Union Pacific Monster type 4-12-2

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Union Pacific Monster type 4-12-2

Postby E7 » Thu Jan 17, 2019 8:01 am

Jay Criswell wrote:Oops! Blind, apparently, just like me. Guessing you knew what I meant. Auto-correct doesn't always work. Jay


Unfortunately it did work, because "blond" is indeed a legitimate word!

Rich

PS: When I think about blind drivers, the PRR Decapods come to mind, originally having 3 of 5 blind. Whoever came up with that must have been blond! :mrgreen: :lol: :lol: :lol: :lol:

up148
Posts: 4796
Joined: Sat Nov 01, 2008 11:52 am

Re: Union Pacific Monster type 4-12-2

Postby up148 » Thu Jan 17, 2019 8:22 am

Jay Criswell wrote:Oops! Blind, apparently, just like me. Guessing you knew what I meant. Auto-correct doesn't always work.

Back to the subject at hand, the original drawing showed one blind driver but Alco came up with a design that provided quite a bit of lateral movement of the drivers and it was determined all drivers would be flanged. True? Can't swear to it but it sounds right.

Jay



Correct you are to my knowledge! The UP had to modify the radius of many curves to accommodate this beast and the required radius is one reason it was operated in very specific areas on their route. It was a freight hauling brute, used mostly in NE, WY, just like the later Big Boys and Turbines. I believe in later years it was also used in KS.

BH

86TA355SR
Posts: 124
Joined: Mon Feb 08, 2016 10:52 pm

Re: Union Pacific Monster type 4-12-2

Postby 86TA355SR » Thu Jan 17, 2019 12:25 pm

Bob,

Beautiful work, you always impress me with your abilities.

Some day I hope to make a 'Bald Face' 9000, would love to have one in my collection.

Looking forward to seeing more of this wonderful build.

Aaron

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Union Pacific Monster type 4-12-2

Postby bob turner » Thu Jan 17, 2019 2:51 pm

For completeness, here is the footnote:

Page 141 of Kratville Vol 1 - 9000 was delivered with # 3 and 4 blind, against the wishes of UP and Mr. Fetters. After the test period, all drivers were flanged.

Page198 - the next fourteen were delivered with all flanged drivers,

Side note - the nude face locomotive got double Walschaert gear, like the Baldwin 60000. Not one I would model,but intriguing. I did not research if there was more than one so converted.

Today we do check valves, front end throttle, and maybe piping under RS running board. Maybe.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Union Pacific Monster type 4-12-2

Postby bob turner » Tue Jan 22, 2019 3:21 pm

Latest portrait: Still a few things to go - and maybe a lot of work on those air pumps.

4-12-2 Portrait 2.JPG
4-12-2 Portrait 2.JPG (1.16 MiB) Viewed 5092 times

User avatar
rex desilets
Posts: 1786
Joined: Sun Jul 15, 2007 2:18 pm

Re: Union Pacific Monster type 4-12-2

Postby rex desilets » Tue Jan 22, 2019 4:00 pm

You do nice work :D
“Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.” – John Adams

86TA355SR
Posts: 124
Joined: Mon Feb 08, 2016 10:52 pm

Re: Union Pacific Monster type 4-12-2

Postby 86TA355SR » Tue Jan 22, 2019 4:00 pm

Bob,

I'm curious-do you make the detail parts such as the piping, air pumps, number boards or do they come from the spare parts box, perhaps PSC?

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Union Pacific Monster type 4-12-2

Postby bob turner » Tue Jan 22, 2019 8:34 pm

Depends. On this one tanks, pipes, number boards all made here. Side rods from my patterns.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Union Pacific Monster type 4-12-2

Postby bob turner » Mon Jan 28, 2019 1:47 pm

Getting there. Just ordered screen for the ash pan cinder catchers. I will add ash pan mounts, boiler steps, and a couple handrails tonight. The tender got a coal pile and rear ladders last week. It needs some pipes and tool kits, and probably last, those pesky upper deck handrails.

Starting to think this one will be nice enough to fake some piping on those air pumps. I need to pull the die cast pumps and bolt on some brass ones. That will be February or March, I bet. Unless I hop on the B&O P1 Pacific first. It too deserves to be finished.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Union Pacific Monster type 4-12-2

Postby bob turner » Thu Jan 31, 2019 1:58 pm

80 mesh screen is too fine. I note that this is a trial run; the uprights will be uniform and properly spaced when I get the correct mesh screen.

004C43C4-ED59-4CC1-9E6A-0BF2C76AECEB.jpeg
004C43C4-ED59-4CC1-9E6A-0BF2C76AECEB.jpeg (816.48 KiB) Viewed 4961 times


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 42 guests