Things NOT To Do With Die-Cast!!!
- Rufus T. Firefly
- Posts: 42236
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Things NOT To Do With Die-Cast!!!
Basketball. Do not play basketball with your die-cast items.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
-
Seaboard Air Line Fan
- Posts: 1308
- Joined: Mon Mar 08, 2004 9:49 pm
- Location: Virginia
Re: Things NOT To Do With Die-Cast!!!
Boomerang. Do not play boomerang with die cast, even if it’s shaped like a boomerang 
BobD aka Drifty
The Crow Flies At Midnight
The Crow Flies At Midnight
Re: Things NOT To Do With Die-Cast!!!
Dodgeball might work, though...
- Rufus T. Firefly
- Posts: 42236
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Things NOT To Do With Die-Cast!!!
sarge wrote:Dodgeball might work, though...
If you can dodge die cast, you can dodge a ball.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
-
Seaboard Air Line Fan
- Posts: 1308
- Joined: Mon Mar 08, 2004 9:49 pm
- Location: Virginia
Re: Things NOT To Do With Die-Cast!!!
What about Pétanque? There was actually a Pétanque league in the area a few years back but I never played.
BobD aka Drifty
The Crow Flies At Midnight
The Crow Flies At Midnight
- Rufus T. Firefly
- Posts: 42236
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Things NOT To Do With Die-Cast!!!
Seaboard Air Line Fan wrote:What about Pétanque? There was actually a Pétanque league in the area a few years back but I never played.
I have no data point in that regard; test it and report back to us here.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
-
Seaboard Air Line Fan
- Posts: 1308
- Joined: Mon Mar 08, 2004 9:49 pm
- Location: Virginia
Re: Things NOT To Do With Die-Cast!!!
I can't find where I mentioned this but...the lugs that hold one of the side frames on, on one of the truck housings snapped off. It also contains one of the 2 nubs that the motor housing pivots on. So now that's 2 parts I need.
Here's a photo of the broke truck:
Here's a photo of the whole engine:
OK, so I called MTH and talked to Debbie. The price for just the truck (which is the thing I REALLY need) was $35 plus $15 shipping. I told her I'd have to think about it. These things are very common, it's the same truck that's on their RK F3.
The frame is holding fine, I tried super glue on the truck but it didn't hold. I may fabricate a piece to go across the width of the truck and glue it to both side frame lugs, probably have to do it on both trucks to keep everything level.
Here's a photo of the broke truck:
Here's a photo of the whole engine:
OK, so I called MTH and talked to Debbie. The price for just the truck (which is the thing I REALLY need) was $35 plus $15 shipping. I told her I'd have to think about it. These things are very common, it's the same truck that's on their RK F3.
The frame is holding fine, I tried super glue on the truck but it didn't hold. I may fabricate a piece to go across the width of the truck and glue it to both side frame lugs, probably have to do it on both trucks to keep everything level.
BobD aka Drifty
The Crow Flies At Midnight
The Crow Flies At Midnight
- Rufus T. Firefly
- Posts: 42236
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Things NOT To Do With Die-Cast!!!
Seaboard Air Line Fan wrote:......I tried super glue on the truck but it didn't hold.
JB Weld with a bit of reinforcement where possible, maybe....
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: Things NOT To Do With Die-Cast!!!
Yep! A strip of brass and some J.B. Weld. Just let the Weld cure a full 24 hours.
Running that red block Charlie.
Re: Things NOT To Do With Die-Cast!!!
I'm sorry. What a piece of shit. What will spontaneously break next after you glue this bit together?
I can't say much better for a company who expects you to foot the bill for the parts that have either suffered from contamination, poor metallurgy, or poor design such that every time you try anything the dam thing breaks more, given it is falling apart as easy as you say. I can't say much better for the mentality of the country of origin either; "if it loads on the container it no longer is our concern."
Do they think the expectation for a model of that age to not fall to bits is unrealistic? If that is indeed the position of the importer, that is bollocks. Put a seventy-year-old white-metal GMC NW2 in one hand and a postwar Lionel one in the other then revisit that ridiculous excuse for "quality" and "responsibility" in your mind.
I have to wonder what possesses you to even consider a replacement in-kind, let alone any further purchases from the importer. You don't have to accept it, and considering the value for money as remotely acceptable is condoning the foisting of crap at premium prices.
