Ten Wheeler

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
up148
Posts: 4792
Joined: Sat Nov 01, 2008 11:52 am

Re: Ten Wheeler

Postby up148 » Tue May 26, 2026 3:21 pm

Beautiful!! I love air and train lines and the more the better. It seems in later years all these really neat appliances and details were hidden under boiler sheathing.

SWrailroader
Posts: 157
Joined: Sat Dec 28, 2024 11:24 am

Re: Ten Wheeler

Postby SWrailroader » Tue May 26, 2026 4:26 pm

Bob,
Both the “lost” ten wheeler and the painted 2348 look fantastic. Is that Dupli-color semigloss black on the 2348? Looks like you are using a hefty U joint which I have not recognized before. Presumably both are Pittman 8000 powered with the rare earth magnet type?
Rob

bob turner
Posts: 13675
Joined: Sat Jan 13, 2007 7:57 pm

Re: Ten Wheeler

Postby bob turner » Mon Jun 15, 2026 1:52 pm

Bump.
I just shot the one pictured with SEM self-etching primer - $30 for a rattle can. Semi-gloss; seems to hold decals without the cloud associated with flat paint.

Most of my U-joints are the larger NWSL, with added glass fiber. They don't make them that way any more.

Photo soon.

User avatar
Rufus T. Firefly
Posts: 42220
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Ten Wheeler

Postby Rufus T. Firefly » Tue Jun 16, 2026 8:17 am

bob turner wrote:Most of my U-joints are the larger NWSL, with added glass fiber. They don't make them that way any more.


Does anyone make good ones now?
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.

bob turner
Posts: 13675
Joined: Sat Jan 13, 2007 7:57 pm

Re: Ten Wheeler

Postby bob turner » Fri Jun 19, 2026 2:20 pm

The "horney balls" are the best for this kind of power, since they can be easily coupled or uncoupled. I used a set of metal parts on Maroon's Mongrel Mogul, pulled off an ancient A-N Diesel transmission.

All of my steam, and indeed all Diesels now, use a variant of the 8x24 Pittman. I still have a box full of double shaft 8224 ball bearing Pittmans, obtained directly from Charlie Pittman. They are now worth triple what I paid for them. And for gears, I will use original gearing, or the Mod O.5 and O.6 NWSL non-idler boxes. I have two from the latest production, so when I install them I will hammer out a product review here.

I suspect the Celcon NWSL parts will hold up ok, but have not tried them yet. The plastic doesn't inject as well as the mixture Raoul used when NWSL was in Seattle. But it should be ok - the gears were never glass impregnated, yet they hold up as well as any, and way better than some early Sunset or Overland axle gears.

I should note that the "lost" ten-wheeler was a bit high at the cab end, even for a 17/64 model, and it is going to get lowered a bit. The mismatch between it and the All Nation deal will be less obvious when I get around to that.

This ten-wheeler is a freelance whimsy. I have no need to power it. Cylinders and Backhead are off a weird live steamer that my friend George Sokol sent some years back. It could use a bigger stack and a re-shaped sand dome, I guess.

Image


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 56 guests