Walther 9175 Coach?

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
Seaboard Air Line Fan
Posts: 1308
Joined: Mon Mar 08, 2004 9:49 pm
Location: Virginia

Re: Walther 9175 Coach?

Postby Seaboard Air Line Fan » Wed Apr 05, 2017 6:32 pm

Anybody know how this thing goes together:

35kw generator.JPG
35kw generator.JPG (412.65 KiB) Viewed 6229 times


It's the Scale City designs/Keil Line 35kw generator, P/N 48-070.

No instructions from what I can find and I am clueless, literally :shock: :roll: :oops: :lol:

It might not be the correct one for my car, but I'd still like to know how to assemble it.
BobD aka Drifty

The Crow Flies At Midnight

User avatar
De Bruin
Posts: 992
Joined: Thu Jan 12, 2017 8:24 pm

Re: Walther 9175 Coach?

Postby De Bruin » Thu Apr 06, 2017 9:26 pm

You need a photo, but assuming you know which car end it goes on- pretty basic
the shaft end faces the truck. the guard, oval shaped with a base attaching to the car center girder, holds the shaft up if one of the u-joints fails, is mounted a scale foot or two off the clutch and is transected by the shaft, between the generator housing and differential on the truck(not included.) The truck end of the shaft ideally should hang between the inside wheel set, just inside the edge/line of it's wheel flanges.

some RPC psgr car books have a photo in the under body hardware section in the back. Photo helps.
Political Consultant- Tap into the hidden powers of your public office, insure your future is jail free, well funded. Visit shock and awe upon your adversaries, dominate the media, thrill your followers. contact morbo@happydaysrhereagain.com

Seaboard Air Line Fan
Posts: 1308
Joined: Mon Mar 08, 2004 9:49 pm
Location: Virginia

Re: Walther 9175 Coach?

Postby Seaboard Air Line Fan » Fri Apr 07, 2017 7:29 am

Thanks for the help! I'll look in the books I have to see if I can find a detailed photo. I have 2 diagram books showing SAL passenger cars, but don't recall seeing any photos of the undersides.
BobD aka Drifty

The Crow Flies At Midnight

User avatar
Rufus T. Firefly
Posts: 42229
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Walther 9175 Coach?

Postby Rufus T. Firefly » Fri Apr 07, 2017 8:23 am

Seaboard Air Line Fan wrote:Anybody know how this thing goes together....


You put the lime in the coconut and drink them both together!
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

rilynes
Posts: 28
Joined: Sun Nov 22, 2015 4:52 pm

Re: Walther 9175 Coach?

Postby rilynes » Fri Apr 07, 2017 11:26 am

Rufus T. Firefly wrote:
Seaboard Air Line Fan wrote:Anybody know how this thing goes together....


You put the lime in the coconut and drink them both together!


Wow, an instant 50-year flash-back thanks to Dr. Firefly's Wayback Machine :D

Seaboard Air Line Fan
Posts: 1308
Joined: Mon Mar 08, 2004 9:49 pm
Location: Virginia

Re: Walther 9175 Coach?

Postby Seaboard Air Line Fan » Fri Apr 07, 2017 11:49 am

rilynes wrote:
Rufus T. Firefly wrote:
Seaboard Air Line Fan wrote:Anybody know how this thing goes together....


You put the lime in the coconut and drink them both together!


Wow, an instant 50-year flash-back thanks to Dr. Firefly's Wayback Machine :D


Dang, and I was saving that for the lounge car :D
BobD aka Drifty

The Crow Flies At Midnight

aterry11
Posts: 663
Joined: Sat Feb 23, 2013 12:20 pm
Location: Omaha Ne

Re: Walther 9175 Coach?

