Working Headlights...do you bother?

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Working Headlights...do you bother?

Postby E7 » Fri Aug 18, 2017 2:04 pm

up148 wrote:+1 on lighting. I try to have the most accurate models possible, since I'm trying to recreate the prototype in miniature. That being said, I could give a hoot about smoke and will never have it. Just a rivet counting fool. :) :) :) BH


I am guessing that if having a headlight meant drilling a hole in a boiler where none was present, that would ixnay the light (which is my position).

I am with you regarding the smoke......not happening here either.

Rich

Robert
Posts: 1051
Joined: Sat Dec 11, 2010 3:00 pm

Re: Working Headlights...do you bother?

Postby Robert » Fri Aug 18, 2017 2:39 pm

It's interesting when I started this discussion, I didn't expect any commentary regarding lights on/off rules and what prototype did what and when.

I was simply curious about whether the assorted engine builders here bothered with installing operating headlights. I have done both install and not installed, and for what it's worth to me of late I am ok with skipping the feature. I gather from the discussion more of you prefer to have them.

Robert

Chris Rock
Posts: 1480
Joined: Fri Sep 23, 2005 6:08 pm
Location: United States

Re: Working Headlights...do you bother?

Postby Chris Rock » Fri Aug 18, 2017 3:07 pm

I sure think it is an interesting discussion.

I can't say why they would not light the lights and it could have been simply a holdover from earlier times. It may have just been the way they always did it.

I wasn't around anywhere close to that era, but I can say from talking to my parents about that time, being wasteful, or even the perception was very frowned upon. As kids we got grief all the time for many things we took for granted. My sympathetic mom would often jokingly accuse my dad of growing up in the depression era. They were born at the tail end of the depression but some of those depression traits were certainly passed along. It was an incredibly different world hearing the stories they tell.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Working Headlights...do you bother?

Postby bob turner » Fri Aug 18, 2017 6:30 pm

I get so far along and then go on to something else. You will find Diesels around here without handrails, passenger cars without window glazing, and steam without paint, let alone decals or headlights.

That said, a complete model probably should have a headlight, just like Lionel.

Robert
Posts: 1051
Joined: Sat Dec 11, 2010 3:00 pm

Re: Working Headlights...do you bother?

Postby Robert » Fri Aug 18, 2017 7:03 pm

bob turner wrote:I get so far along and then go on to something else. You will find Diesels around here without handrails, passenger cars without window glazing, and steam without paint, let alone decals or headlights.

That said, a complete model probably should have a headlight, just like Lionel.


Oddly enough that's exactly how I imaged you managed your hobby pursuits. Sounds normal. Made me smile.

Robert

User avatar
De Bruin
Posts: 992
Joined: Thu Jan 12, 2017 8:24 pm

Re: Working Headlights...do you bother?

Postby De Bruin » Sat Aug 19, 2017 1:37 am

Yeah Robert, I'm not surprised at BT's statement either; one of the things about a lot though certainly not all of Bob's pieces that sticks with me is how often after looking at one of those unfinished models, I'm going through the my own mental check list regarding things like handrails, decals(especially decals as that's my thing along with paint) and various other sundries that he admittedly has little interest in, but I get crazy over.
Of course one's liking of the decaling and painting processes likely plummets if you specialize in steam too, which I don't.
Regardless you can't argue with the output, Viva la difference.
Political Consultant- Tap into the hidden powers of your public office, insure your future is jail free, well funded. Visit shock and awe upon your adversaries, dominate the media, thrill your followers. contact morbo@happydaysrhereagain.com

Robert
Posts: 1051
Joined: Sat Dec 11, 2010 3:00 pm

Re: Working Headlights...do you bother?

Postby Robert » Sat Aug 19, 2017 9:41 am

De Bruin wrote:Yeah Robert, I'm not surprised at BT's statement either; one of the things about a lot though certainly not all of Bob's pieces that sticks with me is how often after looking at one of those unfinished models, I'm going through the my own mental check list regarding things like handrails, decals(especially decals as that's my thing along with paint) and various other sundries that he admittedly has little interest in, but I get crazy over.
Of course one's liking of the decaling and painting processes likely plummets if you specialize in steam too, which I don't.
Regardless you can't argue with the output, Viva la difference.


I often profess the worth of the "less is more" approach especially as applied to model railroading. Space and funds available to our particular hobby can be a limiting factor certainly. Knowing this can aid in directing ones plans, and potentially the collection of equipment.

Having said that, I have limited my equipment roster to what is a manageable and affordable count. This helps me direct my hobby hours to "the backlog" and things do get done. The difference in my approach, and what some others prefer is also reinforced by being a prototype modeler. With a specific road in mind, I limit purchases of motive power and the supporting supplies to what applies to my prototype goals.

