"We don't need no stinkin' prototypes......"

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: "We don't need no stinkin' prototypes......"

Postby bob turner » Thu Mar 24, 2022 1:39 am

Don't mis-understand me - I am absolutely jealous of the stunning detail only available in plastic injection molding. Those of us who are metal freaks cannot have that detail. And once in a while I succumb - I have three K-Line plastic Train Masters. I may yet send you my plastic AHM and Atlas box/cow cars. And at one point I had the IHB steamer - what a beauty! Way better in detail than the USH.

And that Lionel PA - don't get me started. Way better than any other O Scale PA I have studied - and I studied the earlier Key models. Beats Overland hands-down.

I disagree with Martin - it is seriously important to state that appreciation of such things is way more opinion than fact.

User avatar
sarge
Posts: 5138
Joined: Thu Apr 02, 2009 2:21 pm
Location: Dungfield Manor

Re: "We don't need no stinkin' prototypes......"

Postby sarge » Thu Mar 24, 2022 5:58 am

They did come out a treat, Pete! Thanks for the kind words, but you did the work so all credit is yours.

I'll always appreciate all materials that work, and do my best in each. I'll yellowsmith gladly, and love working in brass; Rufus' go-to of wood is fun, paper and card, even white-metals (a Variac for your soldering gear and using Cerrobend for solder).

I love styrene and its workability. You can machine it (a couple old Unimats here see styrene more often than brass), the cast-in details can be mind-boggling, its permanency rivals anything if you think about it. I must admit those old Weaver chaindrive units are a kitbasher's and detailer's staple, as are the Atlas SWs.

The next materials to master, and I'm learning my way around them, are the 3D printing mediums. The future of detail parts, conversions, complete models in unlimited possibilities, would seem to lie there. The next source of cheap labour after the Chinese is cyber.

I'm not much of a futurist, indeed as much a trog as the next old man, but still...

User avatar
Rufus T. Firefly
Posts: 42236
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: "We don't need no stinkin' prototypes......"

Postby Rufus T. Firefly » Thu Mar 24, 2022 8:23 am

.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
De Bruin
Posts: 992
Joined: Thu Jan 12, 2017 8:24 pm

Re: "We don't need no stinkin' prototypes......"

Postby De Bruin » Tue Apr 22, 2025 5:39 pm

Approximately three years later, here's some more " South of the Border" to ruminate on.
Was able to attend the Chicago meet this year and wisely “kept my powder dry” until I had seen all the tables, as I found this unusual model on one of the last rows.
Image
An FCP API620, the product of an RSD-5 rebuild program at the Empalme Shops in the 1970’s. They were distinctive looking with a C424-like short nose, and boxy long hood housing a 251 engine replacing the original 244.
Image
You’ll note that the bug boards carry a train number rather than the unit number, as the Ferrocaril del Pacifico was acquired by the Mexican government from the SP in 1951 and interestingly their operating rules and practices were largely maintained on the route up until the 1990’s.
Image
According to the seller it was bashed out of Kemtron parts with a KTM/CLW style drive by a chiropractor residing in Las Vegas who had an affinity for Kemtron Alco kits and Mexican Railroads. Would've liked to meet that guy!
Image
Runs very smoothly albeit has a lot of weight, I will have to get into it though to install headlights and a harness. On the other hand the MTA-like blue and yellow FCP scheme on this is largely accurately done albeit the “noodle” herald was hand painted. I’ll keep it as-is, though these also looked very cool in the FCP’s subsequent SP style grey and scarlet paint as well. I’ll save that for a pair of RSD-12’s in the queue.
Political Consultant- Tap into the hidden powers of your public office, insure your future is jail free, well funded. Visit shock and awe upon your adversaries, dominate the media, thrill your followers. contact morbo@happydaysrhereagain.com

User avatar
R.K. Maroon
Posts: 3141
Joined: Tue Feb 22, 2011 9:20 pm

Re: "We don't need no stinkin' prototypes......"

Postby R.K. Maroon » Tue Apr 22, 2025 10:23 pm

I admire anybody willing to take on a project like that. You wonder what else might have been on his roster.

The drive setup is unusual. I don't think I have ever seen the combination of CLW axle gearboxes with a center-tower drive. Having said that, if the original drive was US Hobbies, then it would have used those problematic axle gearboxes that were prone to gear splits. Perhaps there are more of these setups out there than I might have thought.

NIce find, Pete -- and right up your alley of interests too.
The link below any photo will display the image full size

User avatar
De Bruin
Posts: 992
Joined: Thu Jan 12, 2017 8:24 pm

Re: "We don't need no stinkin' prototypes......"

Postby De Bruin » Fri Apr 25, 2025 12:23 am

Thanks Jim, serendipitous indeed. :D
Image
Since, like Maroon, I’ve evolved to compulsively doing a matching tail car for whatever motive power’s made it to finished/rtr, I went with this virgin/unpainted KTM/MG UP CA-4 car body sans-trucks that I bought from my buddy Craig Smith at last year’s O-Scale SW to replace that under-scale bashed Kusan hack seen at the beginning of this string ( *sniff* a compatriot having justly disparaged its size 8^)
Image
Given I didn’t want an ersatz Lionel Bay Window or an ex-SP woody this CA-4 drew the short straw despite its resemblance to FCP’s version being superficial at best. I did plate up the car ends and WC window to get close but otherwise no additional surgery to correct the coop windows or the spacing with the prototypes side windows, rivet strips etc. oh well.....
Image
Trucks though were an issue; the prototype had excruciatingly short Commonwealths that even the old school Walthers were too long for. Sooo.. since some of these eventually got a version of this RB-style w/leafs (here from Atlas PRC) that’s what it’ll ride on for now. Sarge tells me those shrimpy Commonwealths can be had so I’ll be looking for them. Paint is SC UP Yellow, SP Scarlet and Ace rattle can Flat Black over Rustoleum Premium Auto Gray Primer. Decals are an amalgam of MS HO scale TOFC set for the FCP noodles, an MS Gothic set for the road letters and numbers and an ancient Walthers NdM XM set for the car data in Spanish.
(Viva' Walthers eh?)

Otherwise kind of DT&I looking.
Political Consultant- Tap into the hidden powers of your public office, insure your future is jail free, well funded. Visit shock and awe upon your adversaries, dominate the media, thrill your followers. contact morbo@happydaysrhereagain.com


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: Bing [Bot], bob turner, Chris Webster and 49 guests