Page 1 of 3

Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation

Posted: Fri Jan 12, 2018 12:05 pm
by R.K. Maroon
All --

I just sold a CLW kit for the PRR H-10 2-8-0 on eBay. I inventoried all the parts to verify that it was complete, but I failed to inventory the instructions. (There was a good amount of paper in each box so I just assumed all the instructions were there). As it is, the kit is missing the locomotive and tender assembly drawings, numbers 1140 and 1180. Please contact me by PM or email if you have a set that you can spare or copy (or send to me and I will copy and return). My email address is jdebruin at sbcglobal dot net.

Thanks
Jim

Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation

Posted: Fri Jan 12, 2018 12:56 pm
by Carey Williams
Hello Jim

sorry I do not have a set of instructions .....how ever you could point the new owner to Model Railroading 1954 ..Bob Klubertanz did a 5 + part series articles about putting together a CLW 2-8-0 part 4 is in April 1954 .

Cheers Carey

Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation

Posted: Fri Jan 12, 2018 1:03 pm
by Jay Criswell
What a maroon! :mrgreen:

I wonder if Steve Neill can help.

Steve?

Jay

Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation

Posted: Fri Jan 12, 2018 1:38 pm
by bob turner
I will look. The H-10 was my first O Scale steam kit, and I did follow the instructions. If I can find them they are yours.

Since then I have found instructions mostly boring and useless. I regard the Lobaugh instructions as not worth the read, and shudder at ever going through an inventory.

Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation

Posted: Fri Jan 12, 2018 2:38 pm
by Robert
Jim...check your email. I sent you several files worth of the instructions for that kit. Hopefully it will include all you need. Let me know.

Robert

Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation

Posted: Fri Jan 12, 2018 3:23 pm
by R.K. Maroon
What a Maroon indeed! Jay, I have heard that Steve has an impressive library of documentation, so I will not be surprised if he has these plans.

Robert, I did receive the files you sent and have forwarded them to the buyer. Thank you very much for that.

Thanks to Carey for the tip on the Model Railroader article. I have the digital archives and can print PDFs. I will see if the buyer is interested.

Bob -- Please do let me know if you have the original plans. Do you still have the H-10? I have wondered just how much Bob Smith changed the Saginaw when he put out this kit.

Image

Jim

Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation

Posted: Fri Jan 12, 2018 7:12 pm
by stephen neill
Jim - I will look. I don't have one of the kits, but I may have the instructions.
Steve

Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation

Posted: Fri Jan 12, 2018 8:28 pm
by bob turner
Off the hook. My filing system sucks!

We may have done this fine model before, but I am all for posting photos in conjunction with Maroon's request. I think there were three versions - two by ClW and of course the original by Saginaw/Lenore.

Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation

Posted: Fri Jan 12, 2018 8:44 pm
by stephen neill
I looked, and I don't have them I will ask others who may have them.
Steve

Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation

Posted: Sat Jan 13, 2018 8:42 am
by rrjjf
Which version of the H-10 kit do you have, iron drivers, lost wax brass drivers or cast epoxy center drivers? The epoxy driver kits were the last produced and require installation of spring loaded pickup wipers on the loco frame that contact the driver tires

Joe

Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation

Posted: Sat Jan 13, 2018 9:49 pm
by bob turner
I am almost certain I have the instructions - buried. I shall search soon.

I did not know Smith made lost wax brass drivers for the H10, although I have a set from the PS-4, and they are gorgeous. The glass-filled plastic drivers are adequate, but if you need to do something, like add a NWSL gearbox, it gets involved.

Not sure how many photos I have, but here is a start. Yes, I have my original, plus a Saginaw, plus another CLW, plus fragments, plus one converted to an Atlantic, plus - plus -

Saginaw 006.jpg
Saginaw 006.jpg (848.5 KiB) Viewed 6163 times

Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation

Posted: Sat Jan 13, 2018 9:54 pm
by bob turner
Well, that is a Saginaw. I have no photos of the others, but this is the H10 converted to an Atlantic - scratch tender, Saginaw frame modified for sprung drivers, Lobaugh drivers. Happy!

Saginaw 004.jpg
Saginaw 004.jpg (770.34 KiB) Viewed 6162 times

Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation

Posted: Sat Jan 13, 2018 10:24 pm
by bob turner
Found the envelope. Contains H10, Northern, lots of CLW ads and literature. Want it all, or just the H10?

Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation

Posted: Sun Jan 14, 2018 10:37 am
by Robert
bob turner wrote:I did not know Smith made lost wax brass drivers for the H10


The H10 Kit I bought from Joe F. had brass drivers...and yes they are real nice.

Robert

CLW H10 Kit (13).JPG

Re: Screwed Up -- Need Instructions for a CLW PRR H-10 Consolidation

Posted: Sun Jan 14, 2018 7:03 pm
by R.K. Maroon
Much to respond to here:

Joe -- To answer your question regarding the drivers, the kit I sold has resin drivers with steel tires. They were already painted when this kit arrived, so I don't know what they looked liked bare. As you might expect, the spokes and hubs are clean -- no casting voids, etc.

Bob -- Thanks for posting the photos of the Saginaw and other variants. The Long Island markings are cool. Did this one come to you that way or is that your work? I am not much of a PRR modeler but if I stumbled on a nice Saginaw at a show table for a reasonable price it would probably have to come home with me.

Robert -- It looks like the center drivers are blind on your set. Am I seeing that right? I don't know when those lost-wax brass drivers were offered but I'm a little surprised that they would have come blind. Did you consider negotiating with Joe to have flanges added, or does the lack thereof support your layout operations?

Bob -- I sent you an email on the documentation. I would indeed like to have it all for the library -- or at least long enough to scan it in.

Thanks to all for the posts and responses,
Jim