Is this ugly or What?
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Is this ugly or What?
Parts of it are Lobaugh. That is an SP-syle cab. I threw it together at the turn of the century for Frank Thomson, who had had his entire collection sold by well-meaning saviors of old folk. All he had left was a room in a nursing home.
He liked spoked pilot wheels and Walschaerts gear on the front driver, and I knew he would not have power, so made it a "push" model. I included a Thomas 4-wheel bobber from "Ohio Central". I shall remember the guy's name soon.
Anyway, Frank croaked at the relatively young age of 102 or something, and the nursing home sent the model back to me. Only damage was the die cast end of the caboose.
He liked spoked pilot wheels and Walschaerts gear on the front driver, and I knew he would not have power, so made it a "push" model. I included a Thomas 4-wheel bobber from "Ohio Central". I shall remember the guy's name soon.
Anyway, Frank croaked at the relatively young age of 102 or something, and the nursing home sent the model back to me. Only damage was the die cast end of the caboose.
- John Webster
- Posts: 839
- Joined: Sat Feb 05, 2011 4:29 am
- Location: Painesville, Ohio
Re: Is this ugly or What?
Bob, that's a nice 4-4-0. It could benefit from slightly larger drivers, slide valves and oil lamps.
As for what happened to your friend, that was (and may still be) a common scam in the county where I live. People from the local elderly care agency look for old folks who don't have close contact with relatives. They send out an agent who determines they are no longer capable of caring for themselves. This assessment is given to the probate court judge who appoints a lawyer friend to be their "gaurdian et litem". The lawyer takes control of their estate, handling all their finances. Eventually the lawyer's fees bankrupt the estate and the person is hauled off to a nursing home by the Sheriff's deputies. Their home and possessions are sold to friends of the lawyer and the social security payments go directly to the nursing home. Everybody gets a kickback and everybody is happy.
That may be why 30% of the nursing homes in my county are rated good or better and 80% of the nursing homes in the county to the south of here are rated good or better.
As for what happened to your friend, that was (and may still be) a common scam in the county where I live. People from the local elderly care agency look for old folks who don't have close contact with relatives. They send out an agent who determines they are no longer capable of caring for themselves. This assessment is given to the probate court judge who appoints a lawyer friend to be their "gaurdian et litem". The lawyer takes control of their estate, handling all their finances. Eventually the lawyer's fees bankrupt the estate and the person is hauled off to a nursing home by the Sheriff's deputies. Their home and possessions are sold to friends of the lawyer and the social security payments go directly to the nursing home. Everybody gets a kickback and everybody is happy.
That may be why 30% of the nursing homes in my county are rated good or better and 80% of the nursing homes in the county to the south of here are rated good or better.
You begin flying with a full bag of luck and an empty bag for experience. The object is to fill the bag of experience before you empty the bag of luck.
- Rufus T. Firefly
- Posts: 42229
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Is this ugly or What?
John Webster wrote:Everybody gets a kickback and everybody is happy.
Except for the elderly person...
I think we just arrived at the ugly component.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: Is this ugly or What?
Bob,
I have one of the Lobaugh 4-4-0 models in my collection. I believe Lobaugh advertised this as a New Haven 4-4-0 prototype. I have no idea how close it is to that loco. When I found the one I own it had an All Nation brass tender attached to it. A few years ago at the Cleveland O meet Bill Davis had an untouched Lobaugh Mongrel Mogul kit with the correct 4-4-0 tender and I purchased the kit from him. The correct tender is now behind my 4-4-0 and I found a Lobaugh slope backed tender kit on ebay a few months ago that, with a few modifications, will go behind the Mogul that is also now assembled. The Mogul currently has a Max Gray low side PRR tender behind it that I believe was made for their C-1 PRR 0-8-0 switcher. It looks OK behind the Mogul but I have another use for the PRR tender.
I ordered a pair of Lobaugh SP Switcher main rod castings from Bob Stevenson and used them on the Mogul mechanism instead of the very short main rods that came with the Mogul kit. The short main rods that came with the Mogul kit just do not look right and the MR trade Topics review of this kit in the 1950s even points this problem out.
