Korean Mfg. information--Follow UP
Korean Mfg. information--Follow UP
I'm looking for the email address for Sunjin Precision Models, Co. (Mr. Lee) if anyone has this info or a suggestion of where to go to get it. I have what I believe is there telephone number and street address off the internet, but there are two listing for the same company. Nothing for an email address and I need to contact them.
Thanks,
BH
Thanks,
BH
Last edited by up148 on Mon Feb 19, 2018 11:47 am, edited 1 time in total.
Re: Korean Mfg. information
Butch,
You might try asking on the Yahoo brasscollectors List.
You might try asking on the Yahoo brasscollectors List.
Re: Korean Mfg. information---Follow UP
Bringing this back up as I was never able to locate anyone, anywhere, who had contact information for Mr. Lee, which includes pulling in favors to get other importers to respond. I believe Mr. Lee is a ghost.
I needed to contact Mr. Lee to try and buy some replacement sand hatches for my Kohs 9000. They were missing when I purchased this model 2nd hand last year. I figured even if I failed at getting new hatches, I'd make them...it turns out that's what I had to do.
Luckily the PSC Big Boy and Challenger hatches were close in size and shape and fit the openings in the Kohs domes perfectly, so they were a great start. Had to thin they down, round them up a little and then taper the edges to duplicate the original hatches. Not perfect, but with a little finish sanding they will be quite satisfactory for this model. I have to straighten the grab handle and touch up the paint on the dome. The seller was an estate liquidator and didn't know what happened to this model and if he would have been a little more train savvy I'm sure the old hatches were around somewhere. But, it was a good buy so I'm happy.
I'm going to gut the antiquated electronics and install new wiring and DCC, so it's not like the new hatches compromised the pedigree of this model anyway. It is a remarkable model once you correct a few mistakes and replace the electronics.
BH
I needed to contact Mr. Lee to try and buy some replacement sand hatches for my Kohs 9000. They were missing when I purchased this model 2nd hand last year. I figured even if I failed at getting new hatches, I'd make them...it turns out that's what I had to do.
Luckily the PSC Big Boy and Challenger hatches were close in size and shape and fit the openings in the Kohs domes perfectly, so they were a great start. Had to thin they down, round them up a little and then taper the edges to duplicate the original hatches. Not perfect, but with a little finish sanding they will be quite satisfactory for this model. I have to straighten the grab handle and touch up the paint on the dome. The seller was an estate liquidator and didn't know what happened to this model and if he would have been a little more train savvy I'm sure the old hatches were around somewhere. But, it was a good buy so I'm happy.
I'm going to gut the antiquated electronics and install new wiring and DCC, so it's not like the new hatches compromised the pedigree of this model anyway. It is a remarkable model once you correct a few mistakes and replace the electronics.
BH
Re: Korean Mfg. information--Follow UP
Butch,
Looks pretty good to me. Get some paint on there and no one will ever know.
Got curious about SUNJIN and found this:
http://sjmodel.tradekorea.com/company.do
President is listed as: LEE, HYUN-MAN
Phone: +82-32-514-6330/1
address: 289, PUGAE-DONG, PUPYONG-GU, INCHON-CITY, 403-100 KOREA
Main Markets were USA and Japan
Under products, the only thing listed was: model train
There is a "CONTACT" bar on that website FWIW
Seems like that might be what you wanted?????
Seems a bit odd none of the other importers have any info.
Rich
Looks pretty good to me. Get some paint on there and no one will ever know.
Got curious about SUNJIN and found this:
http://sjmodel.tradekorea.com/company.do
President is listed as: LEE, HYUN-MAN
Phone: +82-32-514-6330/1
address: 289, PUGAE-DONG, PUPYONG-GU, INCHON-CITY, 403-100 KOREA
Main Markets were USA and Japan
Under products, the only thing listed was: model train
There is a "CONTACT" bar on that website FWIW
Seems like that might be what you wanted?????
Seems a bit odd none of the other importers have any info.
Rich
- Rufus T. Firefly
- Posts: 42227
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Korean Mfg. information--Follow UP
E7 wrote:Get some paint on there and no one will ever know.
Almost a certainty and had you not told anyone here, no one here would have known either.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: Korean Mfg. information--Follow UP
Rufus T. Firefly wrote:E7 wrote:Get some paint on there and no one will ever know.
