Recent acquisitions & restoration projects.....

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
Rufus T. Firefly
Posts: 42114
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquisitions & restoration projects.....

Postby Rufus T. Firefly » Sat Feb 21, 2015 7:24 pm

Hmmmmmm............and it's brother has arrived.......

Image

Image

also on trucks that just have to go...............

So......these came from two rather different sources, and I begin to wonder it some individual made two lost brothers that I am reuniting or whether a kit did exist for this car? Anyone want to hazard a guess or a bit of info?
Once, men turned their thinking over to machines in the hopes that this would set them free. But that only permitted other men with machines to enslave them.

User avatar
John Webster
Posts: 839
Joined: Sat Feb 05, 2011 4:29 am
Location: Painesville, Ohio

Re: Recent acquisitions & restoration projects.....

Postby John Webster » Sun Feb 22, 2015 12:57 am

Lovely drover's caboose, well built. Why do the trucks have to go?
You begin flying with a full bag of luck and an empty bag for experience. The object is to fill the bag of experience before you empty the bag of luck.

User avatar
Rufus T. Firefly
Posts: 42114
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquisitions & restoration projects.....

Postby Rufus T. Firefly » Sun Feb 22, 2015 8:32 am

John Webster wrote:Lovely drover's caboose, well built.


An equal to the prior one and almost identical in build quality.

Why do the trucks have to go?


Unsprung rigid archbars are under it now and I have better to put under this car, presuming that I do keep it.
Once, men turned their thinking over to machines in the hopes that this would set them free. But that only permitted other men with machines to enslave them.

User avatar
Rufus T. Firefly
Posts: 42114
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquisitions & restoration projects.....

Postby Rufus T. Firefly » Wed Aug 19, 2015 2:07 pm

Seems like it took forever, but this car finally reached the bench......

Image

Had repaired the broken end.....

Image

Image

And, now after a few bits, odds & ends this past week, it's ready for paint.

Image

Image

Image

Image
Once, men turned their thinking over to machines in the hopes that this would set them free. But that only permitted other men with machines to enslave them.

up148
Posts: 4724
Joined: Sat Nov 01, 2008 11:52 am

Re: Recent acquisitions & restoration projects.....

Postby up148 » Wed Aug 19, 2015 2:32 pm

Nice job all the way around Martin. What mfg. is it as it has great detail?

Butch

User avatar
Rufus T. Firefly
Posts: 42114
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquisitions & restoration projects.....

Postby Rufus T. Firefly » Wed Aug 19, 2015 2:36 pm

up148 wrote:Nice job all the way around Martin. What mfg. is it as it has great detail?

Butch


Absolutely no idea! :lol: It is a very nice car!!

I'm not even sure if this an eBay or Strasburg meet acquisition (maybe I need to start a "Not so recent acquisitions...)...and I seem to recall it being very cheap so Strasburg rings faintly louder than any other source.

I do wish I had a couple more of them!!!
Once, men turned their thinking over to machines in the hopes that this would set them free. But that only permitted other men with machines to enslave them.

User avatar
rogruth
Posts: 24452
Joined: Sun Aug 14, 2005 8:32 pm
Location: pembroke,ga

Re: Recent acquisitions & restoration projects.....

Postby rogruth » Wed Aug 19, 2015 7:44 pm

Very nice. Waiting to see the finishing paint and lettering.
roger

I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH

J. S. Bach
Posts: 5820
Joined: Wed May 16, 2007 9:30 pm

Re: Recent acquisitions & restoration projects.....

Postby J. S. Bach » Wed Aug 19, 2015 9:18 pm

Rufus T. Firefly wrote:I'm not even sure if this an eBay or Strasburg meet acquisition (maybe I need to start a "Not so recent acquisitions...)...and I seem to recall it being very cheap so Strasburg rings faintly louder than any other source. I do wish I had a couple more of them!!!


If it ends up looking as good as that flat you sold to me, it will be a definite winner!

User avatar
Rufus T. Firefly
Posts: 42114
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquisitions & restoration projects.....

Postby Rufus T. Firefly » Thu Aug 20, 2015 7:53 am

J. S. Bach wrote:
Rufus T. Firefly wrote:I'm not even sure if this an eBay or Strasburg meet acquisition (maybe I need to start a "Not so recent acquisitions...)...and I seem to recall it being very cheap so Strasburg rings faintly louder than any other source. I do wish I had a couple more of them!!!


If it ends up looking as good as that flat you sold to me, it will be a definite winner!


It's a lot nicer than that flat, :lol:
Once, men turned their thinking over to machines in the hopes that this would set them free. But that only permitted other men with machines to enslave them.

User avatar
Rufus T. Firefly
Posts: 42114
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquisitions & restoration projects.....

Postby Rufus T. Firefly » Tue Sep 01, 2015 7:53 am

Another little wood car - probably from a Main Line kit....

Image

Image

A few details to touch up, but another useful car......off into the paint queue and then probably some interesting dry transfers from Clover House if I can make a decision...
Once, men turned their thinking over to machines in the hopes that this would set them free. But that only permitted other men with machines to enslave them.

User avatar
Erik C Lindgren
Posts: 1307
Joined: Wed Apr 28, 2010 11:37 pm
Contact:

Re: Recent acquisitions & restoration projects.....

Postby Erik C Lindgren » Thu Sep 03, 2015 11:56 pm

Nice work Martin!

User avatar
Rufus T. Firefly
Posts: 42114
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquisitions & restoration projects.....

Postby Rufus T. Firefly » Fri Sep 04, 2015 7:41 am

Erik C Lindgren wrote:Nice work Martin!


All I did was to clean it up and tidy up a few details. Thought about adding more underbody details, but I think I'd make a mess of the car.

Most recent car I've built in my free time:

Image

Image
Once, men turned their thinking over to machines in the hopes that this would set them free. But that only permitted other men with machines to enslave them.

up148
Posts: 4724
Joined: Sat Nov 01, 2008 11:52 am

Re: Recent acquisitions & restoration projects.....

Postby up148 » Fri Sep 04, 2015 12:09 pm

That's a great looking car! So much to like about it that it's hard to know where to start. Lot's of great details. Nice.

Butch

User avatar
Rufus T. Firefly
Posts: 42114
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquisitions & restoration projects.....

Postby Rufus T. Firefly » Fri Sep 04, 2015 12:29 pm

Thanks! I built that one since (1) the project box was at the front of the queue and (2) I need to build something to get myself moving again....

Here's the next up - variation on a theme....

Image

Image
Once, men turned their thinking over to machines in the hopes that this would set them free. But that only permitted other men with machines to enslave them.

User avatar
Rufus T. Firefly
Posts: 42114
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquisitions & restoration projects.....

Postby Rufus T. Firefly » Sun Sep 06, 2015 1:58 pm

I have been trying to clear away a god bit of kits, project boxes, etc. if only to take back a goodly portion of my workshop. The MoW cars have been coming out of one queue stacked up on the wood lathe, while this car came out of a mislabeled All-Nation/Zimmer box for a box trailer.

Needed the brake wheel, rachet & pawl, ends, couplers to be remounted with screws, 2 of the truss rods were missing, and then the stake pockets. Fortunately, there was a container of the latter, and strip metal for the ends, and some brass wire to make the missing truss rods up.

Image

Hope I get a few good painting days in a few weeks!
Once, men turned their thinking over to machines in the hopes that this would set them free. But that only permitted other men with machines to enslave them.


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 23 guests