Page 1 of 3

Condition, condition, condition

Posted: Tue Sep 22, 2020 1:45 am
by ScaleCraft
https://www.ebay.com/itm/Vintage-O-Scal ... 4451022767

Yeah I know what it is even without the title.
I look at the work to bring it back. Disassemble, glass bead, repaint and re-assemble, hoping no major issue.
Front steps.....small screws to bottom of running boards missing? Cab back is gonna need some serious body work....I really like the valve timing on the left side as shown by the eccentric position.
Really is worth the $145 asking...if it was straight, painted, lettered, tested and guaranteed to run.

I'm thinking a $20 offer to see. I'd like to do one. I have no Pacifics.
Driver condition? Fit to axles? Motor (don't see a visible hand reverse)?
Something is amiss with quartering, as especially LH side counterweights don't line up.
Looks complete except for the back coal sheet and whistle.

Re: Condition, condition, condition

Posted: Tue Sep 22, 2020 8:23 am
by chuck
eBay choking on the image loads. All "photo not available".

Re: Condition, condition, condition

Posted: Tue Sep 22, 2020 12:22 pm
by De Bruin
ScaleCraft wrote: Really is worth the $145 asking...if it was straight, painted, lettered, tested and guaranteed to run.


Conversely, I'd say based on now having a bid with another day to go the seller got his listing/opening bid right, really if it was indeed "straight, painted, lettered, tested and guaranteed to run,"
wouldn't it go for a whole lot more?

Re: Condition, condition, condition

Posted: Tue Sep 22, 2020 12:24 pm
by Rufus T. Firefly
De Bruin wrote:Conversely, I'd say based on now having a bid with another day to go the seller got his listing/opening bid right........


If the objective was to sell it and make it go away - objective met!

Re: Condition, condition, condition

Posted: Tue Sep 22, 2020 12:30 pm
by bob turner
That's Carey. He knows what this stuff is worth. If perfect and straight, these things can bring $250 or more. But the fun is in resurrecting. Like Dave, I am pretty picky about these things, and I may have $30 invested in mine, but the market is there.

There really is a lot of highly overpriced junk on eBay right now, but this one is not one of that class. Opinion.

Re: Condition, condition, condition

Posted: Tue Sep 22, 2020 1:18 pm
by ScaleCraft
Long ago I assigned a dollar amount to my labor just so I'd know what the investment would be.
I carefully looked at that engine, and decided the time wasn't worth the cost, at least to me. I don't mind re-working engines and cars. Done hundreds and hundreds. But initial cost has to be low enough.
No place does he say it runs. In fact, the word is "untested", and with the eccentric the way it is, it won't.
The killer for me is the quartering. If that was ran hard and put away wet, I'd be asking if anybody had drivers that did not have the axle hole flats wobbled out.
I don't mind an open frame motor, but he doesn't say field wound or permag in his writeup.

This one is more intriguing, with 5 bids to $91, looks like most of the stuff is there:
https://www.ebay.com/itm/4-8-2-O-Scale- ... 4339384863

Re: Condition, condition, condition

Posted: Tue Sep 22, 2020 2:11 pm
by Rufus T. Firefly
ScaleCraft wrote:Long ago I assigned a dollar amount to my labor just so I'd know what the investment would be.
I carefully looked at that engine, and decided the time wasn't worth the cost, at least to me. I don't mind re-working engines and cars. Done hundreds and hundreds. But initial cost has to be low enough.
No place does he say it runs. In fact, the word is "untested", and with the eccentric the way it is, it won't.
The killer for me is the quartering. If that was ran hard and put away wet, I'd be asking if anybody had drivers that did not have the axle hole flats wobbled out.
I don't mind an open frame motor, but he doesn't say field wound or permag in his writeup.


This is why you ask the seller questions.

This one is more intriguing, with 5 bids to $91, looks like most of the stuff is there:
https://www.ebay.com/itm/4-8-2-O-Scale- ... 4339384863


Yes, also untested as to running.......let's see where it ends? $20+ for shipping........

That's Carey. He knows what this stuff is worth.


Why so it is and he does.....

Re: Condition, condition, condition

Posted: Tue Sep 22, 2020 2:31 pm
by bob turner
That is the All Nation Mountain, and is currently underpriced. Sure, like Dave, I got one from Downtown Hobbies for $35, and all I generally use is the boiler and pilot - but hey - big, powerful, no prototype . . .

I have four, counting the GS-1.

Re: Condition, condition, condition

Posted: Tue Sep 22, 2020 4:32 pm
by Rufus T. Firefly
bob turner wrote:Sure, like Dave, I got one from Downtown Hobbies for $35...........


What year?

Re: Condition, condition, condition

Posted: Tue Sep 22, 2020 5:08 pm
by ScaleCraft
bob turner wrote:That is the All Nation Mountain, and is currently underpriced. Sure, like Dave, I got one from Downtown Hobbies for $35, and all I generally use is the boiler and pilot - but hey - big, powerful, no prototype . . .

I have four, counting the GS-1.

Mine is a GM, was free, all detail parts left off by builder (located and installed), hand painted black with a brush, valve gear, rods, crosshead, guides, wheels, drivers, tires.

But the initial cash outlay made the cost of refurbishment worthwhile.

Re: Condition, condition, condition

Posted: Tue Sep 22, 2020 7:41 pm
by Dennis Holler
The GM 4-8-2 is up to $231 with 7 minutes left!

Re: Condition, condition, condition

Posted: Tue Sep 22, 2020 8:38 pm
by ScaleCraft
I shall pine away. Alas, two hundred Washingtons more than I would have spent, but its MY opinion! In the famous words of Lucy: BLEAAAAAH!

Re: Condition, condition, condition

Posted: Tue Sep 22, 2020 9:27 pm
by De Bruin
I agree. seems like way too much, but...supply and demand. Who makes chassis and frames these days, ditto rolled or cast boilers?
Better yet who CAN make them? (Bob T and Joe F can keep their hands down)

Conversely, I'm starting to see parting out ugly door stop steam might be a better strategy $-wise than posting a more intact junker.
Thinking about some of those "artillery shells" in the club's donation pile.

Re: Condition, condition, condition

Posted: Tue Sep 22, 2020 10:45 pm
by bob turner
I do not know what it closed at, but $250 was probably a bargain. It would cost five times that to produce a kit.

I think All Nations make reasonable doorstop steamers - maybe not quite as nice as Scale Craft, but still ok. Here are a couple of mine:

Image

This is the $35 variety. Don't know what I did with the original frame and drivers.

Image

Even the lowly Pacific can have some charm, if you replace the cab and sand dome - and drivers. No. I am not aware of any Pacific with 72" Boxpok drivers.

Re: Condition, condition, condition

Posted: Wed Sep 23, 2020 8:33 am
by Rufus T. Firefly
De Bruin wrote:I agree. seems like way too much, but...supply and demand. Who makes chassis and frames these days, ditto rolled or cast boilers?


A good and valid point that seems lost at too frequently.

Conversely, I'm starting to see parting out ugly door stop steam might be a better strategy $-wise than posting a more intact junker.
Thinking about some of those "artillery shells" in the club's donation pile.


Why not?