I am constantly amazed at how much untouched Lobaugh product continues to surface. I even have the Lobaugh Suburban loco kit that I believe was one of the last locos Lobaugh offered under Al Ellis. This one was found at the Indy O meet some years ago. I have been told that very few of these were ever produced.
Lots of fun!
Joe
I have one of the Lobaugh 4-4-0 models in my collection. I believe Lobaugh advertised this as a New Haven 4-4-0 prototype. I have no idea how close it is to that loco. When I found the one I own it had an All Nation brass tender attached to it. A few years ago at the Cleveland O meet Bill Davis had an untouched Lobaugh Mongrel Mogul kit with the correct 4-4-0 tender and I purchased the kit from him. The correct tender is now behind my 4-4-0 and I found a Lobaugh slope backed tender kit on ebay a few months ago that, with a few modifications, will go behind the Mogul that is also now assembled. The Mogul currently has a Max Gray low side PRR tender behind it that I believe was made for their C-1 PRR 0-8-0 switcher. It looks OK behind the Mogul but I have another use for the PRR tender.
I ordered a pair of Lobaugh SP Switcher main rod castings from Bob Stevenson and used them on the Mogul mechanism instead of the very short main rods that came with the Mogul kit. The short main rods that came with the Mogul kit just do not look right and the MR trade Topics review of this kit in the 1950s even points this problem out.
I am constantly amazed at how much untouched Lobaugh product continues to surface. I even have the Lobaugh Suburban loco kit that I believe was one of the last locos Lobaugh offered under Al Ellis. This one was found at the Indy O meet some years ago. I have been told that very few of these were ever produced.
Lots of fun!
Joe
Joe Foehrkolb
- Rufus T. Firefly
- Posts: 42229
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Is this ugly or What?
rrjjf wrote:I even have the Lobaugh Suburban loco kit that I believe was one of the last locos Lobaugh offered under Al Ellis. This one was found at the Indy O meet some years ago. I have been told that very few of these were ever produced.
I believe that I have seen only one assembled if that was a 2-6-4T unlike the GEM 2-4-4T - either way I sort of regret not buying it, yet i have no good excuse for it nor even the GEM 2-4-4T that is now front & center on my bench. Blasted thing is a mess of corrosion that I will have to deal with soon before I fully lose access to facilities for cleaning this to a point where I might get a coat of primer on it to seal the surface.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Is this ugly or What?
I believe the Suburban was a 4-6-4T. I have only seen pictures. Pacific frame; smaller drivers, American boiler, cab forward lead truck under the tank, Climax tank . . .
The Mongrel, I think, had a small Vanderbilt. Lemme look . . . As with the Suburban, it was just a creative way to use leftover parts. There were rumors of a ten-wheeler using the same philosophy.
I have also never seen in the flesh the MoPac Mountain or the NP Challenger. Quite rare. I have sort of stopped "collecting" and now plan to finish all the fragments around here - starting with the Berk that will appear below.
The Mongrel, I think, had a small Vanderbilt. Lemme look . . . As with the Suburban, it was just a creative way to use leftover parts. There were rumors of a ten-wheeler using the same philosophy.
I have also never seen in the flesh the MoPac Mountain or the NP Challenger. Quite rare. I have sort of stopped "collecting" and now plan to finish all the fragments around here - starting with the Berk that will appear below.
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Is this ugly or What?
Under construction: First, a "Billy Davis" Mongrel - who knows where he gets these kits?
And here is the next Berk - although I am torn between this and my stalled D16sb project:
And here is the next Berk - although I am torn between this and my stalled D16sb project:
Re: Is this ugly or What?
bob turner wrote:And here is the next Berk
Here is "THE" Berk:
https://www.ebay.com/itm/O-Scale-2-RAIL ... Sw~o5aUSqo
Re: Is this ugly or What?
Joe;
The 4-4-0 is actually quite good, though a mix of features from several sub-classes if you build it "stock". Its easy to sort for a specific subclass or loco using some photos and changing a few bits.
