An expensive doorstop??!!
-
Jay Criswell
- Posts: 2004
- Joined: Thu Mar 06, 2008 12:38 pm
Re: An expensive doorstop??!!
Good for you. You keep'em! I won't allow them on the property.
-
Carey Williams
- Posts: 690
- Joined: Sat Dec 24, 2016 3:10 pm
Re: An expensive doorstop??!!
Hello O scale world ..
..vehicles have to be pragmatic in my world ..mini van or full size thank you..but you all can enjoy your second or third round at the teenage years.
The overly optimistically priced seller .... at one time would up load a whole auction on Liveauctioneer or Invaulable ....and a very small number of pieces would receive an opening bid due to high opening bids ... but there have been a few pieces in the in his pre "ebay days" ..that I felt were fairly priced ... 2 railed and modified Lionel Hiawatha and City of Portland ... $200 each so I was happy ... his current pricing has no basis in reality... or even close ...
In the toy/model train world, two or three separate orbits exist ..in the tin plate world thousands of dollars can buy you a "rare" plastic 6464 box car ... in the very fine high end of the scale world the rarefied air crowd spend lots of $$$$ for detail, drive and paint jobs ..... and in the vintage O scale world is prefect for the "value minded" ( bottom feeders) ...... so you find a tinplater with a scale piece he assumes it has to be worth a fortune because he has never seen it before and in his world 1000 is chump change for some odd plastic car with a weird # or variation of color hue...
I've found the best place to find true value on old O scale is at O scale meets ....where prices are far more reasonable among other "like" minded folks.
Buy what you like and like what you buy
Cheers Carey
..vehicles have to be pragmatic in my world ..mini van or full size thank you..but you all can enjoy your second or third round at the teenage years.
The overly optimistically priced seller .... at one time would up load a whole auction on Liveauctioneer or Invaulable ....and a very small number of pieces would receive an opening bid due to high opening bids ... but there have been a few pieces in the in his pre "ebay days" ..that I felt were fairly priced ... 2 railed and modified Lionel Hiawatha and City of Portland ... $200 each so I was happy ... his current pricing has no basis in reality... or even close ...
In the toy/model train world, two or three separate orbits exist ..in the tin plate world thousands of dollars can buy you a "rare" plastic 6464 box car ... in the very fine high end of the scale world the rarefied air crowd spend lots of $$$$ for detail, drive and paint jobs ..... and in the vintage O scale world is prefect for the "value minded" ( bottom feeders) ...... so you find a tinplater with a scale piece he assumes it has to be worth a fortune because he has never seen it before and in his world 1000 is chump change for some odd plastic car with a weird # or variation of color hue...
I've found the best place to find true value on old O scale is at O scale meets ....where prices are far more reasonable among other "like" minded folks.
Buy what you like and like what you buy
Cheers Carey
Re: An expensive doorstop??!!
bob turner wrote:Not buying "really good" models of any type. I did buy a PSC cab forward a quarter century ago, but it was way too delicate, so traded for a couple USH models. I thought the Sunset Es were in the $500 range - maybe I am in error? And I think I have seen Overland Es going for just over six.
I can't say for certain what the earlier runs were, but they are asking $699.95 + $45 ship. FOR NEW E7s I think they have been right about that price all along. They have E8 A's on sale? for $699.95. I don't know exactly when it happened but they got the headlight correct on their E8s (slightly tilted back toward the windshield at the top. Those models look as good as any plastic model I have seen, but it took them a while to get there. Considering the amount of material available on the prototype, that shouldn't be. Their first adds had NYC E's with passenger pilots with coupler doors. Do they not look at their own advertising?
On every Overland O scale EMD diesel I have ever seen the upper or single headlight was TOO large in diameter. Hard to fix that. I suspect the EMD nose has been abused more than any other diseasel. Overland did some great stuff, but it wasn't their O scale EMD covered wagons.
Better get some glasses!bob turner wrote:I charge $50/hr for model work. That keeps my backlog at zero, which is exactly where I want it. And these next E7s will have probably ten hours in pattern prep, $25 per side for new castings, and assembly ten hours, not counting painting and power.
But it is a hobby, and hobbies are supposed to make leisure time enjoyable, not profitable. I do have the TV on while drilling and tapping, so I get to watch history being made as I burn up my leisure time.
A Chevelle for sixty grand? I always thought my Mustang convertibles were better looking cars.
Re: An expensive doorstop??!!
Jay Criswell wrote:I'd take the Chevelle over an ugly Mustang!
Jay
I'll second that!
Rich
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: An expensive doorstop??!!
