Page 1 of 1

Mastercraft Models from LA ...

Posted: Tue Sep 25, 2018 6:42 pm
by Carey Williams
Hello all

Who has heard of Mastercraft Models ...of LA , CA ??? 30's / 40's ???...

New toy from Indy ( thank you Dan ..great show) ...

Gentlemen from AZ ...had on his table a box with a cast aluminum tank car kit ...split tank akin to Miloco & Mini-Scale ....but different ..please see photos ... seller said the owner of Mastercraft worked as a tool and die worker for Atheran .... and developed his own O scale line .... along with the tank car kit ...there was the remains of "Mastercraft"....one small humble box filled with some interesting pieces ..which I'll lay out and post some images ... he was building a steam engine ..... boiler ...two halves that mate together ...!!! I checked MR 1939 -41 and 46-47 ..no sign of ads ... anyone out there have any info about Mastercraft ?

Thank you
Cheers Carey

P_20180925_092459_LL.jpg
P_20180925_092459_LL.jpg (984 KiB) Viewed 4645 times

P_20180925_092512_LL.jpg
P_20180925_092512_LL.jpg (1.07 MiB) Viewed 4645 times

Re: Mastercraft Models from LA ...

Posted: Tue Sep 25, 2018 10:34 pm
by De Bruin
Wow, that cast part set is very cool. Anyone else seen these or better yet have one?
Carey, how does one resist not finishing one of these?

I'm involuntarily thinking where I'd tap and drill, and what other parts are needed.

Re: Mastercraft Models from LA ...

Posted: Wed Sep 26, 2018 10:33 am
by Rufus T. Firefly
De Bruin wrote:...........how does one resist not finishing one of these?

I'm involuntarily thinking where I'd tap and drill, and what other parts are needed.


Right there with you on that! :mrgreen:

Re: Mastercraft Models from LA ...

Posted: Wed Sep 26, 2018 1:26 pm
by bob turner
I have the aluminum MiLoco and a heavier Mini-Scale. I had thought they were one piece - but I can see the seam. I am guessing some kind of adhesive? I would clean and stick it together with epoxy.

Re: Mastercraft Models from LA ...

Posted: Thu Sep 27, 2018 7:39 pm
by J. S. Bach
De Bruin wrote:Carey, how does one resist not finishing one of these?.

With a blowtorch?

Re: Mastercraft Models from LA ...

Posted: Thu Sep 27, 2018 8:30 pm
by E7
bob turner wrote:I have the aluminum MiLoco and a heavier Mini-Scale. I had thought they were one piece - but I can see the seam. I am guessing some kind of adhesive? I would clean and stick it together with epoxy.


Maybe a dumb question, but is there a reason that you need to take it apart?

Re: Mastercraft Models from LA ...

Posted: Thu Sep 27, 2018 8:38 pm
by bob turner
Not taking mine apart. They were wondering how to bolt it together.

Back to the Bulldog: what’s your favorite picture book on E-7s? I have only an SP paperback book, and it is mostly F-units.

Re: Mastercraft Models from LA ...

Posted: Fri Sep 28, 2018 12:33 am
by De Bruin
Butting in here Bob.
I'm not following where you're going .
Do you need prototype photos to choose an appropriate version to finish?
Or do you lack a basic EMD E7 plan for the carbody details you should be finishing all of those with?

Re: Mastercraft Models from LA ...

Posted: Fri Sep 28, 2018 1:09 am
by Carey Williams
Hello all.....the castings are pretty good....screw to base and epoxy seam?.......here are some photos of the balance the the Mastercraft Models company......some items marked pattern, bronze bits on trees ....very nice quality detail on the trucks ...interesting little steamer project.......this could have all been thrown in a box when WW2 began....never to be touched again ??? ....hopefully someone, some where , will be able to.shed some light on Mastercraft Models....
Cheers Carey

P_20180927_184213_LL.jpg
P_20180927_184213_LL.jpg (1.33 MiB) Viewed 4456 times

P_20180927_183658_LL.jpg
P_20180927_183658_LL.jpg (1.11 MiB) Viewed 4456 times

P_20180927_183646_LL.jpg
P_20180927_183646_LL.jpg (886.29 KiB) Viewed 4456 times

P_20180927_183636_LL.jpg
P_20180927_183636_LL.jpg (950.28 KiB) Viewed 4456 times

P_20180927_183620_LL.jpg
P_20180927_183620_LL.jpg (967.51 KiB) Viewed 4456 times

P_20180927_183628_LL.jpg
P_20180927_183628_LL.jpg (1.05 MiB) Viewed 4456 times

Re: Mastercraft Models from LA ...

Posted: Fri Sep 28, 2018 1:45 am
by E7
bob turner wrote:Not taking mine apart. They were wondering how to bolt it together.

Back to the Bulldog: what’s your favorite picture book on E-7s? I have only an SP paperback book, and it is mostly F-units.


Bob, you're making the old noggin hurt! :lol: :lol: :lol:

I am mostly PRR oriented. There is a guy (beware, as this is from memory, or the lack thereof) named Paul K. Withers that put out a pile of paperbacks, one in particular on E units.

A slow drum roll while I do some Net searches. :mrgreen:

Turns out my memory is not so bad, and Ol' Paul put out a ton of books on VARIOUS roads:

Here is a link to the book I mentioned above:


https://www.allbookstores.com/Pennsylva ... 1881411369


You will like it because it also covers Alco PA's. The problem might be finding a copy!

Mine is around the house somewhere, but just EXACTLY where that "somewhere" is, only the good Lord knows.

I think mine cost about 20 bucks new.

BOB: CHECK YOUR PM's

Rich