Fit This Rectangle Into This Trapizoid

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
2railjon
Posts: 15906
Joined: Fri Apr 02, 2004 2:33 pm

Fit This Rectangle Into This Trapizoid

Postby 2railjon » Sun Jan 13, 2019 4:59 pm

What were they thinking??
Image

Each car came with #805 Kadee couplers. Not the #806 short box couplers either.

Image

So the morning was spent creatively sawing coupler boxes. :roll: :lol:
Image
Running that red block Charlie.

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Fit This Rectangle Into This Trapizoid

Postby E7 » Sun Jan 13, 2019 5:21 pm

They were probably thinking: I'm not the poor sap who is going to be messing with these, so I don't care how big a PITA it is. My inclination would be, once one light went out, to rewire it for 2 maybe 3 bulbs or maybe better yet LED's! That might be a thought: once one goes put in LED's. :mrgreen: How bright do the interiors have to be anyhow?

Rich

User avatar
Rufus T. Firefly
Posts: 42227
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Fit This Rectangle Into This Trapizoid

Postby Rufus T. Firefly » Sun Jan 13, 2019 5:35 pm

E7 wrote:They were probably thinking


Stop right there. They weren't.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

User avatar
big bad jim
Posts: 446
Joined: Wed Oct 06, 2010 1:38 pm

Re: Fit This Rectangle Into This Trapizoid

Postby big bad jim » Sun Jan 13, 2019 5:46 pm

Not trying to be a smartass here, but is it possible that you are only supposed to switch the coupler, installing the Kadee in the existing box? I've no idea what the factory coupler box cover looks like. But the instructions do only mention to switch the coupler, and also claim that it will be simple, which sounds distinctly different to cutting and shaping Kadee coupler boxes as you have.

Jim

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Fit This Rectangle Into This Trapizoid

Postby E7 » Sun Jan 13, 2019 5:47 pm

Rufus T. Firefly wrote:
E7 wrote:They were probably thinking


Stop right there. They weren't.


Maybe they were automotive engineers! :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Fit This Rectangle Into This Trapizoid

Postby E7 » Sun Jan 13, 2019 5:50 pm

E7 wrote:
Rufus T. Firefly wrote:
E7 wrote:They were probably thinking


Stop right there. They weren't.


Maybe they were automotive engineers! :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:


Mitch, would you care to weigh in on this one? :mrgreen:

User avatar
2railjon
Posts: 15906
Joined: Fri Apr 02, 2004 2:33 pm

Re: Fit This Rectangle Into This Trapizoid

Postby 2railjon » Sun Jan 13, 2019 5:54 pm

LOL, Rich and Rufus! They won’t be any shelf relics. I plan to run and enjoy them! When a bulb goes out, it’s LED strip time. Will it decrease the resale value? That’s my wife’s problem, I’ll be dead. :lol:
Running that red block Charlie.

User avatar
2railjon
Posts: 15906
Joined: Fri Apr 02, 2004 2:33 pm

Re: Fit This Rectangle Into This Trapizoid

Postby 2railjon » Sun Jan 13, 2019 5:59 pm

Jim, this is how the couplers factory installed looked on the cars. No factory installed coupler box anywhere to be seen! :lol:
Image
Running that red block Charlie.

User avatar
Mitch
Posts: 5215
Joined: Sat May 28, 2005 2:06 pm
Location: Freeport, Pa.

Re: Fit This Rectangle Into This Trapizoid

Postby Mitch » Sun Jan 13, 2019 8:05 pm

E7 wrote:
E7 wrote:
Rufus T. Firefly wrote:
Stop right there. They weren't.


Maybe they were automotive engineers! :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:


Mitch, would you care to weigh in on this one? :mrgreen:


Nah! If designed by SAE people, the part you need to service would be turned around backwards and totally unaccessable! :wink:
If you agree with the Progressives, it's freedom of speech. If you disagree, it's hate speech. There are no alternatives.

User avatar
big bad jim
Posts: 446
Joined: Wed Oct 06, 2010 1:38 pm

Re: Fit This Rectangle Into This Trapizoid

Postby big bad jim » Sun Jan 13, 2019 9:46 pm

Ok, I thought maybe there was a cover that you had removed prior to taking the first picture. Thanks,
Jim

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Fit This Rectangle Into This Trapizoid

Postby E7 » Sun Jan 13, 2019 11:23 pm

Mitch wrote:
E7 wrote:
E7 wrote:
Maybe they were automotive engineers! :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:


Mitch, would you care to weigh in on this one? :mrgreen:


Nah! If designed by SAE people, the part you need to service would be turned around backwards and totally unaccessable! :wink:


I know better than that, you are too darned good a mechanic!

User avatar
2railjon
Posts: 15906
Joined: Fri Apr 02, 2004 2:33 pm

Re: Fit This Rectangle Into This Trapizoid

Postby 2railjon » Mon Jan 14, 2019 9:14 am

My first choice was to use Protocraft couplers but I’m not sure how the cars are wired and didn’t want to deal with any shorts between the cars.
Image
Running that red block Charlie.

E7
Posts: 8404
Joined: Wed Dec 12, 2007 1:35 am

Re: Fit This Rectangle Into This Trapizoid

Postby E7 » Mon Jan 14, 2019 7:47 pm

E7 wrote:
Mitch wrote:
E7 wrote:
Mitch, would you care to weigh in on this one? :mrgreen:


Nah! If designed by SAE people, the part you need to service would be turned around backwards and totally unaccessable! :wink:


I know better than that, you are too darned good a mechanic to let a little thing like that bother you!


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: Chris Webster, Google [Bot] and 62 guests