Obviously, individual taste is part of the Chevelle/Mustang discussion. Either, in my opinion, is light-years away from the uniformly hideous (opinion, remember?) stuff rolling out of Japan, Korea, Germany, and Yugoslavia, or whatever it is called this week. And while I really like my '64 Mustang, it will be a very long time before a recent Ford/Mazda product ever again is allowed on my property. What awful engineering!
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: An expensive doorstop??!!
Back to the E7 - I personally am happy with the $50 variety, bad headlight, windshield, and pilot notwithstanding. The challenge is to make the sides more realistic. I would go $600 for a die cast or brass E7 that looked as good as Sunset, but I kind of get a kick out of rolling my own, so I am pleased that noone has offered such a product.
But what has happened in O Scale is that everything - everything - I have always lusted for in trains is now either available or has been fabricated in my shop. I remember wanting Budd passenger cars, then along came Haynes MacDaniel, and then K-Line, and then Sunset.
The last thing on my list is a Bi-Polar and a Skytop lounge. Both either exist or soon will, in a form I like. The Skytop will cost roughly about one month's avgas bill, if I have to buy the whole set. Maybe I will do that and sell off the coaches.
But what has happened in O Scale is that everything - everything - I have always lusted for in trains is now either available or has been fabricated in my shop. I remember wanting Budd passenger cars, then along came Haynes MacDaniel, and then K-Line, and then Sunset.
The last thing on my list is a Bi-Polar and a Skytop lounge. Both either exist or soon will, in a form I like. The Skytop will cost roughly about one month's avgas bill, if I have to buy the whole set. Maybe I will do that and sell off the coaches.
- ScaleCraft
- Posts: 6693
- Joined: Thu Jan 26, 2012 10:15 pm
Re: An expensive doorstop??!!
just remember....the chevelle was made 64 to 77...as in dead marque....Mustangs still being made....don't know....seems to be survival of the fittest.
O;' Henry made some mistakes...all centered around shotguns...as in he didn't shoot Louis Chevrolet, the Dodge Brothers, William "Crapo" Durant, Walter P. Chrysler...when he fired them.
O;' Henry made some mistakes...all centered around shotguns...as in he didn't shoot Louis Chevrolet, the Dodge Brothers, William "Crapo" Durant, Walter P. Chrysler...when he fired them.
Dave....gone by invitation
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: An expensive doorstop??!!
I like the Chevelle, and its Pontiac equivalent. It's just that I like the 1965 Mustang better. It closely resembles some drawings I made in the early 1950s of a car I wanted. Difference - no side scoop and bubble canopies. I think the Ford and Chevy were pretty much equivalents from about 1955 thru maybe 1970.
Again, though, beauty is in the eye of the beholder. I personally think every rail locomotive past the E9 and the SD24 are butt ugly, along with the modern freight cars that follow them. I know folks who think Cab Forward steam was atrocious!
Again, though, beauty is in the eye of the beholder. I personally think every rail locomotive past the E9 and the SD24 are butt ugly, along with the modern freight cars that follow them. I know folks who think Cab Forward steam was atrocious!
Re: An expensive doorstop??!!
The way things are headed in the automotive world, they are never going to make anything (at least that I can afford) that I would be remotely interested in buying. I think the goal is to get everyone (and some should be there) into a Tesla or the like. They can shove those things up their anus. If I meet my demise in a traffic accident, it will be by my own doing.
As for Locomotives, most have succumbed to the form follows function syndrome, and for the most part they are BORING. My interest pretty much stops at first generation diseasels, although there are a couple that I find interesting (Trainmaster, BL2, and maybe the first couple of Geeps (7 & 9). All of the newer freight engines are BORING. There have been a couple of the passenger engines that have at least a little bit of style: P42/AMD 103 and a couple others that I can't come up with the alphabet soup for!
As for Locomotives, most have succumbed to the form follows function syndrome, and for the most part they are BORING. My interest pretty much stops at first generation diseasels, although there are a couple that I find interesting (Trainmaster, BL2, and maybe the first couple of Geeps (7 & 9). All of the newer freight engines are BORING. There have been a couple of the passenger engines that have at least a little bit of style: P42/AMD 103 and a couple others that I can't come up with the alphabet soup for!
Last edited by E7 on Sat Feb 16, 2019 10:26 pm, edited 1 time in total.
-
herronpeter
- Posts: 748
- Joined: Mon Jul 28, 2014 9:13 pm
- Location: Clifton Park, NY
Re: An expensive doorstop??!!
Hey Bob, you could always sell the plane and buy them all!!! LOL...........
Peter
Peter
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 44 guests