Almost a certainty and had you not told anyone here, no one here would have known either.
But Rufus, I tell you everything!! You won't pass it around will you.
Thought about that aspect and at one time I would have remained silent. But today, I'm not looking to sell my models...just make them better....and once I gut and replace the stock electronics, it will be a b*stard anyway. Much better than stock, but a b*stard all the same. When I bought it I pretty much expected I'd be fabricating the hatches.
But, it was way more fun than I've had with my trains for many years.
BH
- Rufus T. Firefly
- Posts: 42227
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Korean Mfg. information--Follow UP
up148 wrote:Rufus T. Firefly wrote:E7 wrote:Get some paint on there and no one will ever know.
Almost a certainty and had you not told anyone here, no one here would have known either.
But Rufus, I tell you everything!! You won't pass it around will you.![]()
![]()
![]()
Wrote it all down on a bathroom stall wall on Rt. 95 in MD.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: Korean Mfg. information--Follow UP
Rufus T. Firefly wrote:Almost a certainty and had you not told anyone here, no one here would have known either.
There goes my TOP SECRET clearance!
Re: Korean Mfg. information--Follow UP
E7 wrote:Butch,
Looks pretty good to me. Get some paint on there and no one will ever know.
Got curious about SUNJIN and found this:
http://sjmodel.tradekorea.com/company.do
President is listed as: LEE, HYUN-MAN
Phone: +82-32-514-6330/1
address: 289, PUGAE-DONG, PUPYONG-GU, INCHON-CITY, 403-100 KOREA
Main Markets were USA and Japan
Under products, the only thing listed was: model train
There is a "CONTACT" bar on that website FWIW
Seems like that might be what you wanted?????
Seems a bit odd none of the other importers have any info.
Rich
You're good Rich. glad we're not competing for models.
I found that same info and tried calling the phone numbers, but they're all disconnected. I tried the contact bar, but you have to be a member of TradeKorean.com and "sign in" to send the message. Didn't want to do that as it sounded like a great way to have you information stolen or start getting bombarded with spam.
BH
Re: Korean Mfg. information--Follow UP
Butch,
My guess, and it is purely a guess based on the general information/rumor/innuendo that I see here and there on the Net, and reading everything I can on the subject of brass, is that the builder in question either moved on to another form of product, or did a disappearing act similar to Gang San (sp?) as described in one of Pecos John Smith's "Crappola from the Cupola" columns in an early issue of OST.
Rich
My guess, and it is purely a guess based on the general information/rumor/innuendo that I see here and there on the Net, and reading everything I can on the subject of brass, is that the builder in question either moved on to another form of product, or did a disappearing act similar to Gang San (sp?) as described in one of Pecos John Smith's "Crappola from the Cupola" columns in an early issue of OST.
Rich
Re: Korean Mfg. information--Follow UP
E7 wrote:Butch,
My guess, and it is purely a guess based on the general information/rumor/innuendo that I see here and there on the Net, and reading everything I can on the subject of brass, is that the builder in question either moved on to another form of product, or did a disappearing act similar to Gang San (sp?) as described in one of Pecos John Smith's "Crappola from the Cupola" columns in an early issue of OST.
Rich
Totally agree on your assumptions and I think maybe moving on to another product (like KTM did) is the correct answer. Or maybe working for European brass train importers only. Maybe Stephen knows?
BH
-
J. S. Bach
- Posts: 5820
- Joined: Wed May 16, 2007 9:30 pm
Re: Korean Mfg. information--Follow UP
Rufus T. Firefly wrote:[Wrote it all down on a bathroom stall wall on Rt. 95 in MD.
Maryland House or Chesapeake House?
- Rufus T. Firefly
- Posts: 42227
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Korean Mfg. information--Follow UP
J. S. Bach wrote:Rufus T. Firefly wrote:[Wrote it all down on a bathroom stall wall on Rt. 95 in MD.
Maryland House or Chesapeake House?
Only the Shadow knows,
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: Korean Mfg. information--Follow UP
Rufus T. Firefly wrote:J. S. Bach wrote:Rufus T. Firefly wrote:[Wrote it all down on a bathroom stall wall on Rt. 95 in MD.
Maryland House or Chesapeake House?
Only the Shadow knows,![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Started out "For a good time call........" didn't it???
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 51 guests