Scrap it and go elsewhere.
I can't say much better for a company who expects you to foot the bill for the parts that have either suffered from contamination, poor metallurgy, or poor design such that every time you try anything the dam thing breaks more, given it is falling apart as easy as you say. I can't say much better for the mentality of the country of origin either; "if it loads on the container it no longer is our concern."
Do they think the expectation for a model of that age to not fall to bits is unrealistic? If that is indeed the position of the importer, that is bollocks. Put a seventy-year-old white-metal GMC NW2 in one hand and a postwar Lionel one in the other then revisit that ridiculous excuse for "quality" and "responsibility" in your mind.
I have to wonder what possesses you to even consider a replacement in-kind, let alone any further purchases from the importer. You don't have to accept it, and considering the value for money as remotely acceptable is condoning the foisting of crap at premium prices.
Scrap it and go elsewhere.
- Rufus T. Firefly
- Posts: 42236
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Things NOT To Do With Die-Cast!!!
sarge wrote:What will spontaneously break next after you glue this bit together?
A good and valid question. When do you cut your losses and move on, and not look back.
Yup, a good, solid AN NW2 is hard to beat for durability.
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
-
Seaboard Air Line Fan
- Posts: 1308
- Joined: Mon Mar 08, 2004 9:49 pm
- Location: Virginia
Re: Things NOT To Do With Die-Cast!!!
Don't feel sorry Sarge, I agree with you. This is just the 1st time it happened to me and not someone else.
Of my 20 engines most are die cast or die cast with plastic shells. Only 5-6 are brass.
The end (opposite of the end that has the DOT-24 lettering) is very thin where the break occurred, doubt it's 1/16".
Some brass sheet and JB Weld should do the trick, although I may look for some new-ish trucks.
Of my 20 engines most are die cast or die cast with plastic shells. Only 5-6 are brass.
The end (opposite of the end that has the DOT-24 lettering) is very thin where the break occurred, doubt it's 1/16".
Some brass sheet and JB Weld should do the trick, although I may look for some new-ish trucks.
BobD aka Drifty
The Crow Flies At Midnight
The Crow Flies At Midnight
- Rufus T. Firefly
- Posts: 42236
- Joined: Wed May 16, 2007 7:52 am
- Location: To be Determined
Re: Things NOT To Do With Die-Cast!!!
Seaboard Air Line Fan wrote:Some brass sheet and JB Weld should do the trick, although I may look for some new-ish trucks.
Maybe an A-N set or even an entire drive?
What doesn’t kill you makes you stronger. It also gives you a lot of unhealthy coping mechanisms, trust issues, and a dark sense of humor.
Re: Things NOT To Do With Die-Cast!!!
Seaboard Air Line Fan wrote:OK, so I called MTH and talked to Debbie. The price for just the truck (which is the thing I REALLY need) was $35 plus $15 shipping. I told her I'd have to think about it. These things are very common, it's the same truck that's on their RK F3.
Bob, F units had Blomberg trucks. You can get them from P&D Hobby Shop via mail order. They have them in plastic and brass. Their stuff is good quality. Atlas bought their "F" unit line from P&D.
Re: Things NOT To Do With Die-Cast!!!
Rich:
Brass yes, but plastic no. Not anymore I'm afraid.
The MTH truck, if I understand correctly, is the same for both but with different sideframes as jewelry, typical of the drive style.
Bob's model has AAR Type A sideframes, so an old AN switcher drive converted to battery might really be the ticket.
Perhaps also the old pre-Bachmann Williams NW (copied from the Lionel postwar, which wasn't horrible as a scale unit) in its entirety would be a good inexpensive option. I seem to remember they did it in Seaboard...
Brass yes, but plastic no. Not anymore I'm afraid.
The MTH truck, if I understand correctly, is the same for both but with different sideframes as jewelry, typical of the drive style.
Bob's model has AAR Type A sideframes, so an old AN switcher drive converted to battery might really be the ticket.
Perhaps also the old pre-Bachmann Williams NW (copied from the Lionel postwar, which wasn't horrible as a scale unit) in its entirety would be a good inexpensive option. I seem to remember they did it in Seaboard...
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 44 guests