I had one Tom Harley did that needed no apology whatsoever, and the kit will also build into a reasonable B&M version with some changes in furniture.
The 4-4-0 is actually quite good, though a mix of features from several sub-classes if you build it "stock". Its easy to sort for a specific subclass or loco using some photos and changing a few bits.
I had one Tom Harley did that needed no apology whatsoever, and the kit will also build into a reasonable B&M version with some changes in furniture.
- rex desilets
- Posts: 1786
- Joined: Sun Jul 15, 2007 2:18 pm
Re: Is this ugly or What?
For my sake, and Rufus', please pull out of your stall. And, why must it be a D16sb when a nice slide valve version would be so much more interesting?bob turner wrote:<nip>my stalled D16sb project:
“Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.” – John Adams
- Rufus T. Firefly
- Posts: 42229
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Is this ugly or What?
rex desilets wrote:For my sake, and Rufus', please pull out of your stall. And, why must it be a D16sb when a nice slide valve version would be so much more interesting?bob turner wrote:<nip>my stalled D16sb project:
Yes. Let's see that done and maybe a plain earlier D16b with 68" drivers, slide valves, etc.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
-
bob turner
- Posts: 13676
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Is this ugly or What?
What I was thinking of was a dual project - a D16 like the one at Strasburg, complete with stripes if I can get them in decal form, and an E2a - the one with canted cylinders. Boilers are similar, cabs may be too. Cylinders used to be easy, but for some reason they do not show up used in my price range any more. So I shall build three sets - one like 1223, one like #101 on p. 107 of "Pennsy Power", and one like #7375 on p. 131. That way, if I do (and manage to publish) a construction series, a builder could vary the parts to come up with any period PRR American or E3 thru E7 Atlantic.
I am not really sure of the availability of 80" drivers, so the D16 will have All Nation drivers. They, at least, seem to be relatively available. We could twist that new guy's arm to release a few sets?
I am not really sure of the availability of 80" drivers, so the D16 will have All Nation drivers. They, at least, seem to be relatively available. We could twist that new guy's arm to release a few sets?
Re: Is this ugly or What?
bob turner wrote:I am not really sure of the availability of 80" drivers, so the D16 will have All Nation drivers. They, at least, seem to be relatively available. We could twist that new guy's arm to release a few sets?
Do a little math to convert dimensions and use Slaters drivers from the UK. Never had a bad set, self quartering, insulated both sides, you could even choose to use the UK gearboxes which are available from multiple makers and compatible with their axles. Counterweights can be easily made up and applied, accurate ones rather than live with whatever incorrect ones might be cast in place.
You are doing small engines as a project for others to emulate, might as well use readily available quality components rather than start the article, "Go to shows until you find so-and-so drivers in some dead guy's parts bins. Perseverance will be important."
I turned Ed Reutling on to Slaters and other UK driving wheels many decades ago; worked for him. You probably could get spoked pony truck wheels now that I'm thinking of it, too.
Re: Is this ugly or What?
Bob Turner,
I have a good number of brand new All Nation drivers and can certainly send you a pair of small counterweight and large counterweight drivers. I have AN axles also but if I were building this loco I would ream out the drovers and insert 1/4 drill rod axles.
Let me know what you want and I will send the parts along to you. Keep on building!
Joe
I have a good number of brand new All Nation drivers and can certainly send you a pair of small counterweight and large counterweight drivers. I have AN axles also but if I were building this loco I would ream out the drovers and insert 1/4 drill rod axles.
Let me know what you want and I will send the parts along to you. Keep on building!
Joe
Joe Foehrkolb
- Rufus T. Firefly
- Posts: 42229
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Is this ugly or What?
sarge wrote: You are doing small engines as a project for others to emulate, might as well use readily available quality components rather than start the article, "Go to shows until you find so-and-so drivers in some dead guy's parts bins. Perseverance will be important."
Heresy!

Put him in the comfy chair and poke him with the soft cushions
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 58 guests