Page 1 of 3
Weaver’s Reading G1
Posted: Thu Oct 10, 2019 5:58 am
by 2railjon
This was a nice find.


I was abused in another site because I had it pulling a coal drag instead of passenger cars. Time to research and see if G1’s were relegated for passenger service only.
Video:
https://youtu.be/ZbSH8dYuHVk
Re: Weaver’s Reading G1
Posted: Thu Oct 10, 2019 11:01 am
by rex desilets
I confess to the abuse. In all my Reading material, photos, books, videos, I've never seen a G1 pulling anything but passenger cars.
Re: Weaver’s Reading G1
Posted: Thu Oct 10, 2019 1:11 pm
by E7
Jon, When "they" confront you with this type of thing, tell them you are aware, but that your railroad is sorely underfunded at the moment, and you are happily accepting donations (cash, no checks please) so you can purchase the proper passenger cars.

PS: Tell them that those hoppers are filled with anthracite! LOL
Re: Weaver’s Reading G1
Posted: Thu Oct 10, 2019 4:10 pm
by De Bruin
Yeah and that beautiful modernized Reading steel coach "Wall Street" set that was imported about 15 years ago commands some serious coin these days.
On a more affordable basis the 60' Atlas Trainman makes a decent stand-in for the Pressed Steel and Bethlehem cars the Reading and CNJ has, though I don't recall seeing them offered with those road names in the appropriate dark green (they did do CNJ's in the B&O Blue & Yellow)
Finally a nice string of matching Prr P-70's would be appropriate as they were used pulling Pennsylvannia-Reading Seashore Lines schedules.
Great engines those G class Pacifics, one of my favorites, that Weaver version looks nice too.
Re: Weaver’s Reading G1
Posted: Thu Oct 10, 2019 4:24 pm
by ScaleCraft
Locals have told me, when Milwaukee was dieselizing, they stuck a Northern in as a yard switcher. Lasted about two days, or so they say.
You never know.
Just about the time you figure out what the prototype was, you find a photo that causes you to re-think.
Re: Weaver’s Reading G1
Posted: Thu Oct 10, 2019 4:45 pm
by J. S. Bach
E7 wrote:Jon, When "they" confront you with this type of thing, tell them you are aware ...snip... LOL
I would tell them that I really do not care!
Re: Weaver’s Reading G1
Posted: Thu Oct 10, 2019 6:02 pm
by 2railjon
Thanks for the input!
I bought the engine because it’s a beauty of a Pacific and the price was right for 600 new in box never run. I’m not a big Reading fan as I’m more into PRR, NYC, Santa Fe, UP.
I was told SGL made a set of Reading cars that are pretty sweet. I’m sure if a set was found it would be pretty pricey now!

if at some point I decide to invest in Passenger cars these GGD’s seem reasonably priced.

I’m not sure if the G1 ever pulled them but for my cheesy layout they’d be close enough.

