This one merits 3 "RARES".....!
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: This one merits 3 "RARES".....!
This is Ray Waller, and probably one of the finest O Scale models I have ever laid eyes on. Some of the parts are now available from Stevenson Preservation Lines.
Re: This one merits 3 "RARES".....!
I know diddly squat about SF Hudsons as my interests are East of the Mississippi, but I'm guessing the price will kill that one, rare or not. There have been goodly number of Hudsons done, so how tough to bash one to a SF? I've always thought the hudson had a nice symmetry, but I don't own one.
Re: This one merits 3 "RARES".....!
Did that locomotive come detailed like that from Ray Waller? About what time period was that? The detailing is just phenomenal and it's really a super looking locomotive. Love that long SP tender too.
BH
BH
Re: This one merits 3 "RARES".....!
Other than the lack of brake hangers the model looks terrific, a friend of mine once had a Waller NYC H10B and comparing it with the then available KTM version it looked real good. Ray appears to have built a fairly large number of engines with relatively little public exposure, occasional credits with pics in the RR mags over the years. As with all custom builders the level of detail beyond their standard model was up to the customers budget. Some one out there must be more familiar with Rays work and history.
Re: This one merits 3 "RARES".....!
[quote="hibar"]Other than the lack of brake hangers the model looks terrific
Sounds like a Turner to me

Sounds like a Turner to me
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: This one merits 3 "RARES".....!
Just because I do not generally add them does not mean I don't know how. My #3 scratchbuilt has scratchbuilt brake beams and shoes on all but the back of the rear driver set on each engine. Bakelite, with metal shoes, but no rigging underneath.
I bought Mike #3236 from Harold Peters - it came with full brake rigging and all those cross-ties underneath held with 00-90 hex heads. Beautiful model; wouldn't run.
John Dill used to bring models to my test track and ask why they wouldn't run. Usually lots and lots of problems, but always the first thing was to remove the brake beams.
We even had an MTH factory model with shorted brake beams. So unless they are plastic ( or Bakelite) I leave them off. Easy to add later, and if you get one of my models, look for 0-80 tapped holes for the tops of brake beams.
My personal hangups include slotted boiler bellies and drive shafts or gear boxes that show. I am quite secure in the knowledge that I can add brake beams any time I want.
I bought Mike #3236 from Harold Peters - it came with full brake rigging and all those cross-ties underneath held with 00-90 hex heads. Beautiful model; wouldn't run.
John Dill used to bring models to my test track and ask why they wouldn't run. Usually lots and lots of problems, but always the first thing was to remove the brake beams.
We even had an MTH factory model with shorted brake beams. So unless they are plastic ( or Bakelite) I leave them off. Easy to add later, and if you get one of my models, look for 0-80 tapped holes for the tops of brake beams.
My personal hangups include slotted boiler bellies and drive shafts or gear boxes that show. I am quite secure in the knowledge that I can add brake beams any time I want.
Re: This one merits 3 "RARES".....!
bob turner wrote:My personal hangups include slotted boiler bellies and drive shafts or gear boxes that show. I am quite secure in the knowledge that I can add brake beams any time I want.
Couldn't resist kidding you because you are so adamant about NOT having them because of shorts!
Re: This one merits 3 "RARES".....!
Obviously, from posts above, this loco is typical of a Ray Waller build. But, I would still like to know what time period Ray was building these models, as this model looks to be very advanced on detailing compared to stock MG or USH locos that I've owned. A really, really nice loco. Everything is straight and plumb and lots to look at.
BH
BH
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: This one merits 3 "RARES".....!
Cannot tell you more than he was a contemporary of Al Ellis, and had a hand in the development of the Lobaugh "Lost Wax" Mike. See those trailing truck castings? You can buy them today from Stevenson. He shipped me a set in January!
Re: This one merits 3 "RARES".....!
Thanks Bob, that's exactly what I was looking for. Ray was way ahead of his time IMHO. Most scratch built loco's I've seen from the 40's and 50's didn't reach this level of fit and finish. Many had oversize or limited details I guess because they didn't exist commercially. It's the most impressive scratch built model I've seen from this period. And it is in fantastic condition being that old.
BH
BH
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: This one merits 3 "RARES".....!
Anybody notice this "rare"model?
http://www.ebay.com/itm/Lobaugh-SP-Sout ... SwCU1Y4Zbk
It is not Lobaugh, and probably a one-of-a-kind, therefore rare.
http://www.ebay.com/itm/Lobaugh-SP-Sout ... SwCU1Y4Zbk
It is not Lobaugh, and probably a one-of-a-kind, therefore rare.
Re: This one merits 3 "RARES".....!
I believe that may be the new KEY.
Don't shoot me Dave.
BH
BH
Re: This one merits 3 "RARES".....!
If you do a search in All Categories on Ebay for rare, you get 25 million hits. Too bad you can't discriminate and pick out "actually" rare.
Re: This one merits 3 "RARES".....!
up148 wrote:I believe that may be the new KEY.![]()
![]()
![]()
Don't shoot me Dave.
BH
Better snap that one up Butch, it's about a 6 grand discount!
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 30 guests