Page 1 of 1
You Have To Do What you Have to Do Right?
Posted: Mon Mar 18, 2024 12:23 am
by steamaheadstephen59
Re: You Have To Do What you Have to Do Right?
Posted: Mon Mar 18, 2024 8:38 pm
by De Bruin
You're referring to replacing that open face motor with a can? or is there a deeper existential issue here I'm too dense to get?
Inquiring minds...8^)
Re: You Have To Do What you Have to Do Right?
Posted: Tue Mar 19, 2024 6:01 am
by steamaheadstephen59
Well I wonted to see If the K&D motor would respond to magnets instead of the field windings. It did! but only in one direction?
Re: You Have To Do What you Have to Do Right?
Posted: Tue Mar 19, 2024 10:52 am
by up148
I thought it had to do with the big magnets on top, but not being knowledgeable with that motor I wasn't sure. So, why only one way travel?
Re: You Have To Do What you Have to Do Right?
Posted: Tue Mar 19, 2024 9:06 pm
by steamaheadstephen59
I don't understand the one direction in rotation, the polarity of the field windings would normally reverse rotation, but with the magnets, changing polarity on the brushes should change rotation. Ive tried proper rare earth magnets, but the motor wont self rotate without help from my fingers. The field isn't strong enough.
Re: You Have To Do What you Have to Do Right?
Posted: Tue Mar 19, 2024 11:45 pm
by De Bruin
I recall seeing seeing many older loco models, both steam and diesels with permag motors having that manual odd reversing lever that throws/reverses the motor contact polarity. On steam it's sometimes camouflaged as a (rotating) steam dome, on some diesels I've seen it as an old style radio antenna.
More typically though it was mounted under the frame. I know both Maroon and J.S. Bach (and lord knows Carey William) have examples of such manually reversed permag equipped caste bronze examples.
I've now grown to appreciate permags; noisy, ozone emitting, Hoover Vacumn or Waring Blender like dynamos.
Oh well...
Re: You Have To Do What you Have to Do Right?
Posted: Thu Mar 21, 2024 11:36 pm
by steamaheadstephen59
Yes I have an All Nation Ten Wheeler and it has the manual reverse and and field wound motor, runs great, and a Scale Craft Hudson with the switch in the steam dome, but this now runs batteries.