Postby aterry11 » Mon Apr 10, 2017 12:19 am

This is my application of the same on a cascade 10,5. I didn't use the channel as I scratch built the floor .and used a wood center channel that fit the safety hoop and the generator mount.
I don't know for sure but on pics I researched I found the hoops on the Pullmans and the u with mount plate on the Budds second pic is a larger generator cause a dome needs lots a juice for AC. Again I used a center channel from North western scale supply. I am uncertain they still make this part now it comes without the center routed out.
Attachments
fenders and generators 018.JPG
fenders and generators 018.JPG (419.19 KiB) Viewed 6133 times
fenders and generators 019.JPG
fenders and generators 019.JPG (425.47 KiB) Viewed 6133 times

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Walther 9175 Coach?

Postby bob turner » Mon Apr 10, 2017 1:26 am

That is some seriously good work. Beautiful finish on the PRR, and impressive investment in trucks.

aterry11
Posts: 663
Joined: Sat Feb 23, 2013 12:20 pm
Location: Omaha Ne

Re: Walther 9175 Coach?

Postby aterry11 » Mon Apr 10, 2017 8:37 am

Thanks to you Bob!!
Never would have believed Future would look soo good :wink: :wink: :wink: :wink: :wink:

Wised I could find some more of the trucks, they roll so well you can check level with them. I have several sets of the Kemtron equivalent and they are missing the end beams . Any of youse Bobs got any stashed in your closets? :?: :?: :?: :?: :?: :?: :?: :?:

User avatar
Rufus T. Firefly
Posts: 42229
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Walther 9175 Coach?

Postby Rufus T. Firefly » Mon Apr 10, 2017 9:00 am

aterry11 wrote:..........and they are missing the end beams.


Make an RTV mold of one and cast as many as you need from resin or cerrobend. :wink:
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

Seaboard Air Line Fan
Posts: 1308
Joined: Mon Mar 08, 2004 9:49 pm
Location: Virginia

Re: Walther 9175 Coach?

Postby Seaboard Air Line Fan » Mon Apr 10, 2017 2:20 pm

aterry11 wrote:This is my application of the same on a cascade 10,5. I didn't use the channel as I scratch built the floor .and used a wood center channel that fit the safety hoop and the generator mount.
I don't know for sure but on pics I researched I found the hoops on the Pullmans and the u with mount plate on the Budds second pic is a larger generator cause a dome needs lots a juice for AC. Again I used a center channel from North western scale supply. I am uncertain they still make this part now it comes without the center routed out.


Thanks, just what I needed!!!
BobD aka Drifty

The Crow Flies At Midnight

Seaboard Air Line Fan
Posts: 1308
Joined: Mon Mar 08, 2004 9:49 pm
Location: Virginia

Re: Walther 9175 Coach?

Postby Seaboard Air Line Fan » Wed Apr 26, 2017 9:40 am

Well I'm down to putting the window glazing in, paint is done.

I've used that RC canopy glue a couple of times, but it takes soooo long to dry. I've used Scotch Magic Tape too, but with the sides glued in place as well as seating, either method will have to be done with nimble fingers.

Any other recommendations???

(nimble-less from P-town)
BobD aka Drifty

The Crow Flies At Midnight

User avatar
Rufus T. Firefly
Posts: 42229
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Walther 9175 Coach?

Postby Rufus T. Firefly » Wed Apr 26, 2017 9:56 am

Seaboard Air Line Fan wrote:Any other recommendations???


How to, what to use, or what to secure it with?
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

Seaboard Air Line Fan
Posts: 1308
Joined: Mon Mar 08, 2004 9:49 pm
Location: Virginia

Re: Walther 9175 Coach?

Postby Seaboard Air Line Fan » Wed Apr 26, 2017 11:18 am

I pick what to use.
BobD aka Drifty

The Crow Flies At Midnight

User avatar
Rufus T. Firefly
Posts: 42229
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Walther 9175 Coach?

Postby Rufus T. Firefly » Wed Apr 26, 2017 11:28 am

Seaboard Air Line Fan wrote:I pick what to use.


Ok, and that is what?
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 41 guests