Butch, thanks for the background on the OMI turbines. We had already found the reference info on the Brasstrains website, so are presuming the date as 1982. That's quite a bit earlier than I realized. But all of the other backstory is quite interesting as well, and my friend may ultimately be interested in other turbine models. I know that the veranda has been on his list for the better part of his lifetime, so this was a big get for him. But he is a fan of big UP power, so he may pursue other versions down the road.
The turbine in question is one of the veranda types, with tender. OMI 0218, apparently. I had presumed it was not painted at the factory since there was no ".1" suffix after the model number. It had a what I thought was a pretty nice paint job, and also some light weathering, mostly exhaust grime up top and road grime around the trucks.
I don't know if the drive is original or not, I wouldn't absolutely know what to look for to identify a Cockerham drive. I also tried to handle the model as little as possible to avoid any accidents.
I was tasked with picking up the model from the seller, and forwarding it on. I ended up repackaging the loco and tender almost exactly as you described, although I fabricated a chipboard inner carton which then was wrapped with the bubble wrap. If you have ever seen the later OMI models, at least in HO scale, they included a similar chipboard wrapper, which folded up around the model, with foam bumpers pressing against hard points, then fit into the foam box insert. I was inspired by that design. We agreed that it would be best to ship the models separately from the OMI Big Green Box (BGB®

) )both for the safety of the models and to save costs. The box must have been used for the 3 unit turbines as well, as it was one and a half times too big, with a third slot that was empty.
Bob, my friend is aware of the potential issuues with the early OMI models. But as a custom builder, he's proficient with the solder and waving the hot stick around, so he's willing and capable if anything needs fixing. His biggest concern will be maintaining the existing paint job if any soldering is ultimately required.
I'll see if he minds if I post some photos, what few I have.
Jim