Too Quiet so let's get some opinions

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
Rufus T. Firefly
Posts: 42236
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Too Quiet so let's get some opinions

Postby Rufus T. Firefly » Wed May 17, 2017 7:19 pm

cole7015 wrote:Hope fully none of them will come to O Sale West next week.


I understand that they are planning on attending and will be driving in non-stop from the East coast in a caravan of VW minibuses.......and there was something about gathering at the Delta products table.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

Seaboard Air Line Fan
Posts: 1308
Joined: Mon Mar 08, 2004 9:49 pm
Location: Virginia

Re: Too Quiet so let's get some opinions

Postby Seaboard Air Line Fan » Wed May 17, 2017 7:21 pm

When 3rd Rail was looking for input for their E7 I sent them lots of data on the Seaboard units.

Most if not all of the SAL engines had filters in place of the rear window opening:

SAL3106NOTES.jpg
SAL3106NOTES.jpg (83.66 KiB) Viewed 7092 times


They also had an angled step on the fireman's side:

3030-4.jpg
3030-4.jpg (1.3 MiB) Viewed 7092 times


Neither got applied. I even asked for #3030 but got #3029:

E7A6.JPG
E7A6.JPG (470.86 KiB) Viewed 7092 times


I was so happy to get ANYTHING in SAL paint...I didn't care :D I can fix most if not all the things if I want, although not too sure about the filter in place of the window (the housing is different).

Jonathan Peiffer explained that the mold had to be made for the most likely unit produced, makes sense to me.
BobD aka Drifty

The Crow Flies At Midnight

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Too Quiet so let's get some opinions

Postby bob turner » Wed May 17, 2017 7:30 pm

While I agree with Jay, the Bultmann model was flawed - wrong track gauge. Other than that, probably as close as we will ever see. I think it was $3500 or so.

The thing about whining - fortunately, nobody forces us to read this stuff. Since I have zero interest past the E-7, I had not followed these threads, and am now doing so to see who is whining about what. Beats cleaning the garage, which is on the agenda.

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Too Quiet so let's get some opinions

Postby E7 » Wed May 17, 2017 8:14 pm

up148 wrote:What mistakes? Since there have been mistakes (some huge) on many of the recent diesel offerings, I don't think it makes much difference. Complainers mostly 2R and 3RS and supporters mostly 3R or just 3rd Rail groupie minions. I was concentrating on the comment, that paraphrased, sounds like

"quit pointing out mistakes to those too stupid to notice or everyone will be up in arms".

Just sounded like a strange comment to make to defend yourself or product. BH


More than strange, that comment is TOTALLY self serving. If you don't want people busting your *ss about mistakes don't make them, if you do, they're yours, own them. Really lame!

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Too Quiet so let's get some opinions

Postby E7 » Wed May 17, 2017 8:32 pm

sarge wrote:Scott makes his call as to where his business focus might be; the money apparently is with the latter pair in Scott's view.


The name "3RD Rail" trumpets that.

User avatar
big bad jim
Posts: 446
Joined: Wed Oct 06, 2010 1:38 pm

Re: Too Quiet so let's get some opinions

Postby big bad jim » Wed May 17, 2017 8:49 pm

bob turner wrote:Note that there are no Proto-48 modelers complaining about small errors above the belt line.
Not ignoring the other factors, but this one is simply because Scott won't offer anything in p48.

bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Too Quiet so let's get some opinions

Postby bob turner » Wed May 17, 2017 9:02 pm

No - my point was (and I am perhaps in error) that 3 rail scale folks are a lot pickier about accuracy above the wheelsets than are 2-railers of any stripe. If a Proto-48er wanted an inexpensive E-8, I bet the Sunset would be a first choice for conversion. We would not hear much about a few grabirons. Opinion, obviously. That is in the thread heading.

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Too Quiet so let's get some opinions

Postby E7 » Wed May 17, 2017 9:10 pm

bob turner wrote:While I agree with Jay, the Bultmann model was flawed - wrong track gauge. Other than that, probably as close as we will ever see. I think it was $3500 or so.


It was purposely built that way, so you can't rightly call it flawed.

User avatar
big bad jim
Posts: 446
Joined: Wed Oct 06, 2010 1:38 pm

Re: Too Quiet so let's get some opinions

Postby big bad jim » Wed May 17, 2017 9:16 pm

Fair enough about the p48 angle.
Last edited by big bad jim on Wed May 17, 2017 10:11 pm, edited 1 time in total.

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Too Quiet so let's get some opinions

Postby E7 » Wed May 17, 2017 9:17 pm

bob turner wrote: If a Proto-48er wanted an inexpensive E-8, I bet the Sunset would be a first choice for conversion.


Some of folks on the OGR thread talked about paying 2K for their engines. That's a lot of avgas!!! oinion

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Too Quiet so let's get some opinions

Postby E7 » Wed May 17, 2017 9:30 pm

Maybe I missed it, but I was surprised there was not more complaining/backlash about a large number of the 3rd Rail E7's having incorrect pilots That's a prominent feature to be wrong and there are tons of photos out there showing the correctly equipped engines. I would think standard operating procedure would be to have a correct photo of each engine being done to prevent OBVIOUS mistakes.

Jay Criswell
Posts: 2004
Joined: Thu Mar 06, 2008 12:38 pm

Re: Too Quiet so let's get some opinions

Postby Jay Criswell » Wed May 17, 2017 9:42 pm

The easiest P:48 conversion has to be the Atlas SW8/9. Having said that, I bought a Sunset 3rd Rail SD9 (SP Black Widow) with the intention of seeing what it would take to produce a drop-in conversion kit. The worm gear would be the most expensive piece but it would be easy enough to have a couple of hundred made up. I have the wheels and axle stock. Bronze bearings would be easy enough to machine so the whole thing is doable. After coming to that conclusion I thought I'd run it by Scott just to make sure he wasn't going to do the same thing and he told me he's going to come up with some kind of a conversion kit for his diesels. Once he said that, i decided to bow out.....there just can't be that much demand and I have plenty of other things to do. When we last spoke it was agreed we'd talk about it at OSW. Okay, that's how I remember it.

Jay

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Too Quiet so let's get some opinions

Postby E7 » Wed May 17, 2017 10:05 pm

Rufus T. Firefly wrote:I understand that they are planning on attending and will be driving in non-stop from the East coast in a caravan of VW minibuses.......and there was something about gathering at the Delta products table.


Sort of a modeler's version of The Electric Kool-Aid Acid Test! :lol: :lol: :lol:


bob turner
Posts: 13676
Joined: Sat Jan 13, 2007 7:57 pm

Re: Too Quiet so let's get some opinions

Postby bob turner » Wed May 17, 2017 10:45 pm

Of course it was tongue-in-cheek to suggest that Bultmann's gauge was inaccurate. Those hand grabs were installed and painted yellow on purpose, too.

And hooray for the Proto-48 crowd! Having a conversion kit is a giant plus! Not every modeler has a fully equipped machine shop and the time to make stuff. Almost all of us can paint hand grabs when necessary.

Still Opinion.


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 49 guests