Page 1 of 3
Model under construction IGN ( MP ) #896 Dome
Posted: Sat Aug 26, 2017 2:46 am
by cole7015
Here is a model on the work bench. This is a Pullman dome car for the IGN #896 ( MP ) same as the T&P 200 shown. Model is
99% scratch built from .020" sheet brass with Wasatch 41 n type trucks. will have complete interior with LED lighting. Construction
methods as shown were outlined in My extensive articles from 4 issues of O scale Resource on line. The building of T&P Baggage Dorm #300.
regards
Bill Basden
Re: Model under construction IGN ( MP ) #896 Dome
Posted: Sat Aug 26, 2017 6:38 am
by GreggL
Oh yeah, want to watch this one being built. Keep the pictures coming please.
..gregg
Re: Model under construction IGN ( MP ) #896 Dome
Posted: Sat Aug 26, 2017 6:56 am
by rrjjf
Cole,
Wow!. That's a lot of layout and cutting but so far it looks terrific.
Joe
Re: Model under construction IGN ( MP ) #896 Dome
Posted: Sat Aug 26, 2017 7:41 am
by cole7015
Gregg thanks for comments. this was the one I was taking to OSW 2017 but it wasn't ready. Since I came back it is all done
and ready to do the paint and descaling on it.
But I am have trouble up loading more pictures for some reason.
Bill
GreggL wrote:Oh yeah, want to watch this one being built. Keep the pictures coming please.
..gregg
Re: Model under construction IGN ( MP ) #896 Dome
Posted: Sat Aug 26, 2017 9:06 am
by cole7015
cant send any more photo's massage says Board quota has been reached.
rrjjf wrote:Cole,
Wow!. That's a lot of layout and cutting but so far it looks terrific.
Joe
Re: Model under construction IGN ( MP ) #896 Dome
Posted: Sat Aug 26, 2017 9:42 am
by Seaboard Air Line Fan
cole7015 wrote:cant send any more photo's massage says Board quota has been reached.
Same here Bill, tried to upload a few this morning and got the message.
Re: Model under construction IGN ( MP ) #896 Dome
Posted: Sat Aug 26, 2017 11:16 am
by E7
The dome section alone, is pretty much a work of art!
Rich
Re: Model under construction IGN ( MP ) #896 Dome
Posted: Sat Aug 26, 2017 11:25 am
by Rufus T. Firefly
Thanks for sharing this here - really appreciate seeing an ongoing craftsman project.

Re: Model under construction IGN ( MP ) #896 Dome
Posted: Sat Aug 26, 2017 12:55 pm
by bob turner
I'll say! Can't wait for the finised car photos. Let us know how you attach window glazing. I have a dome awaiting that task.
Re: Model under construction IGN ( MP ) #896 Dome
Posted: Sat Aug 26, 2017 2:17 pm
by cole7015
bob turner wrote:I'll say! Can't wait for the finised car photos. Let us know how you attach window glazing. I have a dome awaiting that task.
Well it was was designed for the glazing to snap into the inside. I going to use tinted Xray film cut from the templates
i have made. there is a lower 8" box section that will contain the LED lighting strips along the sides one LED on each end
lights the whole strip. using clear resin rod..
Now FWIW I am posting here, and would never think of doing it on the NK OGR forum. I was banned for life.
Bill Basden
Re: Model under construction IGN ( MP ) #896 Dome
Posted: Sat Aug 26, 2017 10:56 pm
by Chris Rock
Agreed, this is a great start to the tutorial. It looks like it will be an awesome project.
Re: Model under construction IGN ( MP ) #896 Dome
Posted: Mon Aug 28, 2017 5:58 am
by cole7015
more photo's
Re: Model under construction IGN ( MP ) #896 Dome
Posted: Mon Aug 28, 2017 9:26 am
by up148
Beautiful, exceptional and after your award winning baggage car, I would expect no less from you. Look forward to future photos and builds.
BH
Re: Model under construction IGN ( MP ) #896 Dome
Posted: Mon Aug 28, 2017 10:56 am
by Rufus T. Firefly
I am looking forward to seeing how that glazing gets added in hopes of learning a new trick or 3.
Re: Model under construction IGN ( MP ) #896 Dome
Posted: Mon Aug 28, 2017 11:54 am
by cole7015
Butch
thanks for the comments. If you followed the 4 part article in OSR for the Baggage Dorm I always talked about setting the bar higher
with each new project. Well this was the ultimate Bar for a model. I think I got 90% of what I could see from research
and photo's and common sense on how it should be done. As you can see all the interior walls were cut from brass and soldered
in place. A lot of module sub assembly work, and 100++ 1.4 MM FH screws.
Bill Basden
up148 wrote:Beautiful, exceptional and after your award winning baggage car, I would expect no less from you. Look forward to future photos and builds.
BH