Re: Weaver’s Reading G1
Posted: Thu Oct 10, 2019 7:02 pm
by rex desilets
De Bruin wrote:Yeah and that beautiful modernized Reading steel coach "Wall Street" set that was imported about 15 years ago commands some serious coin these days.
Truly pricey. Lovely, though. Managed to score a couple of them to go behind my G-3.On a more affordable basis the 60' Atlas Trainman makes a decent stand-in for the Pressed Steel and Bethlehem cars the Reading and CNJ has, though I don't recall seeing them offered with those road names in the appropriate dark green (they did do CNJ's in the B&O Blue & Yellow)
The Atlas cars are a) short and b) paired window cars. Furthermore, the clerestory roofs of the original cars were rebuilt post-War into rounded -roof cars. The Reading coaches were a bit shorter than the usual 70-ft cars, too. Even if one could come up with a reasonably correct car, finding decals is impossible, absent having custom decals/dry transfers made.
I have, in my infinite TBD que, a couple Walthers single-window coached to be cut down to proper length and with reworked roofs. Some day
Finally a nice string of matching Prr P-70's would be appropriate as they were used pulling Pennsylvannia-Reading Seashore Lines schedules.
No G-1's on PRSL. Only PRR steam, at least in the 50s. Great engines those G class Pacifics, one of my favorites, that Weaver version looks nice too.
Were this a 3-rail forum, I'd say OK. I look to this forum for emphasis on accuracy &c. Apologies in advance for being a nit-picker.
Re: Weaver’s Reading G1
Posted: Thu Oct 10, 2019 7:55 pm
by bob turner
I too like the G1, as you will recall. Still haven't painted it.
Re: Weaver’s Reading G1
Posted: Fri Oct 11, 2019 10:29 am
by De Bruin
rex desilets wrote:De Bruin wrote:Finally a nice string of matching Prr P-70's would be appropriate as they were used pulling Pennsylvannia-Reading Seashore Lines schedules.
No G-1's on PRSL. Only PRR steam, at least in the 50s.
Au contraire, albeit taken in 1948, though we're talking about appropriate cars for a G1, regardless of era.
http://www.rrpicturearchives.net/locoPi ... ?id=214397
Re: Weaver’s Reading G1
Posted: Fri Oct 11, 2019 11:01 am
by rex desilets
My PRR-only assertion was based on the PRSL historical site. I stand corrected.
Think I'll go score a couple PRSL P-70s to run behind my G-1.
Thanks.
Re: Weaver’s Reading G1
Posted: Fri Oct 11, 2019 11:08 am
by 2railjon
I’m not sure how to navigate the link. All I see is 2 locomotives and no passenger cars.
Re: Weaver’s Reading G1
Posted: Fri Oct 11, 2019 1:47 pm
by De Bruin
That's all there is in the photo Jon, an E6 and a G1 taken in the PRSL yard in Camden NJ. The Reading and PRR shared equipment and operations/trackage in South Jersey using the PRSL. To Rex's point most of the G series Pacifics I've seen photos of on the PRSL were the more modern looking "brute-iful" G3's (opinion, pretty much awesome looking like most Reading steam power ) The consist's would typically be either Reading or PRR passenger cars in commuter service or on Atlantic City or Cape May runs from Philly or Camden etc. It was fascinating railroad, and ideal to model if you were a fan of both roads.
Re: Weaver’s Reading G1
Posted: Fri Oct 11, 2019 2:17 pm
by rex desilets
De Bruin wrote:That's all there is in the photo Jon, an E6 and a G1 taken in the PRSL yard in Camden NJ. The Reading and PRR shared equipment and operations/trackage in South Jersey using the PRSL. To Rex's point most of the G series Pacifics I've seen photos of on the PRSL were the more modern looking "brute-iful" G3's (opinion, pretty much awesome looking like most Reading steam power ) The consist's would typically be either Reading or PRR passenger cars in commuter service or on Atlantic City or Cape May runs from Philly or Camden etc. It was fascinating railroad, and ideal to model if you were a fan of both roads.
Although I'm a dedicated PRR foamer, I *weep* about the dearth of Reading power available in O scale (e.g. an I-10, a K-1). Must not be very many Reading aficionados. Yet, 3rd Rail saw fit to produce a T&P 2-10-4. Go figure.

Re: Weaver’s Reading G1
Posted: Fri Oct 11, 2019 5:36 pm
by Chris Webster
rex desilets wrote:Although I'm a dedicated PRR foamer, I *weep* about the dearth of Reading power available in O scale (e.g. an I-10, a K-1). Must not be very many Reading aficionados.
Since you're discussing RDG power, I thought I would ask if you know who made these T-1s that recently sold on feebay:
Ebay 163899514173and
Ebay 153678882783Are they KTM, or something else?
The same seller has a N-1 (I think) still available at the time of my posting:
Ebay 163899279761