Blog: http://davejfr0.blogspot.com/
Blog: http://davejfr0.blogspot.com/
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: Google [Bot] and 58 guests