I really do admire so many of the wonderful locomotive models...but chasing that segment of the hobby would all but eliminate my overall plans. I have to apply a discipline because without it much of what I enjoy in model railroading would stall out.

Robert

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Working Headlights...do you bother?

Postby bob turner » Sat Aug 19, 2017 2:58 pm

I do, of course, paint and decal. I even had special SP decals made for my Mikados. The thing is, I only work on stuff when I feel like it. That way I get max enjoyment. I do not have an overall plan. Shoot, I do not even have an overall plan for important stuff - except lesson plans (last box to fill is this fall - scheduled to teach Constitutional Law).

I need to show you my GG1s. They are the epitome of decaling. Sure - you can find missing handrails, but man - that Scalecoat and those gold stripes . . .

J. S. Bach
Posts: 5820
Joined: Wed May 16, 2007 9:30 pm

Re: Working Headlights...do you bother?

Postby J. S. Bach » Sat Aug 19, 2017 7:55 pm

bob turner wrote:I need to show you my GG1s. They are the epitome of decaling. Sure - you can find missing handrails, but man - that Scalecoat and those gold stripes . . .

A separate thread, I hope.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Working Headlights...do you bother?

Postby bob turner » Sat Aug 19, 2017 8:14 pm

Good idea. A PRR thread, or a GG1 thread?

User avatar
webenda
Posts: 15427
Joined: Sun Jan 09, 2005 4:05 pm
Location: Columbia

Re: Working Headlights...do you bother?

Postby webenda » Sat Aug 19, 2017 9:05 pm

Pentrex preview video for their "Railfanning Southern California in the 1950's."
https://www.youtube.com/watch?v=AS7bICcBcFE
Sometimes you see the headlight (or other front end lights) on and sometimes you don't.

I should not have watched that video... a sudden impulse to own a copy shot through me and ordered it, $29.95 + $6.00 shipping estimate.

WORKING HEADLIGHTS

My locomotives are Lionel three-rail and most come with working lights. Some of my less expensive locomotives came without lights, so I added them. Designing LED driver circuits is another hobby for me, I enjoy it.

Lionel's Army Turbine Switcher came without lights--I added two led lights.

DESIGN
Image

INTEGRATION
Image

TEST
Image
Image

Edit 1: Changed "Turbin" to "Turbine".
Edit 2: Changed "older" to "cheaper".
Last edited by webenda on Sun Aug 20, 2017 10:47 pm, edited 2 times in total.
----Wayne----

Back when I was growing up, if you didn't start someth'n, there wouldn't be noth'n.
--Merle Haggard

Tom Dempsey
Posts: 1002
Joined: Mon Dec 23, 2013 10:15 pm

Re: Working Headlights...do you bother?

Postby Tom Dempsey » Sat Aug 19, 2017 9:16 pm

I built and used your previous one, it works great although I need to heatsink the regulator. Why two regulators on this one?

User avatar
webenda
Posts: 15427
Joined: Sun Jan 09, 2005 4:05 pm
Location: Columbia

Re: Working Headlights...do you bother?

Postby webenda » Sat Aug 19, 2017 9:52 pm

Tom Dempsey wrote:Why two regulators on this one?


1) Circuit was originally used to test two LED's simultaneously for voltage and brightness when both were driven by the same current. The test required two identical drivers. It got repurposed for the Turbine Switcher.
2) Bob Nelson (Lionelsoni) said each LED needs its own driver because no two operate at the same voltage and the one with the lower voltage would hog all the current from a single driver.

The light in front is a White LED and has 3.6 volts across it when driven with 18 mA.
The light in the rear is a Red LED and has 2.0 volts across it when driven with 18 mA.
----Wayne----

Back when I was growing up, if you didn't start someth'n, there wouldn't be noth'n.
--Merle Haggard

Tom Dempsey
Posts: 1002
Joined: Mon Dec 23, 2013 10:15 pm

Re: Working Headlights...do you bother?

Postby Tom Dempsey » Sat Aug 19, 2017 10:07 pm

Okay, thanks Wayne

User avatar
De Bruin
Posts: 992
Joined: Thu Jan 12, 2017 8:24 pm

Re: Working Headlights...do you bother?

Postby De Bruin » Sun Aug 20, 2017 1:58 am

Neat power board Wayne!! good graphic too;
Thanks
Pete
Political Consultant- Tap into the hidden powers of your public office, insure your future is jail free, well funded. Visit shock and awe upon your adversaries, dominate the media, thrill your followers. contact morbo@happydaysrhereagain.com


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 38 guests